Piaggio P.2 | |
---|---|
Role | Fighter |
Manufacturer | Pegna-Bonmartini and Piaggio |
Designer | Ing Giovanni Pegna |
First flight | 1923 |
Introduction | 1924 |
Primary user | Regia Aeronautica |
Number built | 2 |
The Piaggio P.2 was an Italian fighter prototype of advanced design built by Piaggio in 1923.
In 1923, the Pegna-Bonmartini workshops at Sestri Ponente in Genoa, Italy, were constructing a fighter aircraft prototype designed by Ing Giovanni Pegna around the smallest airframe that could accommodate the 224-kilowatt (300-horsepower) Hispano-Suiza HS 42 eight-cylinder water-cooled engine. After the Piaggio company purchased Pegna-Bonmartini that year, construction of the prototype continued and resulted later in 1923 in the completion of the Piaggio P.2. [1]
The P.2 was an aerodynamically clean, single-seat, low-wing, cantilever monoplane of very advanced design for the time with either a monocoque [2] or semi-monocoque fuselage and fixed landing gear. It was built of wood, with plywood skin and fabric-covered control surfaces, and was armed with two machine guns—sources differ on whether the machine guns were of 7.62-millimeter (0.3-inch) or 12.7-millimeter (0.5-inch) [3] caliber—synchronized to fire through the propeller. [4] It had two radiators, one mounted on each side of the fuselage, forward of the open cockpit.
Piaggio built two P.2 prototypes and entered the P.2 in the 1923 Italian official fighter contest. The P.2 was probably ahead of its time, however; the Italian Air Ministry distrusted monoplanes at the time and the P.2's performance did not meet the level that Pegna had predicted, and for these reasons no production order followed. However, the Regia Aeronautica (Italian Royal Air Force) purchased one of the prototypes for evaluation, taking delivery of it on 23 March 1924. [5]
General characteristics
Performance
Armament
Notes:
The Nieuport-Delage NiD 52 was a French fighter aircraft of the 1920s. A single-engined sesquiplane, it served with the Spanish Air Force, being operated by both sides of the Spanish Civil War.
The Dewoitine D.1 was a French single-seat fighter aircraft of the 1920s, built by the French industrial company Dewoitine.
The Piaggio P.119 was an Italian experimental fighter of World War II. It had a relatively novel layout, with a "buried" radial engine mounted mid-fuselage. Only a single prototype was built before the Armistice between Italy and the allied armed forces, which ended the project.
The SIAI S.52 was an Italian fighter prototype of 1924.
The Caproni CH.1 was a single-seat biplane fighter, a single example of which was produced as a prototype in Italy in 1935.
The Caproni Vizzola F.4 was an Italian fighter aircraft prototype that was designed in 1937 and built from 1939. It was a single-seat, low-wing cantilever monoplane with retractable landing gear.
The Caproni Vizzola F.6 was a World War II-era Italian fighter aircraft built by Caproni. It was a single-seat, low-wing cantilever monoplane with retractable landing gear. Only two prototypes were built, one designated F.6M and the other designated F.6Z.
The Caproni Ca.331 Raffica was an Italian aircraft built by Caproni in the early 1940s as a tactical reconnaissance aircraft/light bomber and also as a night fighter.
The Piaggio P.50 was an Italian prototype heavy bomber designed and built by Piaggio for the Regia Aeronautica.
The Gabardini G.8 was an Italian single-seat aircraft produced in both fighter and trainer versions by Gabardini in 1923.
The Gabardini G.9 was an Italian single-seat biplane fighter prototype produced by Gabardini in 1923.
The Marchetti MVT, later renamed SIAI S.50, was an Italian fighter of 1919 and the early 1920s.
The SIAI S.58 or Savoia-Marchetti S.M.58 was an Italian flying boat fighter prototype of the 1920s designed and manufactured by SIAI.
The SIAI S.67 or Savoia Marchetti SM.67 was an Italian flying boat fighter of the early 1930s designed and manufactured by SIAI.
The Macchi M.26 was an Italian flying boat fighter prototype of 1924 designed and manufactured by Macchi.
The Tebaldi-Zari was an Italian fighter prototype of 1919. The Breda company later acquired the rights to it.
The SNCAO 200, sometimes written CAO.200, was a prototype French single seat fighter aircraft of the 1930s. It was a single engined monoplane intended to compete with the Dewoitine D.520, but was unsuccessful, only a single example being built.
The ANF Les Mureaux 170 was a prototype French fighter aircraft of the 1930s. It was a single-engined, single-seat parasol monoplane, but only two were built, the type being rejected for service by the French Air Force.
The Loire-Nieuport 161 was a single-seat, single-engine, all-metal, low-wing monoplane fighter designed and built in France in 1935 to compete for a government contract. Accidents delayed its development and only three prototypes were completed.
The SNCAC NC-600 was a prototype French twin-engined long-range fighter aircraft, developed by SNCAC from the earlier Hanriot H.220 fighter. The type never entered service, with development being ended by the French surrender in June 1940.