Nysted reagent

Last updated
Nysted reagent
Nysted Reagent.png
Names
IUPAC name
cyclo-Dibromodi-μ-methylene[μ-(tetrahydrofuran)]trizinc
Identifiers
3D model (JSmol)
ChemSpider
  • InChI=1S/C4H8O.2CH2.2BrH.3Zn/c1-2-4-5-3-1;;;;;;;/h1-4H2;2*1H2;2*1H;;;/q;;;;;;2*+1/p-2 Yes check.svgY
    Key: CCTHTLJWXPUNGT-UHFFFAOYSA-L Yes check.svgY
  • InChI=1/C4H8O.2CH2.2BrH.3Zn/c1-2-4-5-3-1;;;;;;;/h1-4H2;2*1H2;2*1H;;;/q;;;;;;2*+1/p-2/rC4H8O.C2H4Br2Zn3/c1-2-4-5-3-1;3-6-1-5-2-7-4/h1-4H2;1-2H2
    Key: CCTHTLJWXPUNGT-LIIURCMFAD
  • Br[Zn]C[Zn]C[Zn]Br.C1CCCO1
Properties
C6H12Br2OZn3
Molar mass 456.14 g/mol
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Flammable, may form explosive peroxides and reacts violently with water
Flash point −26.0 °C (−14.8 °F; 247.2 K)
Safety data sheet (SDS) External MSDS
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Yes check.svgY  verify  (what is  Yes check.svgYX mark.svgN ?)

The Nysted reagent is a reagent used in organic synthesis for the methylenation of a carbonyl group. It was discovered in 1975 by Leonard N. Nysted in Chicago, Illinois. It was originally prepared by reacting dibromomethane and activated zinc in THF. [1] A proposed mechanism for the methenylation reaction runs as follows:

A proposed mechanism for the Nysted olefination Nysted Reaction.png
A proposed mechanism for the Nysted olefination

A similar reagent is Tebbe's reagent. [2] In the Nysted olefination, the Nysted reagent reacts with TiCl4 to methylenate a carbonyl group. The biggest problem with these reagents are that the reactivity has not been well documented. It is believed that the TiCl4 acts as a mediator in the reaction. Nysted reagent can methylenate different carbonyl groups in the presence of different mediators. For example, in the presence of BF3•OEt2, the reagent will methylenate aldehydes. On the other hand, in the presence of TiCl4, TiCl3 or TiCl2 and BF3•OEt2, the reagent can methylenate ketones. Most commonly, it is used to methylenate ketones because of their general difficulty to methylenate due to crowding around the carbonyl group. The Nysted reagent is able to overcome the additional steric hindrance found in ketones, and more easily methylenate the carbonyl group. In contrast to the Wittig reaction the neutral reaction conditions of the Nysted reagent make it a useful alternative for the methylenation of easily enolizable ketones.[ citation needed ]

There is little research on Nysted reagent because of the hazards and high reactivity and the difficulty of keeping the reagent stable while it is in use. More specifically, it can form explosive peroxides when exposed to air and is extremely flammable. Also, it reacts violently with water. These make this reagent very dangerous to work with. [3] [4] [5] [6] [7]

See also

Related Research Articles

<span class="mw-page-title-main">Enamine</span> Class of chemical compounds

An enamine is an unsaturated compound derived by the condensation of an aldehyde or ketone with a secondary amine. Enamines are versatile intermediates.

<span class="mw-page-title-main">Organolithium reagent</span> Chemical compounds containing C–Li bonds

In organometallic chemistry, organolithium reagents are chemical compounds that contain carbon–lithium (C–Li) bonds. These reagents are important in organic synthesis, and are frequently used to transfer the organic group or the lithium atom to the substrates in synthetic steps, through nucleophilic addition or simple deprotonation. Organolithium reagents are used in industry as an initiator for anionic polymerization, which leads to the production of various elastomers. They have also been applied in asymmetric synthesis in the pharmaceutical industry. Due to the large difference in electronegativity between the carbon atom and the lithium atom, the C−Li bond is highly ionic. Owing to the polar nature of the C−Li bond, organolithium reagents are good nucleophiles and strong bases. For laboratory organic synthesis, many organolithium reagents are commercially available in solution form. These reagents are highly reactive, and are sometimes pyrophoric.

The Wittig reaction or Wittig olefination is a chemical reaction of an aldehyde or ketone with a triphenyl phosphonium ylide called a Wittig reagent. Wittig reactions are most commonly used to convert aldehydes and ketones to alkenes. Most often, the Wittig reaction is used to introduce a methylene group using methylenetriphenylphosphorane (Ph3P=CH2). Using this reagent, even a sterically hindered ketone such as camphor can be converted to its methylene derivative.

