Piaggio P.119

Last updated
Piaggio P.119
Piaggio P.119 fighter prototype.jpg
RoleFighter
Manufacturer Piaggio
DesignerGiovanni Casiraghi
First flight19 December 1942
StatusPrototype only
Number built1

The Piaggio P.119 was an Italian experimental fighter of World War II. It had a relatively novel layout, with a "buried" radial engine mounted mid-fuselage. Only a single prototype was built before the Armistice between Italy and the allied armed forces, which ended the project.

Contents

Development

Among the many Italian aircraft manufacturers, during World War II, the majority (such as Savoia-Marchetti and Caproni) designed and built mixed-construction aircraft, or, in the case of CANT, completely made of wood. While Fiat and Macchi built more advanced aircraft, they still tended to have conventional, often obsolete structures, even if of all-metal construction. Only Reggiane and Piaggio mastered advanced, all-metal structures. Of them, Piaggio tended to explore the innovative concepts. The Piaggio P.119 was one of the best examples of these projects. The '5' series fighters are well known, especially the Fiat G.55 and the Macchi C.205, but there were two other fighters on the same level, the Caproni Vizzola F.6 and the Piaggio P.119, neither of which entered production.

The P.119 was designed (in 1939), to minimise drag by fitting the engine in mid-fuselage in a similar layout to the P-39 Airacobra. It was hoped to improve maneuverability by positioning the engine near the aircraft's centre of gravity, which would also allow a heavy nose-mounted armament. [1] In 1940, Piaggio still had to solve three major issues: contra-rotating propellers, power transmission, and engine cooling.

Giovanni Casiraghi, chief designer of Piaggio, tried to solve the first issue with the P.118 fighter, but without success. It was intended to be powered by two Piaggio P.XI RC 40 engines, each connected to a propeller, but it was not built. The P.119 was built instead and first flew at the end of 1942. Three different configurations were studied before one was chosen.

Design

The P.119 was a cantilever monoplane, constructed completely of metal, with a conventional wide undercarriage. It had a forward-mounted cockpit, with the weapons mounted just behind the three-bladed propeller. It had advanced construction for the time, with many removable panels for internal inspection. The number of components were reduced to a minimum, and also standardized, to make construction as easy as possible. No other Italian aircraft was so advanced in these details.[ citation needed ]

The P.119 was powered by a 1,119 kW (1,500 hp) Piaggio P.XV RC 45 radial engine located behind the cockpit. Air intakes for cooling were fitted under the nose. The propeller was a 3.3 m (10 ft 10in) diameter Piaggio P.1002 driven by a shaft running under the cockpit. A further development was planned with a Piaggio P.XV RC 50, giving 1,230 kW (1,650 hp) at takeoff and 1,099 kW (1,475 hp) at 5,000 m (16,400 ft) altitude, with a planned maximum speed of 630 km/h (390 mph) maximum speed but never implemented.

The aircraft had a 330 L (90 US gal) fuel tank in each wing, and a 340 L (90 US gal) tank in the fuselage, giving a total of 1,000 L (260 US gal), a 2½ times greater capacity than that of a Bf 109 or a MC.205.[ citation needed ]

Overall weight of the aircraft was quite high, but the wing was wide, with a 13 m (43 ft) wingspan. The surface area was almost 28 m2 (300 ft2), giving a wing loading of around 150 kg/m2. The wing was built on a single spar which also supported the engine, and a semi-spar/semi-monocoque skin.

The armament was concentrated in the nose; a 20 mm Breda cannon with 110 rounds and four 12.7 mm (0.5 in) Breda heavy machine guns with 2,000 rounds. The Breda gun was more powerful than the German 20 mm MG 151, but had a lower rate of fire. There was also provision to install another four 7.7 mm (0.303 in) Breda machine guns in the wings with 1,200 rounds in total. An anti-tank version was proposed with a Breda 37 mm (1.46 in) gun, but not built.

Operational history

The machine was flight-tested, but it was found that firing all the weapons produced excessive vibration. A landing accident slightly damaged one wing on 2 August 1943. One month later, the armistice with the Allies brought an end to the project.

