Miss Nylex catamaran

Last updated
Miss Nylex
Miss Nylex catamaran.jpg
Miss Nylex catamaran (photo: Chris Wilson)
Yacht clubBlairgowrie Yacht Squadron
NationAustralia
ClassC-Class catamaran
Sail noKA29
Designer(s)Roy Martin
BuilderLen Dobson
Launched1972
Owner(s)Nylex Corporation Ltd
FateDonated to Australian National Maritime Museum in 1988
Racing career
SkippersChris Wilson (1972)
Bruce Proctor (1974 - 1976)
Notable victoriesInternational Catamaran Challenge Trophy 1974
Specifications
TypeCatamaran
Length25 feet
Beam14 feet
Mast height36 feet
Sail area300 square feet
CrewJohn Buzaglo (1972)
Graeme Ainslie (1974 - 1976)

Miss Nylex is a C-Class racing catamaran, designed and built in Australia in the 1970s specifically to compete in the International Catamaran Challenge Trophy (ICCT). It has a single wingsail with two aerodynamic flaps, instead of the conventional mast and sail combination. [1]

Contents

Miss Nylex won the ICCT in 1974 and was the first catamaran in the world to win the race using a wingsail. The wingsail design was revolutionary for its time and changed the course of C-Class catamaran racing. All winners of the ICCT from 1977 to 2007 were subsequently won using wingsail designs. [2]

Miss Nylex was designed by Roy Martin [3] and built by Victorian boatbuilder Len Dobson. [4] When launched in 1972, it was the fastest catamaran in the world, breaking the speed record for an Australian yacht at 24 knots. [4]

History

The story of Miss Nylex began in 1971 when a syndicate was established to build a yacht to defend the ICCT, which Australia had won from Denmark in 1970. [2] The 1970 win had brought the trophy ‘down under’ for the first time and the Sorrento Sailing Club [5] was tasked with defending the trophy and hosting the event on Port Phillip Bay near Melbourne. [1] The ICCT was also known at the time as the ‘Little America’s Cup’ due to similarities in the selection process, elimination series and the actual final racing with the America's Cup.

The Miss Nylex syndicate was formed by John Buzaglo (later OAM) [6] and Frank Strange, with backing by the founder of the Nylex Corporation, Peter (later Sir Peter) Derham. The syndicate also included Chris Wilson, [7] Leon Ward and boat designer Roy Martin. [4]

Buzaglo and Strange had known the yacht designer and automotive engineer Roy Martin since the early 1960s through local Melbourne sailing networks, including the Australian Catamaran Association. Roy Martin had designed catamarans for their business, Sailcraft Australia, and they decided that he was the best person to design a new yacht to defend the trophy. [8]

Since 1965, the ICCT had been sailed over a course of a set shape and length, laid out carefully according to the prevailing wind direction. Most of the race was spent beating to windward or broad reaching. The syndicate decided that the new boat would need to perform well under these conditions. After assessing the likely challenger from the United States, the syndicate decided that the existing defender, Quest III (ICCT winner in 1970), would probably be superior, giving them the freedom to experiment with something new without jeopardising Australia's chance of winning. [1]

Drawing on his aeronautical expertise, designer Roy Martin developed a 'rigid aerofoil rig' or solid wingsail, which was highly efficient in upwind sailing conditions. Designers in the United States and Denmark had been experimenting with wingsails, but without much success in racing conditions (e.g. Patient Lady II). [1]

An experimental 25-foot model wing was built and tested to see if the concept would work. The test wingsail was mounted on the hulls of the catamaran ‘The Adventurer’, another Roy Martin design developed for Sailcraft Australia. The test wingsail is currently on display in the foyer of the Blairgowrie Yacht Squadron, Victoria Australia (as at January 2018). [9]

The test wingsail model was successful and proved that the concept worked, so the syndicate proceeded with building the full 36-foot wingsail version that became Miss Nylex, at a cost of approximately AUD$7000. [10] The boat was built by Victorian boatbuilder Len Dobson. [4]

Upwind, Miss Nylex had no equal and at the time was the fastest catamaran in the world, breaking the speed record for an Australian yacht at 24 knots. [2] Miss Nylex also beat 18-foot skiffs on Sydney Harbour in a 'Cock-o-the-Harbour' speed race. [4]

However, early versions of Miss Nylex were problematic and the boat had too much power when sailing downwind in winds of over 20 knots. In these conditions, the wing was so powerful that the crew were unable to control the craft. [8] When broad reaching, the boat tended to veer to leeward in gusts over 25 knots. [10] These problems were refined over time and reliability improved.

