Pictou Shipyard

Last updated
Launching of S.S. Ashby Park at the Pictou Shipyard in 1944 Ssashbypark1944.jpg
Launching of S.S. Ashby Park at the Pictou Shipyard in 1944

The Pictou Shipyard is a Canadian shipbuilding site located in Pictou County, Nova Scotia, and made famous by its use as an emergency shipbuilding facility in World War II, during which it constructed twenty-four 4,700-ton Scandinavian class freighters. [1]

Contents

It was founded at its current location in 1856, as the Pictou Iron Foundry, by William Henry Davies. [2] Through many business booms and busts, as well as several changes of ownership, it has continued to operate until today, when it is owned by Aecon Atlantic Industrial Inc. [3]

Early shipbuilding and repairs

Although the official founding by W. H. Davies did not occur until 1856, Pictou's ship registry began in 1840. [4] :12 Shipbuilding and ship repair began in Pictou in various places near the town a few years after settlement in 1773 via the Hector, with the first cargo of squared timber leaving Pictou in 1774. [4] :11 Other than the current site itself, the most significant site in the shipbuilding industry was located on Windmill Point where Captain William Lowden first settled in 1788. He eventually moved into the town of Pictou and continued his ship work. Captain Lowden is traditionally considered to be the father of shipbuilding in Pictou County, as he was made famous by his construction of the Harriet in 1798. At 600 tons she was built with room for twenty-four guns and was supposed to be the largest and finest ship built in the province at that time. He was not the first builder, however, as there is a record of a small one-mast vessel being launched in Pictou Harbour in 1788 by Thomas Copeland, and the county's first schooner named the Anne was built in 1788 at Merigomish, Nova Scotia. [4] :17–18 Shipbuilding and work continued throughout the early 1800s. Before the age of steam the types of ships built were schooners, brigs, and brigantines, barques and barquentines and full-rigged ships. [4] :20 Most notable was the yard's work on the SS Royal William on her fully steam-powered voyage across the Atlantic. [2]

A foundry in Pictou

W. H. Davies, who left the Albion Iron Foundry in 1854, completed and managed his own foundry on the Pictou waterfront in 1856. Davies's sons George and Charles carried on the foundry's operation until the late 1800s, when they sold it to Joseph Robb and Douglas Hannon. In 1906 Allan A. Ferguson bought out the interests of Robb, and the business was renamed as the Pictou Foundry and Machine Company. In 1910 Douglas Hannon died, and Ferguson became the sole owner and head of the business. [4] :33

Ferguson ownership

During Ferguson's twenty-five years of management of the foundry, it was diversified, with an expansion of machine, moulding, boiler, carpenter and pattern-work operations. This allowed for the lease of machine-shop facilities to early automobile mechanics. During 1913 the plant was equipped with electromotive power and was the first in the area to change from steam. After the outbreak of the Great War, the company participated in the war effort and machine finished thousands of shells forged in Trenton, Nova Scotia. Once the war was over and peace was enjoyed for another two decades, the primary work for the Pictou Foundry and Machine Company was both steel and wooden ship and dredge repairs. [4] :33–34

Ferguson died in 1932, and the business was then taken over by his eldest son, Robert A. Ferguson, who upon the outbreak of war was joined by his three brothers, Allan A. Ferguson Junior, Thomas Ferguson and James Ferguson. Before World War II there had not been a ship launched in Pictou since the barque Orquell in 1879. [4] :33–34 [2]

Park ships

Britain had been at war for less than a year when it was realized that Germany was destroying Britain's merchant ships faster than they could be replaced. Due to Britain's focus on the production of its own naval ships, it did not have the capacity to keep up with merchant vessel losses. This led to a British shipbuilding commission arriving in North America in October 1940 looking for help to supply the much needed transport. The commission found the help they were looking for, and the Canadian government was charged with the immediate construction of twenty-six 10,000-ton cargo ships for Britain. At the same time Canada decided to build more ships for its own benefit. It was some of these additional ships that would be built as Park ships in Pictou. A totally of twenty-four 4,700-ton Scandinavian class freighters would eventually be built, but not before major preparation and expansion measures were completed to the yard and town to accommodate the new booming business. [4] :1

