Piaggio P.23R | |
---|---|
Role | Commercial transport aircraft prototype |
National origin | Italy |
Manufacturer | Piaggio |
First flight | 1936 |
Number built | 1 |
The Piaggio P.23R, also known as the Piaggio P.123 for propaganda purposes, was an Italian commercial transport aircraft prototype designed and built by Piaggio.
Piaggio designed the P.23R specifically to break speed records for commercial transport aircraft. It was a three-engine low-wing cantilever monoplane with twin tail fins and rudders. The three 671-kilowatt (900-horsepower) Isotta Fraschini Asso ("Ace") XI R V-12 engines were mounted in aerodynamically clean, sleek cowlings and each drove a three-bladed propeller. The fuselage was pencil-shaped. The crew of two sat side by side in separate open cockpits, each protected by a windscreen.
The P.23R later was re-engined with three 746-kilowatt (1,001-horsepower) Piaggio P.XI RC.40 radial engines and its landing gear was modified. In addition, both cockpits were enclosed with canopies.
The P.23R first flew in 1936. On 30 December 1938, it carried a payload of 5000 kilograms (11,023 pounds) at an average speed of 404 kilometers per hour (250.8 miles per hour), setting new world records over both the 1,000-kilometer (620 mi) and 2,000-kilometer (1,200 mi) distances.
The P.23R's development was halted in 1939. During World War II, however, Allied aircraft recognition manuals erroneously identified it as a possible Regia Aeronautica (Italian Royal Air Force) bomber.
Although confusingly numbered as if it were a variant of the Piaggio P.23 commercial transport prototype of 1935, the P.23R was in fact an entirely new design.
Data fromItalian Civil and Military aircraft 1930-1945 [1]
General characteristics
Performance
The Piaggio P.XI was an Italian 14-cylinder radial aircraft engine. The P.XI was a licensed derivative of the French Gnome-Rhône Mistral Major 14K produced in Italy. Isotta Fraschini also produced a version of the 14K called the K.14.
The Savoia-Marchetti S.74 was a four-engine airliner developed by Savoia-Marchetti for Ala Littoria.
The Ambrosini SAI.3 was a two-seat Italian touring airplane first flown in 1937.
The Breda Ba.25 was an Italian two-seat biplane trainer designed and built by the Breda company. It was the most widely used Italian basic trainer of the 1930s.
The Meridionali Ro.37 Lince was a two-seater Italian reconnaissance biplane, a product of the Industrie Meccaniche Aeronautiche Meridionali (IMAM) company. It appeared in 1934 and had a composite structure of wood and metal. The aeroplane first saw operational duty in the Second Italo-Ethiopian War (1935–1936) and Spanish Civil War (1936–1939), and during the Second World War it saw duty on almost all fronts, except for Russia and the English Channel. It followed the Ro.1 as the main reconnaissance aircraft for the Italian Army.
The Caproni Ca.135 was an Italian medium bomber designed in Bergamo in Italy by Cesare Pallavicino. It flew for the first time in 1935, and entered service with the Peruvian Air Force in 1937, and with the Regia Aeronautica in January 1938.
The Savoia-Marchetti S.84 was an Italian twin-engined airliner developed in Italy, from the three-engined Savoia-Marchetti S.73; only the prototype was completed and the designation was re-used for the Savoia-Marchetti SM.84.
The Piaggio P.32 was an Italian medium bomber of the late 1930s, produced by Piaggio, and designed by Giovanni Pegna. It was a modern design for its time, but was a failure due to lack of powerplants commensurate with its high wing loading.
The Caproni Ca.161 was an aircraft built in Italy in 1936, in an attempt to set a new world altitude record. It was a conventional biplane with two-bay, staggered wings of equal span, based on Caproni's Ca.113 design. The pressure-suited pilot was accommodated in an open cockpit.
The CANT Z.509 was a three-engine Italian floatplane developed from the Z.506A for use as a mailplane.
The Macchi M.C.94 was a 1930s Italian commercial flying boat built by Macchi.
The Caproni Ca.331 Raffica was an Italian aircraft built by Caproni in the early 1940s as a tactical reconnaissance aircraft/light bomber and also as a night fighter.
The Piaggio P.16 was an Italian heavy bomber designed and built by Piaggio for the Regia Aeronautica.
The Piaggio P.23M was an Italian commercial transport aircraft prototype designed and built by Piaggio.
The Piaggio P.50 was an Italian prototype heavy bomber designed and built by Piaggio for the Regia Aeronautica.
The Piaggio P.111 was an Italian high-altitude research aircraft designed and built by Piaggio for the Regia Aeronautica.
The Breda Ba.33 was an Italian light sport aircraft designed and built by the Breda company.
The Breda Ba.82 was an Italian medium bomber prototype of the late 1930s; it was designed and built by the Breda company.
The CANT Z.504 was a prototype reconnaissance biplane flying boat made by CANT in the 1930s.
The CANT Z.505 was a prototype trimotor transport floatplane built by CANT in the 1930s.