Naphthalen-1,8-diyl 1,3,2,4-dithiadiphosphetane 2,4-disulfide

Last updated
Naphthalen-1,8-diyl 1,3,2,4-
dithiadiphosphetane 2,4-disulfide
Wireframe model of naphthalen-1,8-diyl 1,3,2,4-dithiadiphosphetane 2,4-disulfide Np2P2S4-2D-skeletal.png
Wireframe model of naphthalen-1,8-diyl 1,3,2,4-dithiadiphosphetane 2,4-disulfide
Ball and stick model of naphthalen-1,8-diyl 1,3,2,4-dithiadiphosphetane 2,4-disulfide Np2P2S4-3D-balls.png
Ball and stick model of naphthalen-1,8-diyl 1,3,2,4-dithiadiphosphetane 2,4-disulfide
Names
Preferred IUPAC name
Naphthalen-1,8-diyl 1,3,2,4-dithiadiphosphetane
2,4-disulfide
Systematic IUPAC name
3,14-Dithia-2λ5,4λ5-diphosphatetracyclo[7.3.1.

12,4.05,13]tetradeca-1(12),5,7,9(13),10-

pentaene-2,4-dithione
Identifiers
3D model (JSmol)
ChemSpider
PubChem CID
  • InChI=1S/C10H6P2S4/c13-11-8-5-1-3-

    7-4-2-6-9(10(7)8)12(14,15-11)

    16-11/h1-6H X mark.svgN
    Key: NYHOAPMWYNAQJE-UHFFF
    AOYSA-N X mark.svgN
  • InChI=1S/C10H6P2S4/c13-11-8-5-1-3-7-4-2-6-9(10(7)8)12(14,15-11)16-11/h1-6H
  • InChI=1S/C10H6P2S4/c13-11-8-5-1-3-7-4-2-6-9(10(7)8)12(14,15-11)16-11/h1-6H
    Key: NYHOAPMWYNAQJE-UHFFFAOYSA-N
  • S=P13SP(=S)(S1)c4c2c(cccc23)ccc4
Properties
C10H6P2S4
Molar mass 316.36 g mol−1
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
X mark.svgN  verify  (what is  Yes check.svgYX mark.svgN ?)

NpP2S4 is a compound related to Lawesson's reagent formed by the reaction of 1-bromonaphthalene with P4S10, [1] this is a 1,3,2,4-dithiadiphosphetane 2,4-disulfide which has a naphth-1,8-diyl group holding the two phosphorus atoms together. The mechanism by which the NpP2S4 forms is not yet elucidated, but it is thought to occur by a process involving free radicals, and naphthalene has been detected as a side product in its synthesis. In general, NpP2S4 has been found to be less reactive than Lawesson's reagent, in agreement with the hypothesis that the dithiophosphine ylides are responsible for the majority of the chemical reactions of the 1,3,2,4-dithiadiphosphetane 2,4-disulfides.

NpP2S4 has been found to react with many hydroxyl compounds, such as methanol, ethylene glycol and a catechol to form species with oxygen atoms bonded to the phosphorus atoms.

NpP2S4 when refluxed in methanol reacts to form a heterocycle C12H12OP2S with one O-methyl and one S-methyl bonded to the two phosphorus atoms. [1]

Npmethanol.jpg Npanti.jpg Npcate.jpg
The structure of the product of methanol and NpP2S4The structure of the first product of NpP2S4 with ethylene glycolThe structure of the product of di-tert-butylcatechol with NpP2S4

Related Research Articles

<span class="mw-page-title-main">Alcohol (chemistry)</span> Organic compound with at least one hydroxyl (–OH) group

In chemistry, an alcohol is a type of organic compound that carries at least one hydroxyl functional group bound to a saturated carbon atom. The term alcohol originally referred to the primary alcohol ethanol, which is used as a drug and is the main alcohol present in alcoholic drinks. An important class of alcohols, of which methanol and ethanol are the simplest examples, includes all compounds which conform to the general formula CnH2n+1OH. Simple monoalcohols that are the subject of this article include primary, secondary and tertiary alcohols.

In organic chemistry, a methyl group is an alkyl derived from methane, containing one carbon atom bonded to three hydrogen atoms, having chemical formula CH3. In formulas, the group is often abbreviated as Me. This hydrocarbon group occurs in many organic compounds. It is a very stable group in most molecules. While the methyl group is usually part of a larger molecule, bounded to the rest of the molecule by a single covalent bond, it can be found on its own in any of three forms: methanide anion, methylium cation or methyl radical. The anion has eight valence electrons, the radical seven and the cation six. All three forms are highly reactive and rarely observed.