When the good news hit Pictou on October 9, 1941, the Pictou shipyard consisted of a marine slip with refit and repair capability. Major changes thus had to be made, launch ways had to be built, and more space had to be created. To create more space, the landmark of Battery Hill was bulldozed to make room for the new yard. Along with the new developments, the new yard was taken over by Foundation Maritime Shipbuilding Limited. This allowed for the Ferguson brothers to retain the operations of the original marine slip and carry out repairs and refits to naval vessels. The first ship to be built was the SS Victoria Park, which was launched on October 22, 1942. Twenty-three more would follow. [4] :1

The twenty-four Park ships built in Pictou were as follows: [5]

   

After World War II

The Dartmouth III ferry was launched at Pictou in 1978. She served as a harbour ferry in halifax until 2016 and was then transferred to Toronto for service there Dartmouth III Ferry.JPG
The Dartmouth III ferry was launched at Pictou in 1978. She served as a harbour ferry in halifax until 2016 and was then transferred to Toronto for service there

With the twenty-four Park ships built and the war over, Foundation Maritime Limited closed the shipyard and the equipment was sold. Convinced that shipbuilding could be a viable industry in Pictou, the Ferguson brothers, with the support of the Nova Scotia government, took over the shipyard building and re-equipped the yard. Although the senior brother, Robert A. Ferguson, died in 1942, the remaining brothers continued the firm, incorporated it as Ferguson Industries Ltd. and gained official ownership of the entire yard. The Fergusons built 107 steel ships in the post–World War II years, which included barges, trawlers, and ferry boats. The Fergusons' ownership lasted until 1984, when the firm faced bankruptcy and entered receivership.

Related Research Articles

<span class="mw-page-title-main">Shipyard</span> Place where ships are built and repaired

A shipyard, also called a dockyard or boatyard, is a place where ships are built and repaired. These can be yachts, military vessels, cruise liners or other cargo or passenger ships. Compared to shipyards, which are sometimes more involved with original construction, dockyards are sometimes more linked with maintenance and basing activities. The terms are routinely used interchangeably, in part because the evolution of dockyards and shipyards has often caused them to change or merge roles.

<span class="mw-page-title-main">Pictou</span> Town in Nova Scotia, Canada

Pictou is a town in Pictou County, in the Canadian province of Nova Scotia. Located on the north shore of Pictou Harbour, the town is approximately 10 km north of the larger town of New Glasgow.

<span class="mw-page-title-main">River John, Nova Scotia</span> Unincorporated village and surrounding rural areas in Nova Scotia, Canada

River John is an unincorporated community in Pictou County, Nova Scotia, Canada.

<span class="mw-page-title-main">John Brown & Company</span> British marine engineering and shipbuilding firm (1851–1986)

John Brown and Company of Clydebank was a Scottish marine engineering and shipbuilding firm. It built many notable and world-famous ships including RMS Lusitania, RMS Aquitania, HMS Hood, HMS Repulse, RMS Queen Mary, RMS Queen Elizabeth and Queen Elizabeth 2.

<span class="mw-page-title-main">Ailsa Shipbuilding Company</span>

Ailsa Shipbuilding Company was a Scottish shipbuilding company based in Troon and Ayr, Ayrshire.

<span class="mw-page-title-main">Crichton-Vulcan</span>

Crichton-Vulcan is an abandoned shipyard in Turku, Finland, that once formed the cornerstone of the Finnish shipbuilding industry. The shipyard is best known for the World War II coastal defence ships and submarines it produced.

Saint John Shipbuilding was a Canadian shipbuilding company located in Saint John, New Brunswick. The shipyard was active from 1923 to 2003.

<span class="mw-page-title-main">Halifax Shipyard</span>

The Halifax Shipyard Limited is a Canadian shipbuilding company located in Halifax, Nova Scotia.

<span class="mw-page-title-main">Eatonville, Nova Scotia</span> Ghost town in Nova Scotia, Canada

Eatonville is a former lumber and shipbuilding village in Cumberland County, Nova Scotia. It includes a large tidal harbour at the mouth of the Eatonville Brook beside several dramatic sea stacks known as the "Three Sisters". It was founded in 1826 and abandoned in the 1940s. The site of the village is now part of Cape Chignecto Provincial Park.

The Pusey and Jones Corporation was a major shipbuilder and industrial-equipment manufacturer. Based in Wilmington, Delaware, it operated from 1848 to 1959.