The Reformatsky reaction is an organic reaction which condenses aldehydes or ketones with α-halo esters using metallic zinc to form β-hydroxy-esters:

<span class="mw-page-title-main">McMurry reaction</span>

The McMurry reaction is an organic reaction in which two ketone or aldehyde groups are coupled to form an alkene using a titanium chloride compound such as titanium(III) chloride and a reducing agent. The reaction is named after its co-discoverer, John E. McMurry. The McMurry reaction originally involved the use of a mixture TiCl3 and LiAlH4, which produces the active reagents. Related species have been developed involving the combination of TiCl3 or TiCl4 with various other reducing agents, including potassium, zinc, and magnesium. This reaction is related to the Pinacol coupling reaction which also proceeds by reductive coupling of carbonyl compounds.

<span class="mw-page-title-main">Nucleophilic conjugate addition</span> Organic reaction

Nucleophilic conjugate addition is a type of organic reaction. Ordinary nucleophilic additions or 1,2-nucleophilic additions deal mostly with additions to carbonyl compounds. Simple alkene compounds do not show 1,2 reactivity due to lack of polarity, unless the alkene is activated with special substituents. With α,β-unsaturated carbonyl compounds such as cyclohexenone it can be deduced from resonance structures that the β position is an electrophilic site which can react with a nucleophile. The negative charge in these structures is stored as an alkoxide anion. Such a nucleophilic addition is called a nucleophilic conjugate addition or 1,4-nucleophilic addition. The most important active alkenes are the aforementioned conjugated carbonyls and acrylonitriles.

<span class="mw-page-title-main">Alkylimino-de-oxo-bisubstitution</span> Organic reaction of carbonyl compounds with amines to imines

In organic chemistry, alkylimino-de-oxo-bisubstitution is the organic reaction of carbonyl compounds with amines to imines. The reaction name is based on the IUPAC Nomenclature for Transformations. The reaction is acid catalyzed and the reaction type is nucleophilic addition of the amine to the carbonyl compound followed by transfer of a proton from nitrogen to oxygen to a stable hemiaminal or carbinolamine. With primary amines water is lost in an elimination reaction to an imine. With aryl amines especially stable Schiff bases are formed.

<span class="mw-page-title-main">Peterson olefination</span> Chemical reaction

The Peterson olefination is the chemical reaction of α-silyl carbanions with ketones to form a β-hydroxysilane (2) which eliminates to form alkenes (3).

The Weinreb ketone synthesis or Weinreb–Nahm ketone synthesis is a chemical reaction used in organic chemistry to make carbon–carbon bonds. It was discovered in 1981 by Steven M. Weinreb and Steven Nahm as a method to synthesize ketones. The original reaction involved two subsequent nucleophilic acyl substitutions: the conversion of an acid chloride with N,O-Dimethylhydroxylamine, to form a Weinreb–Nahm amide, and subsequent treatment of this species with an organometallic reagent such as a Grignard reagent or organolithium reagent. Nahm and Weinreb also reported the synthesis of aldehydes by reduction of the amide with an excess of lithium aluminum hydride.

In organic chemistry, umpolung or polarity inversion is the chemical modification of a functional group with the aim of the reversal of polarity of that group. This modification allows secondary reactions of this functional group that would otherwise not be possible. The concept was introduced by D. Seebach and E.J. Corey. Polarity analysis during retrosynthetic analysis tells a chemist when umpolung tactics are required to synthesize a target molecule.

<span class="mw-page-title-main">Tebbe's reagent</span> Chemical compound

Tebbe's reagent is the organometallic compound with the formula (C5H5)2TiCH2ClAl(CH3)2. It is used in the methylidenation of carbonyl compounds, that is it converts organic compounds containing the R2C=O group into the related R2C=CH2 derivative. It is a red solid that is pyrophoric in the air, and thus is typically handled with air-free techniques. It was originally synthesized by Fred Tebbe at DuPont Central Research.

<span class="mw-page-title-main">Petasis reagent</span> Chemical compound

The Petasis reagent, named after Nicos A. Petasis, is an organotitanium compound with the formula Cp2Ti(CH3)2. It is an orange-colored solid.

<span class="mw-page-title-main">Grignard reagent</span> Organometallic compounds used in organic synthesis

Grignard reagents or Grignard compounds are chemical compounds with the general formula R−Mg−X, where X is a halogen and R is an organic group, normally an alkyl or aryl. Two typical examples are methylmagnesium chloride Cl−Mg−CH3 and phenylmagnesium bromide (C6H5)−Mg−Br. They are a subclass of the organomagnesium compounds.

<span class="mw-page-title-main">Organozinc chemistry</span>

Organozinc chemistry is the study of the physical properties, synthesis, and reactions of organozinc compounds, which are organometallic compounds that contain carbon (C) to zinc (Zn) chemical bonds.