<span class="mw-page-title-main">Haloalkane</span> Group of chemical compounds derived from alkanes containing one or more halogens

The haloalkanes are alkanes containing one or more halogen substituents. They are a subset of the general class of halocarbons, although the distinction is not often made. Haloalkanes are widely used commercially. They are used as flame retardants, fire extinguishants, refrigerants, propellants, solvents, and pharmaceuticals. Subsequent to the widespread use in commerce, many halocarbons have also been shown to be serious pollutants and toxins. For example, the chlorofluorocarbons have been shown to lead to ozone depletion. Methyl bromide is a controversial fumigant. Only haloalkanes that contain chlorine, bromine, and iodine are a threat to the ozone layer, but fluorinated volatile haloalkanes in theory may have activity as greenhouse gases. Methyl iodide, a naturally occurring substance, however, does not have ozone-depleting properties and the United States Environmental Protection Agency has designated the compound a non-ozone layer depleter. For more information, see Halomethane. Haloalkane or alkyl halides are the compounds which have the general formula "RX" where R is an alkyl or substituted alkyl group and X is a halogen.

An ylide or ylid is a neutral dipolar molecule containing a formally negatively charged atom (usually a carbanion) directly attached to a heteroatom with a formal positive charge (usually nitrogen, phosphorus or sulfur), and in which both atoms have full octets of electrons. The result can be viewed as a structure in which two adjacent atoms are connected by both a covalent and an ionic bond; normally written X+–Y. Ylides are thus 1,2-dipolar compounds, and a subclass of zwitterions. They appear in organic chemistry as reagents or reactive intermediates.

<span class="mw-page-title-main">Anisole</span> Methoxybenzene

Anisole, or methoxybenzene, is an organic compound with the formula CH3OC6H5. It is a colorless liquid with a smell reminiscent of anise seed, and in fact many of its derivatives are found in natural and artificial fragrances. The compound is mainly made synthetically and is a precursor to other synthetic compounds. It is an ether. Anisole is a standard reagent of both practical and pedagogical value.

<span class="mw-page-title-main">Thionyl chloride</span> Chemical compound

Thionyl chloride is an inorganic compound with the chemical formula SOCl
2
. It is a moderately volatile colourless liquid with an unpleasant acrid odour. Thionyl chloride is primarily used as a chlorinating reagent, with approximately 45,000 tonnes per year being produced during the early 1990s, but is occasionally also used as a solvent. It is toxic, reacts with water, and is also listed under the Chemical Weapons Convention as it may be used for the production of chemical weapons.

<span class="mw-page-title-main">Phosphorus triiodide</span> Chemical compound

Phosphorus triiodide (PI3) is an inorganic compound with the formula PI3. A red solid, it is a common misconception that PI3 is too unstable to be stored; it is, in fact, commercially available. It is widely used in organic chemistry for converting alcohols to alkyl iodides. It is also a powerful reducing agent. Note that phosphorus also forms a lower iodide, P2I4, but the existence of PI5 is doubtful at room temperature.

Iodomethane, also called methyl iodide, and commonly abbreviated "MeI", is the chemical compound with the formula CH3I. It is a dense, colorless, volatile liquid. In terms of chemical structure, it is related to methane by replacement of one hydrogen atom by an atom of iodine. It is naturally emitted by rice plantations in small amounts. It is also produced in vast quantities estimated to be greater than 214,000 tons annually by algae and kelp in the world's temperate oceans, and in lesser amounts on land by terrestrial fungi and bacteria. It is used in organic synthesis as a source of methyl groups.

<span class="mw-page-title-main">Dithiothreitol</span> Chemical compound

Dithiothreitol (DTT) is the common name for a small-molecule redox reagent also known as Cleland's reagent, after W. Wallace Cleland. DTT's formula is C4H10O2S2 and the chemical structure of one of its enantiomers in its reduced form is shown on the right; its oxidized form is a disulfide bonded 6-membered ring (shown below). The reagent is commonly used in its racemic form, as both enantiomers are reactive. Its name derives from the four-carbon sugar, threose. DTT has an epimeric ('sister') compound, dithioerythritol (DTE).

<span class="mw-page-title-main">Lawesson's reagent</span> Chemical compound

Lawesson's reagent (LR) is a chemical compound used in organic synthesis as a thiation agent. Lawesson's reagent was first made popular by Sven-Olov Lawesson, who did not, however, invent it. Lawesson's reagent was first made in 1956 during a systematic study of the reactions of arenes with P4S10.