1972 - development

In 1972, eight contenders competed in the ICCT Australian selection trials. [8] Miss Nylex was highly competitive and considered by many to be the superior boat, but the selectors (Jock Sturrock, Russ Gibbons and Bob Clark) [11] conservatively opted for Quest III, the Charlie and Lindsay Cunningham entrant, as the Australian contender for that series. Miss Nylex was faster in the trials, but the syndicate did not have a spare wingsail if anything got damaged during the race and the selectors were also cautious about the reliability of the revolutionary new design.

The defence of the trophy was hosted in February 1972 by the Sorrento Sailing Club [5] against a challenge by Weathercock of the USA. Quest III had been highly tuned during the selection trials and comfortably beat Weathercock four races to nil, winning the trophy for Australia for a second time. [8] This kept the trophy at Sorrento Sailing Club, [5] the neighbouring club to Blairgowrie Yacht Squadron [12] where Miss Nylex was based, which gave the syndicate the opportunity to further develop the wingsail design.

1974 - wingsail wins

For the Australian selection trials in 1974, the design of Miss Nylex had been refined and the wingsail rig had been modified to eliminate many of the earlier problems of too much power in high winds. A new wingsail had been built and the original wingsail was kept as a reserve in case of damage. The rigging had been modified to allow much greater wing rotation for downwind sailing and for reducing power in heavy weather conditions. [11]

In 1974, Charlie and Lindsay Cunningham decided not to enter Quest III in the selection trials. [8] leaving three boats to contest the trials: Helios, a Sydney-based entrant with an innovative Lock Crowther designed multi-section wing; Panther, considered to be a sister boat to Quest III; and Miss Nylex. [11]

Miss Nylex won the trials and Australia accepted a challenge from New Zealand with their boat ‘Miss Stars’ (Sail Number KZ2). Miss Stars had an interesting solid backward-curved wing mast that covered about one third of the sail area. [2] Miss Stars was competitively sailed by helmsman Brett de Thier, but was heavier and less efficient than Miss Nylex, which was sailed by an experienced crew of Bruce Proctor (helmsman) and Graeme Ainslie, who had both sailed on Quest III in the successful 1972 campaign. [11] Australia beat New Zealand, four races to nil. [8]

Although Miss Nylex had a known weakness in very light winds, all four races were sailed in favourable 12 to 18 knot winds and in every race Miss Nylex took the lead from the starting line. The smallest margin between the boats in any heat at the first windward mark was one minute 20 seconds. Miss Nylex won the first race by almost 22 minutes and Miss Stars’ best result was approximately nine minutes behind Miss Nylex in the third race. [8]

Australia's victory with the new wingsail design was a world first in yacht racing. Roy Martin was named Victorian Yachtsman of the Year 1974, which was the first time a yacht designer had won this award.

1976 - wingsail vs sail

In the lead up to the next ICCT race held in 1976, the Miss Nylex syndicate decided to use basically the same wingsail rig design as used in 1974, figuring that the original concept had been successful and that there was no point in making significant changes until the advantages and disadvantages of the initial design were fully tested. The syndicate also decided to retain the tried and tested original 1974 crew of Bruce Proctor and Graeme Ainslie. [1]

After a successful selection trial campaign, Miss Nylex was chosen to defend the ICCT trophy for a second time, seeing off a challenge in the trials of a resurrected Quest III.

Miss Nylex was known to be superior in winds over 15 knots, which meant that race day weather conditions would significantly influence the result. Race organisers and syndicate members were aware of this, but took the risk knowing that 12 to 20 knot winds commonly prevailed off Sorrento, where the race was to be held. [1]

Australia accepted a challenge from the United States with their boat Aquarius V (Sail Number US76).

Weather and wind strength did indeed prove to be the deciding factor in the 1976 series. Aquarius V had a conventional mast and soft sail rig and was superior in light winds, while Miss Nylex outperformed Aquarius V in winds above 12 knots. After five races, Aquarius V was down two races to three against Miss Nylex, but light winds in the final two races enabled Aquarius V to come from behind and win the series, taking back the trophy to the United States for the first time since 1961. [8]

After the 1976 race, Miss Nylex was offered for sale to Tony Di Mauro of Connecticut, owner of C-Class catamaran 'Patient Lady', but he declined due to the price being too high, saying it would cost him over AUD$30,000 to purchase the boat. [13] The syndicate disbanded, as a new sponsor could not be found to contest the 1977 challenge series and Miss Nylex was placed into storage. [8]

Design and construction

Miss Nylex has an aerofoil wingsail similar to an aircraft wing with two trailing edge flaps, which are attached with simple hinges. With the flaps attached, it weighs approximately 68 kg. The total weight of the boat is approximately 318 kg. [1] [10]