<span class="mw-page-title-main">Stork enamine alkylation</span> Reaction sequence in organic chemistry

The Stork enamine alkylation involves the addition of an enamine to a Michael acceptor or another electrophilic alkylation reagent to give an alkylated iminium product, which is hydrolyzed by dilute aqueous acid to give the alkylated ketone or aldehyde. Since enamines are generally produced from ketones or aldehydes, this overall process constitutes a selective monoalkylation of a ketone or aldehyde, a process that may be difficult to achieve directly.

<span class="mw-page-title-main">Organotitanium chemistry</span>

Organotitanium chemistry is the science of organotitanium compounds describing their physical properties, synthesis, and reactions. Organotitanium compounds in organometallic chemistry contain carbon-titanium chemical bonds. They are reagents in organic chemistry and are involved in major industrial processes.

<span class="mw-page-title-main">Takai olefination</span>

Takai olefination in organic chemistry describes the organic reaction of an aldehyde with a diorganochromium compound to form an alkene. It is a name reaction, named for Kazuhiko Takai, who first reported it in 1986. In the original reaction, the organochromium species is generated from iodoform or bromoform and an excess of chromium(II) chloride and the product is a vinyl halide. One main advantage of this reaction is the E-configuration of the double bond that is formed. According to the original report, existing alternatives such as the Wittig reaction only gave mixtures.

Zinc–copper couple is an alloy of zinc and copper that is employed as a reagent in organic synthesis. The “couple” was popularized after the report by Simmons and Smith, published in 1959, on its application as an activated source of zinc required for formation of an organozinc reagent in the Simmons–Smith cyclopropanation of alkenes. The couple has been widely applied as a reagent in other reactions requiring activated zinc metal. Zinc–copper couple does not refer to a rigorously defined chemical structure or alloy composition. The couple may contain varying proportions of copper and zinc; the zinc content is typically greater than 90%, although an alloy containing similar proportions of zinc and copper is used in some cases. The couple is frequently prepared as a darkly-colored powder and is slurried in an ethereal solvent prior to being used in slight excess relative to the substrate. Activation of zinc by copper is essential to the couple’s utility, but the origin of this effect is poorly documented. It is speculated that copper enhances reactivity of zinc at the surface of the alloy.

In organic chemistry, methylenation is a chemical reaction that inserts a methylene group into a chemical compound:

In organic chemistry, the Lombardo methylenation is a name reaction that allows for the methylenation of carbonyl compounds with the use of Lombardo's reagent, which is a mix of zinc, dibromomethane, and titanium tetrachloride.

References

  1. Nysted, L.N. US Patent, 1975, 3 865 848. see Chem. Abstr., 1875, 83, 10406q.
  2. "Nysted Reagent." Comprehensive Organic Name Reactions and Reagents. 2010; John Wiley and Sons, Inc.
  3. "Nysted Reagent. MSDS No.381985". Sigma-Aldrich. April 3, 2009.
  4. Aïssa, Christophe; Riveiros, Ricardo; Ragot, Jacques; Fürstner, Alois (December 2003). "Total Syntheses of Amphidinolide T1, T3, T4, and T5". Journal of the American Chemical Society. 125 (50): 15512–15520. doi:10.1021/ja038216z. PMID   14664598.
  5. Paquette, Leo A.; Hartung, Ryan E.; Hofferberth, John E.; Vilotijevic, Ivan; Yang, Jiong (April 2004). "Synthesis of Stereoisomeric Medium-Ring α,α'-Dihydroxy Cycloalkanones". The Journal of Organic Chemistry. 69 (7): 2454–2460. doi:10.1021/jo0358675. PMID   15049645.
  6. Clark, J. Stephen; Fessard, Thomas C.; Wilson, Claire (May 2004). "A Concise and Stereoselective Synthesis of the A-Ring Fragment of the Gambieric Acids". Organic Letters. 6 (11): 1773–1776. doi:10.1021/ol049483s. PMID   15151411.
  7. Crich, David; Banerjee, Abhisek (June 2006). "Stereocontrolled Synthesis of the d - and l - glycero -β- d - manno -Heptopyranosides and Their 6-Deoxy Analogues. Synthesis of Methyl α- l - Rhamno -pyranosyl-(1→3)- d - glycero -β- d - manno -heptopyranosyl- (1→3)-6-deoxy- glycero -β- d - manno -heptopyranosyl-(1→4)-α- l - rhamno -pyranoside, a Tetrasaccharide Subunit of the Lipopolysaccharide from Plesimonas shigelloides". Journal of the American Chemical Society. 128 (24): 8078–8086. doi:10.1021/ja061594u. PMC   2617734 . PMID   16771524.