Leyland Motors Limited was a British vehicle manufacturer of lorries, buses and trolleybuses. The company diversified into car manufacturing with its acquisitions of Triumph and Rover in 1960 and 1967, respectively. It gave its name to the British Leyland Motor Corporation, formed when it merged with British Motor Holdings in 1968, to become British Leyland after being nationalised. British Leyland later changed its name to simply BL, then in 1986 to Rover Group.
The MCW Metrobus is a two and three-axle double-decker bus manufactured by Metro Cammell Weymann (MCW) between 1977 and 1989, with over 4,000 built. The original MkI was superseded by the MkII which had a symmetrical windscreen with an arched top in 1981, although production of the original MkI continued for the Greater Manchester Passenger Transport Executive and London Regional Transport until 1983 and 1985 respectively. The Metrobus was conceived as an integral product manufactured completely by MCW, but Alexander and Northern Counties also bodied some examples.
The Scania N112 was a transversely-engined step-entrance single-decker bus, double-decker bus and articulated bus chassis manufactured by Scania between 1978 and 1987.
The Scania Metropolitan was the first double decker bus model built jointly by MCW and Scania. It was built between 1973 and 1978.
Metro Cammell Weymann Ltd. (MCW), Elmdon, Birmingham, was once a major contributor in transportation manufacturing in the UK and Europe. It was established in 1932 by Metro-Cammell's bus bodybuilding division and Weymann Motor Bodies to produce bus bodies.
Switch Mobility is an English bus manufacturer based in Sherburn-in-Elmet, North Yorkshire. It is a subsidiary of Indian company Ashok Leyland. The company is responsible for the EV operations of the group with Ashok Leyland focusing on its core business of diesel-powered vehicles as well as work on alternative fuels like compressed natural gas (CNG), liquefied natural gas (LNG) and hydrogen.
The Optare Spectra was a double-decker bus body built on the DAF DB250 chassis between 1991 and 2006.
The Optare Excel was a low-floor full-size single-decker bus manufactured by Optare. Manufactured as an integral bus, the Excel was launched in 1995 as one of the first low floor single-deck vehicles, replacing the step-entrance Optare Sigma. The styling of the body was in keeping with existing Optare products. At the front, a simple flat panel with the Optare name was set between two pairs of twin headlamps, below a very large front windscreen. Approximately 600 were built.
The Optare MetroRider was a midibus manufactured by Optare between 1989 and 2000.
The Optare StarRider was a minibus and minicoach body manufactured by Optare between 1987 and 1994. It was fitted to the Mercedes-Benz 811D chassis, with its body made from a steel frame with aluminium alloy and GPR exterior panels.
Charles H Roe was a Yorkshire coachbuilding company. It was for most of its life based at Crossgates Carriage Works, in Leeds.
The Optare Sigma was a step-entrance single-deck bus body manufactured by Optare between 1994 and 1996 on the Dennis Lance chassis. The body was constructed from Alusuisse aluminium alloy with fiberglass front and rear panels. It was the single-deck version of the Optare Spectra.
The Optare Delta was a single-decker bus body manufactured by Optare on the DAF SB220 chassis. They were built in a factory in Leeds, England. They are known for their distinctive sloping front window. A common feature about the bus that it has a distinctive one-piece windscreen with a sloped windowline and a separately mounted destination display.
The Optare Vecta was a step-entrance single-deck bus body manufactured by Optare between 1991 and 1997 on the MAN 11.180 and 11.190 chassis.
The Dennis Domino was a step-entrance midibus chassis manufactured by Dennis in Guildford, England in 1984 and 1985. It was in essence, a scaled down single-decker version of the Dennis Dominator. Developed for intensive urban work, the Domino was fitted with Perkins T6.354.4 turbocharged engine, Maxwell automatic transmission, front radiator, full air suspension and power steering. It can be regarded as a predecessor of the successful Dennis Dart.
The Northern Counties Palatine was a step-entrance 2-axle and 3-axle double-decker bus body built by Northern Counties from 1988 to 1999 in Wigan, England.
The Leyland Panther was a rear-engined single-decker bus chassis manufactured by Leyland between the years 1964 and 1972. A version with a smaller engine was released as the Leyland Panther Cub.
The MCV Evolution is a low floor and low entry single-decker bus body built by Manufacturing Commercial Vehicles. It was unveiled in 2003 as the successor to the MCV Stirling. The MCV Evolution 2 was launched, initially on Mercedes-Benz chassis in 2011.
Multi-stop trucks are a type of light-duty and medium-duty truck created for local deliveries to residences and businesses. They are designed to be driven either sitting down or standing up, and often provide easy access between the driver and goods, hence the name "walk-in delivery" van. They are taller than full-size vans, such as the Ford Econoline, Dodge A-Series/B-Series/Ram Vans, and Chevrolet G-Series vans, but can have wheelbases that are shorter than these models or longer.
The East Lancs OmniDekka is a double-decker bus built for sale in the UK market, introduced by East Lancashire Coachbuilders in 2003. Originally built on Scania N94UD chassis at Euro 3, and later Scania N230UD and N270UD at Euro 4 and Euro 5, the bodywork consists of a modified East Lancs Myllennium double decker, but with the standard front end cowl and windscreen replaced with that of Scania's own integral OmniCity. Through takeovers of East Lancs, production of the OmniDekka was latterly carried out by the Darwen Group and finally Optare before ceasing in 2011.