The wingsail is an all timber structure glued together with Araldite, with no metal fastenings. It is built around a main spar of plywood with flanges of aircraft quality spruce. The ribs are balsa, covered on the leading edge with plywood. Balsa was used to keep the weight down, while still being considered strong enough for the purpose. [1] [10]

The wingsail is covered with terylene sailcloth and the whole wing surface was finished with white durathane paint, which was painted on at the Moorabbin Airport in Melbourne. [10]

In 1975, the rig was modified to allow greater mast rotation downwind and windows were added to the wing and a flap, which gave the helmsman greater indication of air flow on the leeward side of the rig. The window in the wingsail is an identifying feature of the second boat that was built. [8]

Miss Nylex has narrow, deep, round-bottomed hulls made of fibreglass and balsa wood sandwich. This shape was relatively conventional for top C Class catamarans in the 1970s. A catamaran's position in the water can vary from both hulls partially immersed (level trim) to one hull completely out of the water (full heel). The hull shape chosen for Miss Nylex had the lowest wetted surface area over the widest range of heel angles. [1]

The second set of hulls, used for the 1976 campaign, was built by the Commonwealth Aircraft Corporation in Melbourne (where Roy Martin once worked). [4] These were based on the original hulls made by Len Dobson, but were approximately 45 kg lighter. [13]

The decks are made of the same fibreglass/balsa sandwich structure as the hulls and are also covered with heavy terylene cloth. The beams are made of high strength aluminium alloy tubes. The centreboards and rudders were also carefully designed to maximise performance and are made of highly polished wood to minimise drag. [1]

All materials were readily available at the time, which enabled repairs to be done simply and quickly. [1]

Operation

Compared to conventional catamarans at the time, the control gear on Miss Nylex was quite simple. The main wingsail control system consists of a main sheet for controlling the angle of the wingsail relative to the boat, and various flap angle controls. Standard yacht fittings were used and very few special parts were required. [1]

The flaps are controlled by a simple bell crank attached to the leading edge with two control wires running down through the wingsail to a simple lever system at the base of the wing, which rotates and allows the flaps to be set properly on each tack. The flaps are adjusted by two rope sheets, one on each side. [1] [10]

Although the crew had very few controls to work, practice was required to adapt to the revolutionary new design. For example, when tacking, the wingsail would sometimes gain power before the crew could reach the other side of the boat. [10]

The forces of the wingsail rig were so well distributed into the hulls that the control gear proved very reliable and no significant failures were experienced in the four or five main years that the boat raced. In moderate wind speeds, Miss Nylex was a surprisingly simple boat to sail, which enabled the crew to concentrate on boat handling and tactics, without being overworked. [1]

Current status

In the 1980s, Miss Nylex was restored to its original condition by members of the syndicate and other interested parties. It was donated to the Australian Maritime Museum in Sydney by the C-Class Catamaran Association, [14] where it is part of the National Maritime Collection and listed on the Australian Register of Historic Vessels. Miss Nylex was on display in the foyer of the Museum when it opened in 1991, but it has been in storage since 2006. [4]

Related Research Articles

<span class="mw-page-title-main">Sailing</span> Propulsion of a vehicle by wind power

Sailing employs the wind—acting on sails, wingsails or kites—to propel a craft on the surface of the water, on ice (iceboat) or on land over a chosen course, which is often part of a larger plan of navigation.

<span class="mw-page-title-main">Yacht</span> Recreational boat or ship

A yacht is a sailing or power vessel used for pleasure, cruising, or racing. There is no standard definition, though the term generally applies to vessels with a cabin intended for overnight use. To be termed a yacht, as opposed to a boat, such a pleasure vessel is likely to be at least 33 feet (10 m) in length and may have been judged to have good aesthetic qualities.

<span class="mw-page-title-main">America's Cup</span> Sailing race trophy

The America's Cup, informally known as the Auld Mug, is a trophy awarded in the sport of sailing. It is the oldest international competition still operating in any sport. America's Cup match races are held between two sailing yachts: one from the yacht club that currently holds the trophy and the other from the yacht club that is challenging for the cup. Matches are held several years apart on dates agreed between the defender and the challenger. There is no fixed schedule, but the races have generally been held every three to four years. The most recent America's Cup match took place in March 2021.

