Milwaukee Road class A

Last updated
Milwaukee Road Class A
Hiawatha Milwaukee Road Postkarte 1935.jpg
A postcard depicts the Milwaukee Road class A #2 in 1935.
Type and origin
Builder American Locomotive Company
Serial number68684 (1), 68685 (2), 68729 (3), 68828 (4)
Build dateMay 1935 (2), May 1936, April 1937
Total produced4
Specifications
Configuration:
   Whyte 4-4-2
   UIC 2′B1′ h2
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Driver dia.84 in (2,134 mm)
Length88 ft 8 in (27.03 m)
Adhesive weight 144,500 lb (65,500 kilograms; 65.5 metric tons)
Total weight537,000 lb (244,000 kilograms; 244 metric tons)
Fuel type Oil
Fuel capacity4,000 US gal (15,000 L; 3,300 imp gal)
Water cap.13,000 US gal (49,000 L; 11,000 imp gal)
Boiler pressure300  psi (2.07  MPa)
Heating surface:
  Firebox69 sq ft (6.4 m2)
  Total surface3,245 sq ft (301.5 m2)
Superheater:
  Heating area1,029 sq ft (95.6 m2)
Cylinders Two
Cylinder size 19 in × 28 in (483 mm × 711 mm)
Performance figures
Maximum speed112.5 mph (181 km/h)
Tractive effort 30,685 lbf (136.49 kN)
Factor of adh. 4.71
Career
Operators Milwaukee Road
Class A
Numbers1 – 4
Retired1949–1951
DispositionAll scrapped.

The Milwaukee Road Class "A" was a class of high-speed, streamlined 4-4-2 "Atlantic" type steam locomotives built by the American Locomotive Company (ALCO) from 1935 to 1937 to haul the Milwaukee Road's Hiawatha express passenger trains. Numbered from No. 1 to No. 4, they were among the last Atlantic type locomotives built in the United States, and certainly the largest and most powerful. The class were the first locomotives in the world built for daily operation at over 100 mph (160 km/h), and the first class built completely streamlined, bearing their casings their entire lives. Although partially supplanted by the larger class "F7" Hudsons from 1937, they remained in top-flight service until the end. Locomotive No. 3 was taken out of service in 1949 and cannibalized for spare parts to keep the other three running until 1951.

Contents

History

Milwaukee Road class A No. 1 pauses near Milwaukee in 1951. Hiawatha streamlined steam locomotive 1951.JPG
Milwaukee Road class A No. 1 pauses near Milwaukee in 1951.

Designed for a 6+12 hour schedule between Chicago and St. Paul, the class proved capable of handling nine cars on a 6+14 hour schedule. The only change during their service life was the addition of a Mars Light beneath the winged emblem on the nose in 1947.

They hauled the fastest scheduled steam-powered trains in the world. Running at 100 mph (160 km/h) or greater was required to keep these schedules; the class A locomotives were designed to cruise at over 100 mph and be able to achieve 120 mph (190 km/h). A run with a dynamometer car behind the locomotive was made on May 15, 1935, by locomotive No. 2 between Milwaukee and New Lisbon, Wisconsin. Over a 14-mile (23 km) stretch the speed of 112.5 mph (181.1 km/h) was recorded. This was the fastest authenticated speed reached by a steam locomotive at the time, making No. 2 the record holder for steam traction speed and the first steam locomotive to top 110 mph (180 km/h). There are reports that these locomotives could exceed 120 miles per hour (190 km/h). Such speeds would have put the class A in contention with the LNER Class A4 and German BR 05 for the title of fastest steam locomotive until that time, but no official records have been recovered. The successor Milwaukee Road class F7 was even more powerful, with a claimed top speed of 125 mph (201 km/h).