All in all, the P.119 was an interesting and somewhat mysterious aircraft, for many years totally unknown to the public. It was not sent to Guidonia for official evaluation.

Performance could have been very good. The engine and the weapons were built under foreign license, but they could have been called 'authentic' in respect to the German DB 605 engine and 20 mm MG 151 guns mounted in the '5' series fighters. Performance was good enough to compete with other Italian fighters and endurance was much better. However, the aircraft was not ready until eight months after the other '5' fighters, and this was catastrophic for the program. The aircraft was not rated officially by the Regia Aeronautica, and MM.496 was the only one built. Apart from this, the range, endurance and overall visibility were superior, and the performance and weaponry were not so different.

Specifications (P.119)

Data fromThe Complete Book of Fighters. [2]

General characteristics

Performance

Armament

See also

Aircraft of comparable role, configuration, and era

Related lists

Related Research Articles

<span class="mw-page-title-main">Savoia-Marchetti SM.81 Pipistrello</span> Type of aircraft

The Savoia-Marchetti SM.81 Pipistrello was the first three-engine bomber/transport aircraft serving in the Italian Regia Aeronautica. When it appeared in 1935, it represented a real step ahead in Italian military aviation: it was fast, well armed and had a long range. It proved effective during the war with Ethiopia and the Spanish Civil War. Despite being too slow to remain competitive as a bomber in the later years of World War II, it was one of the most flexible, reliable and important aircraft of the Regia Aeronautica from 1935 to 1944, and adapted to second-line duties in a wide range of tasks.

<span class="mw-page-title-main">Piaggio P.108</span> Italian bomber

The Piaggio P.108 Bombardiere was an Italian four-engine heavy bomber that saw service with the Regia Aeronautica during World War II. The prototype first flew on 24 November 1939 and it entered service in 1941. It was one of a handful of Italian combat aircraft that could match the best manufactured by the Allies. Four versions of the P.108 were designed, but only one, the P.108B bomber, was produced in any quantity before the armistice. The other variants included the P.108A anti-ship aircraft with a 102 mm (4 in) gun, the P.108C, an airliner with an extended wingspan and re-modelled fuselage capable of carrying 32 passengers, and the P.108T transport version designed specifically for military use. Only one P.108A and 24 P.108Bs were built. The combined total number of all versions was at least 39, almost certainly more than 44. Most of the P.108Cs were subsequently modified for use as military transport aircraft and could accommodate up to sixty passengers. Nine P.108 Ts were used by Luftwaffe transport units until the end of the war.

<span class="mw-page-title-main">Breda Ba.88 Lince</span> Type of aircraft

The Breda Ba.88 Lince ("Lynx") was a ground-attack aircraft used by the Italian Regia Aeronautica during World War II. Its streamlined design and retractable undercarriage were advanced for the time, and after its debut in 1937 the aircraft established several world speed records. However, when military equipment was installed on production examples, problems of instability developed and the aeroplane's general performance deteriorated. Eventually its operational career was cut short, and the remaining Ba.88 airframes were used as fixed installations on airfields to mislead enemy reconnaissance. It represented, perhaps, the most remarkable failure of any operational aircraft to see service in World War II.

<span class="mw-page-title-main">Reggiane Re.2001 Falco II</span> Type of aircraft

The Reggiane Re.2001 Falco II was an Italian fighter aircraft, serving in the Regia Aeronautica during World War II. A contemporary of the renowned Macchi C.202, the production of this type was to be limited to only 252, but it was a flexible design that proved to be able to undertake a number of roles. Thanks to its maneuverability it could dogfight with more powerful opponents like the Supermarine Spitfire. The Re.2001 became the basis of a later, more formidable fighter, the Re.2005.

<span class="mw-page-title-main">Breda Ba.64</span> Type of aircraft

The Breda Ba.64 was an Italian single-engine ground-attack aircraft used by the Regia Aeronautica during the 1930s.

<span class="mw-page-title-main">Ambrosini SAI.403</span> Type of aircraft

The Ambrosini SAI.403 Dardo ("Dart") was a light fighter aircraft built in Italy during World War II.