The Delaware River Iron Ship Building and Engine Works, was a major late-19th-century American shipyard located on the Delaware River in Chester, Pennsylvania. It was founded by the industrialist John Roach and is often referred to by its parent company name of John Roach & Sons, or just known as the Roach shipyard. For the first fifteen years of its existence, the shipyard was by far the largest and most productive in the United States, building more tonnage of ships than its next two major competitors combined, in addition to being the U.S. Navy's largest contractor. The yard specialized in the production of large passenger freighters, but built every kind of vessel from warships to cargo ships, oil tankers, ferries, barges, tugs and yachts.

Park ship Class of cargo ships built in Canada during World War II

Park ships were merchant steamships constructed for Canada’s Merchant Navy during the Second World War. Park ships and Fort ships were the Canadian equivalent of the American Liberty ships. All three shared a similar design by J.L. Thompson and Sons of Sunderland, England. Fort ships had a triple expansion steam engine and a single screw propeller. Fort ships were ships transferred to the British government and the Park ships were those employed by the Canadian government, both had the similar design. Park ships were named after local and National Parks of Canada. A few Park ships were launched as "Camp ships", named after Canada military camps, but were quickly renamed after Parks. Jasper Park was the first Park ship lost to enemy attack, in the Indian Ocean after a torpedo attack from U-177 in the Indian Ocean, South of Durban, South Africa.

Avondale Park was a 2,872 GRT cargo ship which was built by Pictou Shipyard at Pictou, Nova Scotia in 1944. She was the last merchant ship to be sunk by Germany in the Second World War, on 7 May 1945, the day of German surrender. She was built as merchant steamship constructed for Canada’s Merchant Navy in 1944 as part of Canada's Park ship program.

Paul Curtis was an American shipbuilder who built ships in Medford, Massachusetts.

<span class="mw-page-title-main">Irving Shipbuilding</span> Canadian shipbuilder

Irving Shipbuilding Inc. is a Canadian shipbuilder and in-service support provider. The company owns industrial fabricators Woodside Industries in Dartmouth, Marine Fabricators in Dartmouth, Halifax Shipyard as the largest facility and company head office as well as Halifax-based Fleetway Inc., an engineering and design, support and project management firm.

Joseph Salter was a Canadian businessman and politician, becoming Moncton’s first mayor and one of the leading shipbuilders in the Maritime Provinces. As a young man employed by John Leander Starr of Halifax, Salter crossed the Atlantic 36 times. He later built some of the finest and largest ships in Westmorland County. He kept a diary which was published in 1996.

<span class="mw-page-title-main">Thompson Bros. Machinery Co. Ltd.</span> Shipbuilding and repair facility

Thompson Bros. Machinery Co. Ltd. was a family owned and operated shipbuilding and repair facility located in Liverpool, Queens County, Nova Scotia. Founded in the early 1900s, it continued to operate under different owners until 2004. The shipyard was notable for its World War II work refitting large numbers of corvettes for the Royal Canadian Navy.

SS Victoria Park was a general cargo steamship built in 1943, the first of 24 wartime Park Ships that were built in the Pictou Shipyard in Pictou, Nova Scotia in the 1940s. Victoria Park was built by Foundation Maritime Ltd. April 27, 1943. Built as a merchant steamship constructed for Canada’s Merchant Navy. and was originally built for the government of Canada's use as a cargo vessel.

<span class="mw-page-title-main">Pictou Harbour</span> Natural harbour in Nova Scotia; its geography and history

Pictou Harbour is a natural harbour in Nova Scotia on the Northumberland Strait.

Captain William Lowden was an early shipbuilder and pioneer of Pictou, Nova Scotia. With his sons, he built the first shipyard in Pictou in 1788. For his achievements, he is considered to be the father of shipbuilding in Pictou.

References

  1. Wallis, Ron (2004). The Story of Pictou’s Park Ships. Pictou: Ron Wallis. p. 1.
  2. 1 2 3 Sherwood, Roland H. (1945). Pictou Parade. Sackville, New Brunswick: The Tribune Press. pp. 12–13.
  3. "Home". pictoushipyard.com.
  4. 1 2 3 4 5 6 7 8 9 Cameron, James M. (1990). The Ships, Shipbuilders and Seamen of Pictou County. Antigonish, Nova Scotia: Pictou County Historical Society.
  5. Wallis, The Story of Pictou’s Park Ships.

45°40′41″N62°42′00″W / 45.678°N 62.700°W / 45.678; -62.700