The design was fairly conventional but unusual in some aspects. One goal was reducing reciprocating mass, which could not be completely balanced. This was the reason for the high boiler pressure of 300 psi (2.07 MPa), which allowed smaller pistons. The reciprocating mass of the connecting rods was also reduced with the use of four driving wheels rather than six. The main rods connected to the first pair of driven wheels rather than the (more conventional) second; again, this reduced the reciprocating mass as well as providing more even power throughout the stroke. The large 84-inch (2.134 m) diameter driving wheels reduced piston speed and made high speed less taxing on the machinery. The streamlined casings were designed to open easily for servicing; the front end had clamshell doors ahead of the smokebox.

Table of locomotive [1] :32
Milwaukee
Road no.
Alco
serial no.
BuiltRetired
168684May 1935November 1951
268685May 1935November 1951
368729May 1936September 1949
468828April 1937June 1951

Related Research Articles

<span class="mw-page-title-main">LNER Class A4</span> Class of locomotives designed by Sir Nigel Gresley

The LNER Class A4 is a class of streamlined 4-6-2 steam locomotive designed by Nigel Gresley for the London and North Eastern Railway in 1935. Their streamlined design gave them high-speed capability as well as making them instantly recognisable, and one of the class, 4468 Mallard, holds the record as the world's fastest steam locomotive. Thirty-five of the class were built to haul express passenger trains on the East Coast Main Line route from London Kings Cross via York to Newcastle, and later via Newcastle to Edinburgh, Scotland. They remained in service on the East Coast Main Line until the early 1960s when they were replaced by Deltic diesel locomotives; they themselves proving to be worthy successors to the A4s. Several A4s saw out their remaining days until 1966 in Scotland, particularly on the Aberdeen – Glasgow express trains, for which they were used to improve the timing from 3.5 to 3 hours.

<span class="mw-page-title-main">4-6-4</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of locomotives, 4-6-4 represents the wheel arrangement of four leading wheels, six powered and coupled driving wheels and four trailing wheels. In France where the type was first used, it is known as the Baltic while it became known as the Hudson in most of North America.

<span class="mw-page-title-main">Streamliner</span> Vehicle incorporating streamlining in a shape providing reduced air resistance

A streamliner is a vehicle incorporating streamlining in a shape providing reduced air resistance. The term is applied to high-speed railway trainsets of the 1930s to 1950s, and to their successor "bullet trains". Less commonly, the term is applied to fully faired upright and recumbent bicycles. As part of the Streamline Moderne trend, the term was applied to passenger cars, trucks, and other types of light-, medium-, or heavy-duty vehicles, but now vehicle streamlining is so prevalent that it is not an outstanding characteristic. In land speed racing, it is a term applied to the long, slender, custom built, high-speed vehicles with enclosed wheels.

LNER Class A4 4468 <i>Mallard</i> Preserved British steam locomotive

LNER Class A4 4468 Mallard is a 4-6-2 ("Pacific") steam locomotive built in 1938 for operation on the London and North Eastern Railway (LNER) at Doncaster Works to a design of Nigel Gresley. Its streamlined, wind tunnel tested design allowed it to haul long distance express passenger services at high speeds. On 3 July 1938, Mallard broke the world speed record for steam locomotives at 126 mph (203 km/h), which still stands today.

<span class="mw-page-title-main">4-4-2 (locomotive)</span> Railway locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives by wheel arrangement, 4-4-2 represents a configuration of a four-wheeled leading bogie, four powered and coupled driving wheels, and two trailing wheels supporting part of the weight of the boiler and firebox. This allows a larger firebox and boiler than the 4-4-0 configuration.

<span class="mw-page-title-main">Pennsylvania Railroad class T1</span> Class of 52 4-4-4-4 duplex locomotives

The Pennsylvania Railroad (PRR) class T1 duplex-drive 4-4-4-4 steam locomotives, introduced in 1942 with two prototypes and later in 1945-1946 with 50 production examples, were the last steam locomotives built for the PRR and arguably its most controversial. They were ambitious, technologically sophisticated, powerful, fast and distinctively streamlined by Raymond Loewy. However, they were also prone to wheelslip both when starting and at speed, in addition to being complicated to maintain and expensive to run. The PRR decided in 1948 to place diesel locomotives on all express passenger trains, leaving unanswered questions as to whether the T1's flaws were solvable, especially taking into account that the two prototypes did not have the problems inherent to the production units.