<span class="mw-page-title-main">CANT Z.1018 Leone</span> Italian medium bomber

The CRDA CANT Z.1018 Leone (Lion) was an Italian medium bomber of the 1940s.

<span class="mw-page-title-main">Savoia-Marchetti SM.89</span> Type of aircraft

The Savoia-Marchetti SM.89 was an attack aircraft designed by Alessandro Marchetti and built by Savoia-Marchetti. Only one example was built, the prototype (MM.543).

<span class="mw-page-title-main">Savoia-Marchetti SM.91</span> Type of aircraft

The Savoia-Marchetti SM.91 was a two-seat, twin-engined, Italian heavy fighter prototype, designed to compete in a 1942 revision to a long-range fighter-bomber contract offered by the Regia Aeronautica to Italian aircraft companies in 1938. The original 1938 specification yielded the Savoia-Marchetti SM.88, which the SM.91 was largely based on.

<span class="mw-page-title-main">Savoia-Marchetti SM.78</span> Italian warplane

The Savoia-Marchetti SM.78 was an Italian bomber/reconnaissance biplane flying boat of the early 1930s.

<span class="mw-page-title-main">Breda Ba.201</span> Italian dive bomber prototype

The Breda Ba.201 was an Italian dive bomber designed during World War II, that never entered production.

<span class="mw-page-title-main">IMAM Ro.41</span> 1934 Italian fighter and trainer aircraft

The IMAM Ro.41 was an Italian light biplane fighter aircraft, serving in the Regia Aeronautica in the 1930s-1940s, mainly as a trainer.

The Piaggio P.32 was an Italian medium bomber of the late 1930s, produced by Piaggio, and designed by Giovanni Pegna. It was a modern design for its time, but was a failure due to lack of powerplants commensurate with its high wing loading.

<span class="mw-page-title-main">Caproni Ca.311</span> Type of aircraft

The Caproni Ca.311 was a light bomber-reconnaissance aircraft produced in Italy prior to and during World War II.

<span class="mw-page-title-main">Caproni Ca.355</span> Italian WWII dive bomber

The Caproni Ca.355 Tuffo was a low-wing single-engine dive bomber, designed and built by the Italian Caproni company in 1941, which never proceeded beyond a single prototype. Derived from Ca.335 Mistral, the Ca.355 was proposed to equip the Regia Aeronautica, but it was found to offer little advantage over the German Junkers Ju 87 "Stuka" and the project was abandoned.

<span class="mw-page-title-main">Caproni CH.1</span> Italian biplane fighter prototype

The Caproni CH.1 was a single-seat biplane fighter, a single example of which was produced as a prototype in Italy in 1935.

<span class="mw-page-title-main">Caproni Vizzola F.6</span> Type of aircraft

The Caproni Vizzola F.6 was a World War II-era Italian fighter aircraft built by Caproni. It was a single-seat, low-wing cantilever monoplane with retractable landing gear. Only two prototypes were built, one designated F.6M and the other designated F.6Z.

<span class="mw-page-title-main">Caproni Ca.331</span> Italian light bomber/night fighter prototype

The Caproni Ca.331 Raffica was an Italian aircraft built by Caproni in the early 1940s as a tactical reconnaissance aircraft/light bomber and also as a night fighter.

<span class="mw-page-title-main">Piaggio P.16</span> Type of aircraft

The Piaggio P.16 was an Italian heavy bomber designed and built by Piaggio for the Regia Aeronautica.

<span class="mw-page-title-main">CANSA FC.20</span> Type of aircraft

The CANSA FC.20 was a twin engine reconnaissance bomber/ground attack monoplane designed and built in Italy in 1941. Several versions with different armament and engines were flown but only the FC.20bis ground attack variant reached squadron service, in very small numbers, before the 1943 armistice.

References

  1. 1 2 Green, William (1961). Warplanes of the Second World War, Fighters Volume 2. London: Macdonald. pp. 170–171.
  2. Green, W; Swanborough, G (1994). The Complete Book of Fighters. Smithmark. p. 471. ISBN   0-8317-3939-8.