<span class="mw-page-title-main">1,3,2,4-Dithiadiphosphetane 2,4-disulfides</span> Class of organic compounds with four P2S2 rings

1,3,2,4-Dithiadiphosphetane 2,4-disulfides are a class of organophosphorus, four-membered ring compounds which contain a P2S2 ring, many of these compounds are able to act as sources of the dithiophosphine ylides. The most well known example of this class of compound is Lawesson's reagent.

<span class="mw-page-title-main">Thiophenol</span> Chemical compound

Thiophenol is an organosulfur compound with the formula C6H5SH, sometimes abbreviated as PhSH. This foul-smelling colorless liquid is the simplest aromatic thiol. The chemical structures of thiophenol and its derivatives are analogous to phenols except the oxygen atom in the hydroxyl group (-OH) bonded to the aromatic ring is replaced by a sulfur atom. The prefix thio- implies a sulfur-containing compound and when used before a root word name for a compound which would normally contain an oxygen atom, in the case of 'thiol' that the alcohol oxygen atom is replaced by a sulfur atom.

<span class="mw-page-title-main">Phosphorus pentasulfide</span> Chemical compound

Phosphorus pentasulfide is the inorganic compound with the formula P2S5 or dimer P4S10. This yellow solid is the one of two phosphorus sulfides of commercial value. Samples often appear greenish-gray due to impurities. It is soluble in carbon disulfide but reacts with many other solvents such as alcohols, DMSO, and DMF.

Organophosphorus compounds are organic compounds containing phosphorus. They are used primarily in pest control as an alternative to chlorinated hydrocarbons that persist in the environment. Some organophosphorus compounds are highly effective insecticides, although some are extremely toxic to humans, including sarin and VX nerve agents.

<span class="mw-page-title-main">Methyllithium</span> Chemical compound

Methyllithium is the simplest organolithium reagent with the empirical formula CH3Li. This s-block organometallic compound adopts an oligomeric structure both in solution and in the solid state. This highly reactive compound, invariably used in solution with an ether as the solvent, is a reagent in organic synthesis as well as organometallic chemistry. Operations involving methyllithium require anhydrous conditions, because the compound is highly reactive toward water. Oxygen and carbon dioxide are also incompatible with MeLi. Methyllithium is usually not prepared, but purchased as a solution in various ethers.

<span class="mw-page-title-main">Diphenyl disulfide</span> Chemical compound

Diphenyl disulfide is the chemical compound with the formula (C6H5S)2. This colorless crystalline material is often abbreviated Ph2S2. It is one of the more commonly encountered organic disulfides in organic synthesis. Minor contamination by thiophenol is responsible for the disagreeable odour associated with this compound.

Isopropyl alcohol is a colorless, flammable organic compound with a strong alcoholic odor. As an isopropyl group linked to a hydroxyl group, it is the simplest example of a secondary alcohol, where the alcohol carbon atom is attached to two other carbon atoms. It is a structural isomer of propan-1-ol and ethyl methyl ether.

<span class="mw-page-title-main">Phosphinidene</span>

Phosphinidenes are low-valent phosphorus compounds analogous to carbenes and nitrenes, having the general structure RP. The "free" form of these compounds is conventionally described as having a singly-coordinated phosphorus atom containing only 6 electrons in its valence level. Most phosphinidenes are highly reactive and short-lived, thereby complicating empirical studies on their chemical properties. In the last few decades, several strategies have been employed to stabilize phosphinidenes, and researchers have developed a number of reagents and systems that can generate and transfer phosphinidenes as reactive intermediates in the synthesis of various organophosphorus compounds.

Sven-Olov Lawesson was a Swedish chemist known for his popularization of Lawesson's reagent within the chemical community.

<span class="mw-page-title-main">Allotropes of arsenic</span>

Arsenic in the solid state can be found as gray, black, or yellow allotropes. These various forms feature diverse structural motifs, with yellow arsenic enabling the widest range of reactivity. In particular, reaction of yellow arsenic with main group and transition metal elements results in compounds with wide-ranging structural motifs, with butterfly, sandwich and realgar-type moieties featuring most prominently.

References

  1. 1 2 Eleftheriou, Maria-Elena; Novosad, Josef; Williams, David J.; Woollins, J. Derek (1991-01-01). "Reactions of 1,3-epithionaphtho[1,8-cd][1,2λ5,6λ5]thiadiphosphinine-1,3-dithione; the preparation and X-ray structure of NpP(S)(SMe)SP(S)(OMe), the first C3P2S ring". Journal of the Chemical Society, Chemical Communications (2): 116–117. doi:10.1039/C39910000116. ISSN   0022-4936.