<span class="mw-page-title-main">4-4-4</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 4-4-4 represents the wheel arrangement of four leading wheels on two axles, four powered and coupled driving wheels on two axles, and four trailing wheels on two axles. In the United States, this arrangement was named the Reading type, since the Philadelphia and Reading Railroad was the first to use it. In Canada, this type is known as the Jubilee.

<span class="mw-page-title-main">Pennsylvania Railroad class S1</span> Experimental American 6-4-4-6 duplex locomotive

The PRR S1 class steam locomotive was a single experimental duplex locomotive of the Pennsylvania Railroad. It was designed to demonstrate the advantages of duplex drives espoused by Baldwin Chief Engineer Ralph P. Johnson. It was the longest and heaviest rigid frame reciprocating steam locomotive that was ever built. The streamlined Art Deco styled shell of the locomotive was designed by Raymond Loewy.

<i>Twin Cities 400</i> Former passenger train service between Chicago and Saint Paul

The 400 was a named passenger train operated by the Chicago and North Western Railway between Chicago and Saint Paul, with a final stop in Minneapolis. The train took its name from the schedule of 400 miles between the cities in 400 minutes, and was also a nod to "The Four Hundred Club", a term coined by Ward McAllister to refer to the social elite of New York City in the late 19th century. It was an express train with limited stops between Chicago and the Twin Cities. The "400" ran from 1935 to 1963 on the Chicago to Twin Cities route. The C&NW later named their other passenger trains using the number "400".

<span class="mw-page-title-main">Milwaukee Road class F7</span> Class of 6 streamlined 4-6-4 steam locomotives

The Milwaukee Road's class "F7" comprised six (#100–#105) high-speed, streamlined 4-6-4 "Baltic" (Hudson) type steam locomotives built by the American Locomotive Company (ALCO) in 1937–38 to haul the Milwaukee's Hiawatha express passenger trains. Following on from the success of the road's class "A" 4-4-2s, the F7s allowed the road to haul heavier trains on the popular Chicago–Twin Cities routes.

<span class="mw-page-title-main">Milwaukee Road class F6</span> Class of 14+8 two-cylinder 4-6-4 locomotives

The Milwaukee Road classes F6 and F6-a comprised twenty-two steam locomotives of the 4-6-4 configuration, commonly nicknamed “Hudson” but known as “Baltic” on the Milwaukee Road.

The Atchison, Topeka and Santa Fe Railway's 3460 class comprised six 4-6-4 J3a "Super Hudson" type steam locomotives built in 1937 by the Baldwin Locomotive Works for service between La Junta, Colorado and Chicago, Illinois, a fairly flat division of the railroad suited for the 4-6-4 type. They were substantially larger than the road's earlier 3450 class locomotives, and all were built oil-fired, although in a manner that would allow for easy conversion to coal firing. All were fitted with SKF roller bearings on every axle.

<span class="mw-page-title-main">Norfolk and Western J Class (1941)</span> Class of 14 American 4-8-4 locomotives

The Norfolk and Western J class was a class of 14 4-8-4 "Northern" streamlined steam locomotives built by the Norfolk and Western Railway (N&W) at its Roanoke Shops in Roanoke, Virginia, between 1941 and 1950. The most powerful 4-8-4 locomotives ever produced, the J class were part of the N&W's "Big Three" that represented the pinnacle of steam technology.

