J-4 Javelin | |
---|---|
Role | Glider |
National origin | United States |
Manufacturer | Peterson Sailplane Corporation |
Designer | Max A. Peterson |
First flight | 1969 |
Introduction | 1973 |
Status | No longer in production |
Number built | 8 |
The Peterson J-4 Javelin is an American, single seat, mid-wing glider that was designed by Max A. Peterson in the late 1960s and produced by the Peterson Sailplane Corporation in small numbers. The glider was type certified and put into production in 1973. [1] [2] [3]
Peterson designed the J-4 based on lessons he learned with his earlier Peterson Medena design. The J-4 is a single seater, but can carry a child in the small seating area behind the pilot. [1] [2]
The J-4's fuselage is made from steel tube with the lower part covered in a fiberglass shell and the upper part sheet aluminium. The wing is built around a chem-milled tubular spar and is assembled predominantly with pop rivets. The wing has no ailerons and instead roll control is via upper surface spoilerons that eliminate virtually all adverse yaw. Spoilers are also provided for glide-path control. The landing gear is a monowheel. [1] [2]
First flown in 1969, the J-4 was Federal Aviation Administration type certified on 6 February 1973. A pilot production run of eight examples was completed, but production was not continued. Poly Industries of Ontario, California produced aircraft under licensing agreement from Peterson Sailplane Corporation, who held the type certificate. [1] [2] [3]
In 1983, six of the original eight built were reportedly still flying and there were still six registered in April 2011. [2] [4]
Data from Sailplane Directory, Soaring and FAA type certificate [1] [2] [3]
General characteristics
Performance
The Schweizer SGS 1-23 is a United States Open and Standard Class, single-seat, mid-wing glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGU 1-19 and Schweizer SGU 1-20 are a family of United States single-seat, high-wing, strut-braced, utility gliders built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGU 2-22 is an American two-seat, high-wing, strut-braced, training glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-34 is a United States Standard Class, single-seat, high-wing glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-35 is a United States 15 Meter Class, single-seat, mid-wing glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-36 Sprite is a United States, single-seat, mid-wing glider built by Schweizer Aircraft of Elmira, New York.
The Ryson ST-100 Cloudster is a tandem two-seat, low-wing, conventional landing gear motor glider that was designed by T. Claude Ryan first flown in 1976 and certified in 1983. The aircraft was intended to be used as both a motor glider and a light aircraft and was type certified in both categories.
The Laister LP-46 and LP-49 are a family of American high-wing, single-seat, gliders that were designed by Jack Laister and produced by Laister Sailplanes both as kit aircraft and as certified complete aircraft.
The Laister LP-15 Nugget is an American single-seat, high-wing glider designed by Jack and Bill Laister for the FAI Standard Class.. It first flew in 1971.
The Briegleb BG-7 is an American strut-braced high-wing, single seat glider that was designed by William G. Briegleb and produced by the Sailplane Corporation of America as a completed aircraft and also as a kit.
The Miller Tern is an American single-seat, high wing glider that was designed by William Terrance Miller and offered as plans for amateur construction.
The Luenger Beta 1 was an American high-wing, single-seat, T-tailed FAI Open Class glider designed by Hans Luenger and Spud Kohler.
The Oldershaw O-3 is an American high-wing, single seat, V-tailed glider that was designed by Vernon Oldershaw. Two examples were constructed as gliders and then both were later converted to motor gliders.
The FFA Diamant is a family of Swiss high-wing, T-tailed, single-seat, FAI Standard Class and FAI Open Class gliders that was designed by engineering students under supervision of Professor Rauscher at the ETH Zurich and manufactured by Flug- und Fahrzeugwerke Altenrhein AG (FFA) of Altenrhein, Switzerland.
The Prue Super Standard is an American, high-wing, single-seat, FAI Standard Class glider that was designed by Irving Prue in 1962 as a development of the Prue Standard.
The Midwest MU-1 was an American single-seat, high-wing, strut-braced utility glider that was designed by Arthur B. Schultz in the 1930s.
The Glasflügel 205 Club Libelle is a high wing, T-tailed, single seat glider that was designed and produced in West Germany by Glasflügel for club and rental use.
The Fibera KK-1e Utu is a Finnish mid-wing, T-tailed, single-seat, FAI Standard Class glider that was designed by Ahto Anttila and produced by Fibera in the 1960s.
The N.V. Vliegtuigbouw 013 Sagitta is a Dutch mid-wing, single-seat Standard Class glider designed by Piet Alsema and produced by N.V. Vliegtuigbouw.
The Scheibe Zugvogel is a West German, high-wing, single-seat, FAI Open Class glider that was produced by Scheibe Flugzeugbau. The first version was designed by Rudolph Kaiser and subsequent versions by Egon Scheibe.