<span class="mw-page-title-main">Catamaran</span> Watercraft with two parallel hulls of equal size

A catamaran is a multi-hulled watercraft featuring two parallel hulls of equal size. It is a geometry-stabilized craft, deriving its stability from its wide beam, rather than from a ballasted keel as with a monohull boat. Catamarans typically have less hull volume, smaller displacement, and shallower draft (draught) than monohulls of comparable length. The two hulls combined also often have a smaller hydrodynamic resistance than comparable monohulls, requiring less propulsive power from either sails or motors. The catamaran's wider stance on the water can reduce both heeling and wave-induced motion, as compared with a monohull, and can give reduced wakes.

<span class="mw-page-title-main">Stars & Stripes (America's Cup syndicate)</span>

Stars & Stripes is the name of an America's Cup syndicate operated by Dennis Conner and its racing yachts. The name "Stars & Stripes" refers to the nickname often used for the flag of the United States. TDC was registered under the flag of the San Diego Yacht Club (SDYC).

<span class="mw-page-title-main">Proa</span> Type of multihull sailboat

Proas are various types of multi-hull outrigger sailboats of the Austronesian peoples. The terms were used for native Austronesian ships in European records during the Colonial era indiscriminately, and thus can confusingly refer to the double-ended single-outrigger boats of Oceania, the double-outrigger boats of Island Southeast Asia, and sometimes ships with no outriggers or sails at all.

<span class="mw-page-title-main">18ft Skiff</span>

The 18 ft Skiff is considered the fastest class of sailing skiffs. The class has a long history beginning with races on Sydney Harbour, Australia in 1892 and later in New Zealand. The boat has changed significantly since the early days, bringing in new technology as it became available. Because of the need of strength, agility and skill, the class is considered to be the top level of small boat sailing. Worldwide this boat is called the "18 Foot Skiff". It is the fastest conventional non-foiling monohull on the yardstick rating, with a score of 675, coming only third after the Tornado and Inter 20.

The International Catamaran Challenge Trophy is the formal name for the match racing series between two catamarans familiarly known the Little Americas Cup. While a championship series sailed between C Class catamarans does still exist, it is no longer known as the Little America's Cup.

A mast-aft rig is a sailboat sail-plan that uses a single mast set in the aft half of the hull. The mast supports fore-sails that may consist of a single jib, multiple staysails, or a crab claw sail. The mainsail is either small or completely absent. Mast-aft rigs are uncommon, but are found on a few custom, and production sailboats.

<span class="mw-page-title-main">Sailing hydrofoil</span> Sailboat with wing-like foils mounted under the hull

A sailing hydrofoil, hydrofoil sailboat, or hydrosail is a sailboat with wing-like foils mounted under the hull. As the craft increases its speed the hydrofoils lift the hull up and out of the water, greatly reducing wetted area, resulting in decreased drag and increased speed. A sailing hydrofoil can achieve speeds exceeding double and in some cases triple the wind speed.

<span class="mw-page-title-main">Wingsail</span> Variable-camber aerodynamic structure

A wingsail, twin-skin sail or double skin sail is a variable-camber aerodynamic structure that is fitted to a marine vessel in place of conventional sails. Wingsails are analogous to airplane wings, except that they are designed to provide lift on either side to accommodate being on either tack. Whereas wings adjust camber with flaps, wingsails adjust camber with a flexible or jointed structure. Wingsails are typically mounted on an unstayed spar—often made of carbon fiber for lightness and strength. The geometry of wingsails provides more lift, and a better lift-to-drag ratio, than traditional sails. Wingsails are more complex and expensive than conventional sails.

<span class="mw-page-title-main">Sailing yacht</span> Private sailing vessel with overnight accommodations

A sailing yacht, is a leisure craft that uses sails as its primary means of propulsion. A yacht may be a sail or power vessel used for pleasure, cruising, or racing. There is no standard definition, so the term applies here to sailing vessels that have a cabin with amenities that accommodate overnight use. To be termed a "yacht", as opposed to a "boat", such a vessel is likely to be at least 33 feet (10 m) in length and have been judged to have good aesthetic qualities. Sailboats that do not accommodate overnight use or are smaller than 30 feet (9.1 m) are not universally called yachts. Sailing yachts in excess of 130 feet (40 m) are generally considered to be superyachts.

<i>USA 17</i> Racing trimaran

USA-17 is a sloop rigged racing trimaran built by the American sailing team BMW Oracle Racing to challenge for the 2010 America's Cup. Designed by VPLP Yacht Design with consultation from Franck Cammas and his Groupama multi-hull sailing team, BOR90 is very light for her size being constructed almost entirely out of carbon fiber and epoxy resin, and exhibits very high performance being able to sail at 2.0 to 2.5 times the true wind speed. From the actual performance of the boat during the 2010 America's Cup races, it can be seen that she could achieve a velocity made good upwind of over twice the wind speed and downwind of over 2.5 times the wind speed. She can apparently sail at 20 degrees off the apparent wind. The boat sails so fast downwind that the apparent wind she generates is only 5-6 degrees different from that when she is racing upwind; that is, the boat is always sailing upwind with respect to the apparent wind. An explanation of this phenomenon can be found in the article on sailing faster than the wind.

