Merville SM.31

Last updated
SM.31
RoleHigh performance glider
National origin France
ManufacturerHelice G. Merville
DesignerR. Cartier
First flight11 January 1960
Number built1
Developed from Merville S.30

The Merville SM.31 is a French high performance glider with a laminar flow wing, first flown in 1960. Only one was built.

Contents

Design and development

In the 1960s, André Merville was president of the Boulogne- based company Helice G. Merville, which had been the chief supplier of wooden propellers for French aircraft since the end of World War I. He sought to broaden the firm's product range by producing both light aircraft and gliders. The SM.31 high-performance sailplane was a development of their S.30 (sometimes written SM.30). [1]

It is a wood-framed aircraft, covered with a mixture of plywood and fabric. Its wing was built around a single spar with ply covering from the spar around the leading edge and fabric aft. The smooth ply skin covers just over half the chord, matching the approximate distance over which the ideal NACA airfoil 654421 maintains laminar flow; the rest is fabric-covered, though the covering of the plain ailerons is a ply and fabric mixture. In plan the wing has a rectangular centre section reaching out to about 60% of the span. Its square tipped outer sections have a swept leading edge, giving them a 6° sweep at quarter chord and a taper ratio of 65%. The ailerons are each in two parts, operating differentially and occupying about 63% of the span; the rest of the trailing edge is filled with lift-increasing Fowler flaps. There are Schempp-Hirth type air brakes on the inner section at 57% chord. The wings are shoulder mounted with a dihedral of 2.5°. [2]

The fuselage of the SM.31 is ply covered over wooden frames and stringers. In section it is ovoid, deep and narrow in the single-seat cockpit area ahead of the wings. Its single-piece, blown perspex canopy occupies most of this forward region. It has a rounded profile which curves upwards into the upper fuselage line just ahead of the wing and is side opening. Aft, the fuselage tapers slowly to the tail, where the straight tapered tailplane and elevators are mounted on top. The fin is faired into the fuselage at its root but elsewhere the vertical tail is straight tapered and flat topped. The rudder, hinged behind the elevator trailing edge and extending down to the keel, is not balanced. All the fixed tail surfaces are ply covered, with fabric covered control surfaces. The SM.31 lands on a semi-recessed, unsprung monowheel, fitted with brakes and assisted by a fixed skid which stretches from nose the under the wing trailing edge together with a tail bumper protecting the rudder. [1] [2]

The SM.31's first flight was made on 11 January 1960. [2] The sole example still exists, though neither airworthy nor on display. Whether it is F-CCHN in the Ailes Ancienne collection in Toulouse or F-CBYK at the Musée Régional de l'Air at Angers is not certain; one is probably the SM.30 and the other the SM.31. [3] [4]


Specifications

Data from The World's Sailplanes II (1963) p.84-5 [2]

General characteristics

Performance


Related Research Articles

Slingsby Skylark British single-seat glider, 1953

The Slingsby T.37 Skylark 1 was a small low-cost sailplane built during 1952-3 at Kirbymoorside, Yorkshire by Slingsby Sailplanes.

Slingsby Sky British single-seat glider, 1950

The Slingsby Type 34 Sky is a high performance single seat competition sailplane built in the United Kingdom. It was successful in major events, particularly in the World Gliding Championships of 1952.

Slingsby Skylark 4 British competition glider, 1961

The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.

The Akaflieg Darmstadt D-34 sailplanes were a series of experimental single seat sailplanes, designed at the University of Darmstadt in the 1950s and early 1960s to explore the structural and aerodynamic advantages of the then emerging plastics and composite materials.

Antonov A-9

The Antonov A-9 was a single-seat sailplane designed and built in the USSR in the 1940s, a development of the record setting Red Front 7.

Cijan-Obad Orao

The Cijan-Obad Orao is a competition single seat sailplane designed in Yugoslavia just after World War II, one of the most advanced of its type at the time. It flew in three World Gliding Championships, having greatest success at its first in 1950 when it reached third place.

The Kirigamine Mita is a training glider, seating two in tandem, designed in Japan in the early 1960s. A modified version, first flown in 1966, was produced in modest numbers.

Maeda 703

The Maeda 703 was one of the first indigenous Japanese gliders, a high performance single seat aircraft which first flew in 1940. Three were built, two with gull wing wings; one of these set a national endurance record in 1941.

CVV 8 Bonaventura

The CVV 8 Bonaventura was a two-seat competition glider designed and built in Italy during the 1950s. Fifteen were produced.

DFS Rhönsperber German single seat competition glider, 1937

The DFS Rhönsperber, otherwise known as the Schweyer Rhönsperber or Jacobs Rhönsperber was a single seat competition glider designed in Germany by Hans Jacobs and first flown in 1935. For several years it was regarded as the best German sailplane and about one hundred were built.

Schleicher Rhönadler German single-seat glider, 1932

The Schleicher Rhönadler, DFS Rhönadler or Jacobs Rhönadler is a high performance, single seat competition sailplane built in Germany in the 1930s. More than 65 were built.

The Scheibe SF-30 Club-Spatz is a 15 m class single seat sailplane built in Germany in the 1970s and intended for club use.

The IIL IS-4 was a single seat, high performance sailplane designed by Iosif Șilimon and built in Romania in the late 1950s.

The IIL IS-7 was a two-seat, sailplane designed by Iosif Șilimon and built in Romania in the late 1950s. Only one prototype was built.

The IIL IS-8 was a two-seat sailplane designed by Iosif Șilimon and built in Romania in 1960. They served with Romanian gliding clubs.

The IIL IS-10 was a high-performance, single-seat glider, designed and built in Romania in the early 1960s. It was the first Romanian aircraft to use laminar flow airfoils.

The IIL IS-11 was an aerobatic, single seat glider, designed and built in Romania in 1959. It was built in small numbers.

Schneider ES-57 Kingfisher

The Schneider ES-57 Kingfisher is a low-cost, short-span Australian glider capable of respectable cross country soaring flights. It was produced in small numbers in the late 1950s.

The Schneider ES-56 Nymph was a short span, Australian glider with a laminar flow wing, built in the 1950s. Only four were built.

Zlin Z-25 Šohaj

The Zlín Šohaj series of club gliders began as a post World War II development of the DFS Olympia Meise. A large number were built in the 1940s and '50s.

References

  1. 1 2 3 4 Taylor, John W R (1964). Jane's All the World's Aircraft 1964-65. London: Sampson Low, Marston & Co. Ltd. pp. 47, 358.
  2. 1 2 3 4 Shenstone, B.S.; Wilkinson, K.G. (1963). The World's Sailplanes. Vol. II. Organisation Scientifique et Technique Internationale du Vol à Voile (OSTIV) and Schweizer Aero-Revue. pp. 84–5.
  3. ↑ "Murville SM.31" . Retrieved 14 March 2014.
  4. ↑ Ogden, Bob (2009). Aviation Museums and Collections of Mainland Europe. Air Britain (Historians) Ltd. pp. 126, 147. ISBN   978 0 85130 418 2.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.