<span class="mw-page-title-main">South Australian Railways 520 class</span> Class of 12 Australian 4-8-4 locomotives

The South Australian Railways 520 class, also known as "The Whispering Giants", is a class of streamliner 4-8-4 steam locomotive operated by the former South Australian Railways. The 520 class is one of the fastest Australian-built steam locomotives, with engine 520 holding a verified speed record of over 78mph on the Port Pirie line on the 10th of November, 1943.

Class E6 on the Pennsylvania Railroad was the final type of 4-4-2 "Atlantic" locomotive built by the railroad, and second only to the Milwaukee Road's streamlined class A in size, speed and power. Although quickly ceding top-flight trains to the larger K4s Pacifics, the E6 remained a popular locomotive on lesser services and some lasted to the end of steam on the PRR. One, #460, called the Lindbergh Engine, is preserved at the Railroad Museum of Pennsylvania. It was moved indoors to begin preparations for restoration on March 17, 2010. On January 10, 2011, PRR #460 was moved to the museum's restoration shop for a two- to three-year project, estimated to cost $350,000. The engine is listed in the National Register of Historic Places.

<span class="mw-page-title-main">DRG Class 61</span>

The two German DRG Class 61 steam engines were express train locomotives specifically built by Henschel for the Henschel-Wegmann train in service with the Deutsche Reichsbahn. The Henschel-Wegmann train was an initiative of the German locomotive construction industry, intended to be able to demonstrate a powerful steam locomotive-hauled train alongside the emerging express diesel multiple units, such as the Hamburg Flyer.

<i>Twin Cities Hiawatha</i> Former passenger train from Chicago to Minneapolis–Saint Paul

The Twin Cities Hiawatha, often just Hiawatha, was a named passenger train operated by the Chicago, Milwaukee, St. Paul and Pacific Railroad, and traveled from Chicago to the Twin Cities. The original train takes its name from the epic poem The Song of Hiawatha by Henry Wadsworth Longfellow. There are a number of Hiawatha-themed names within the city of Minneapolis, the terminus of the original train. The first Hiawatha ran in 1935; in 1939 the Milwaukee Road introduced a second daily trip between Chicago and Minneapolis. The two trains were known as the Morning Hiawatha and Afternoon Hiawatha, or sometimes the AM Twin Cities Hiawatha and PM Twin Cities Hiawatha. The Milwaukee Road discontinued the Afternoon Hiawatha in 1970 while the Morning Hiawatha continued running until the formation of Amtrak in 1971.

<span class="mw-page-title-main">Chicago and North Western E-2 Class</span>

The Chicago and North Western Railway's Class E-2 was a 4-6-2 "Pacific" type locomotive built by the American Locomotive Company in Schenectady, New York in 1923. Twelve were originally built, and all were later converted. Four of these locomotives gained the Class E-2-a designation in late 1934 when they were converted to burn oil instead of coal, upgraded with larger drivers, and had other changes made in order to run at higher speeds in preparation for pulling the Twin Cities–Chicago 400 the next year. The other eight were converted to Class E-2-b, which was similar except they remained coal-fired.

<span class="mw-page-title-main">Duplex locomotive</span> Type of steam locomotive

A duplex locomotive is a steam locomotive that divides the driving force on its wheels by using two pairs of cylinders rigidly mounted to a single locomotive frame; it is not an articulated locomotive. The concept was first used in France in 1863, but was particularly developed in the early 1930s by the Baldwin Locomotive Works, the largest commercial builder of steam locomotives in North America, under the supervision of its then chief engineer, Ralph P. Johnson.

<span class="mw-page-title-main">MÁV Class 242</span>

MÁV Class 242 was a 4-4-4T steam locomotive of Hungarian State Railways. A small class of only four examples, they were built between 1936 and 1939. They were highly unusual in that they were streamlined tank locomotives.

References

  1. Edson, William D. (Spring 1977). "Milwaukee Road Locomotives". Railroad History . 136. Boston, Massachusetts: Railway and Locomotive Historical Society: 28–129. JSTOR   43523968.