<span class="mw-page-title-main">High-performance sailing</span> Optimizing sailboat speed

High-performance sailing is achieved with low forward surface resistance—encountered by catamarans, sailing hydrofoils, iceboats or land sailing craft—as the sailing craft obtains motive power with its sails or aerofoils at speeds that are often faster than the wind on both upwind and downwind points of sail. Faster-than-the-wind sailing means that the apparent wind angle experienced on the moving craft is always ahead of the sail. This has generated a new concept of sailing, called "apparent wind sailing", which entails a new skill set for its practitioners, including tacking on downwind points of sail.

<span class="mw-page-title-main">AC72</span> Class of racing catamaran yacht that was developed for the 2013 Americas Cup

The AC72 is a class of wingsail catamarans built to a box rule, which governs the construction and operation of yachts competing in the 2013 Louis Vuitton and the America's Cup races. The class was subsequently replaced by the smaller AC50 class.

James Wharram was a British multihull pioneer and designer of catamarans.

<span class="mw-page-title-main">AC50</span> Class of racing catamaran yacht that was developed for the 2017 Americas Cup

The AC50 was a wingsail catamaran development rule that governed the construction of the yachts used in the 2017 Louis Vuitton Cup and the 2017 America's Cup. Like the larger AC72s used in the 2013 America's Cup, AC50s used L-shaped daggerboard stabilizers as well as T-shaped rudder elevators that were able to generate enough lift to allow the boats to exit displacement mode in winds in excess of 7kt. Prototype versions of crossbeams, wingsails, appendages, as well as steering and trimming systems had been tested by all syndicates on AC45 platforms as surrogate yachts before building their AC50. The class allowed hydraulic control of the wingsails and appendages. Motors and computer automation was banned in the class. Each challenger team was only allowed to build one AC50 for competition and only six boats were built.

The following outline is provided as an overview of and topical guide to sailing:

<span class="mw-page-title-main">F50 (catamaran)</span> Class of catamaran

The F50 is a one-design foiling catamaran used in the SailGP race series. The F50s are adapted from the AC50s used in the America's Cup, with modifications including new control systems and modular wingsails. The F50s are one of the fastest racing classes in history, with a predicted top speed of 52.2 knots ; the current F50 speed record, achieved by the France SailGP Team at the Range Rover France Sail Grand Prix in 2022, stands at 53.96 knots.

<span class="mw-page-title-main">Hobie 17</span> Sailboat class

The Hobie 17 is an American catamaran that was designed by John Wake as a single-handed racer and first built in 1985.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Martin, Herbert Roy (1976). “The Catamaran Miss Nylex”. The SAE – Australasia, Journal of the Society of Automotive Engineers Australasia. 36 (5): 198-207.
  2. 1 2 3 4 Chevalier, Francois and Hydros Foundation (2015). The Exceptional History of the Little Cup. Abrams, New York. ISBN   978-1-4197-1943-1
  3. "Roy Martin". arhv.anmm.gov.au.
  4. 1 2 3 4 5 6 7 "Miss Nylex". arhv.anmm.gov.au.
  5. 1 2 3 "Sorrento Sailing Club". sscbc.com.au.
  6. "John Buzaglo". bys.asn.au.
  7. "Chris Wilson". bys.asn.au.
  8. 1 2 3 4 5 6 7 8 9 10 Wilson, Chris and Press, Max (1976). Catamaran Sailing to Win. pp. 22-53. Kaye & Ward, London and Methuen, Australia. ISBN   0718211928
  9. "On the Horizon Edition #97". bys.asn.au.
  10. 1 2 3 4 5 6 7 Wilson, Chris and Press, Max. (1972). Modern Boating. Sydney, Australia. 7 (5): 20-22.
  11. 1 2 3 4 Wilson, Chris and Press, Max. (1974). Modern Boating. Sydney, Australia. 9 (4): 102.
  12. "Blairgowrie Yacht Squadron". bys.asn.au.
  13. 1 2 Wilson, Chris and Press, Max. (1976). Modern Boating. Sydney, Australia.11 (6): 10-12, 101.
  14. "C-Class Cats Racing and News - C-Class Catamarans Official Website". International C-Class Catamaran Association.