Plasma railgun

Last updated

A plasma railgun is a linear accelerator which, like a projectile railgun, uses two long parallel electrodes to accelerate a "sliding short" armature. However, in a plasma railgun, the armature and ejected projectile consists of plasma, or hot, ionized, gas-like particles, instead of a solid slug of material. Scientific plasma railguns are typically operated in vacuum and not at air pressure. They are of value because they produce muzzle velocities of up to several hundreds of kilometers per second. Because of this, these devices have applications in magnetic confinement fusion (MCF), magneto-inertial fusion (MIF), high energy density physics research (HEDP), laboratory astrophysics, and as a plasma propulsion engine for spacecraft.

Contents

Theory

Plasma railguns appear in two principal topologies, linear and coaxial. Linear railguns consist of two flat plate electrodes separated by insulating spacers and accelerate sheet armatures. Coaxial railguns accelerate toroidal plasma armatures using a hollow outer conductor and a central, concentric, inner conductor.

Linear plasma railguns place extreme demands on their insulators, as they must be an electrically insulating, plasma-facing vacuum component which can withstand both thermal and acoustic shocks. Additionally, a complex triple joint seal may exist at the breech of the bore, which can often pose an extreme engineering challenge. Coaxial accelerators require insulators only at the breech, but the plasma armature in that case is subject to the "blow-by" instability. This is an instability in which the magnetic pressure front can out-run or "blow-by" the plasma armature due to the radial dependence of acceleration current density, drastically reducing device efficiency. Coaxial accelerators use various techniques to mitigate this instability. In either design, a plasma armature is formed at the breech. As plasma railguns are an open area of research, the method of armature formation varies. However, techniques including exploding foils, gas cell burst disk injection, neutral gas injection via fast gas valve, and plasma capillary injection have been employed.

After armature formation, the plasmoid is then accelerated down the length of the railgun by a current pulse driven through one electrode, through the armature, and out the other electrode, creating a large magnetic field behind the armature. Since the driver current through the armature is also moving through and normal to a self-generated magnetic field, the armature particles experience a Lorentz force, accelerating them down the length of the gun. Accelerator electrode geometry and materials are also open areas of research.

Applications

Controlled jets from plasma rail guns can have peak densities in the 1013 to 1016 particles/m3 range, and velocities from 5 to 200 km/s, depending on device design configuration and operating parameters, and the upper limits may be higher. [ citation needed ] Plasma rail guns are being evaluated for applications in magnetic confinement fusion for disruption mitigation and tokamak refueling. [1]

Magneto-inertial fusion seeks to implode a magnetized D-T fusion target using a spherically symmetric, collapsing, conducting liner. Plasma railguns are being evaluated as a possible method of implosion linear formation for fusion.[ citation needed ]

Arrays of plasma railguns could be used to create pulsed implosions of ~1 Megabar peak pressure, allowing more access to chart this opening area of plasma physics.[ citation needed ]

High velocity jets of controllable density and temperature allow astrophysical phenomena such as solar wind, galactic jets, solar events and astrophysical plasma to be partially simulated in the laboratory and measured directly, in addition to astronomic and satellite observations.[ citation needed ]

Examples

DeviceInstitution
Marshal gun [2] Los Alamos National Laboratory
Compact Toroid Accelerator (CTA) [3]
MARAUDER [4] Kirtland Air Force Base
RACE [5] Lawrence Livermore National Lab
Compact Toroid Injection Experiment (CTIX) [6] University of California, Davis
Compact torus accelerator (CTA) [7] Lawrence Livermore National Laboratory
Compact Torus Injector [8] University of Saskatchewan, Canada
Compact Torus Injector (HIT-CTI) [9] Himeji Institute of Technology, Japan
Pulsed High Density Fusion Experiment (PHD) [10] University of Washington
Fusion Plasma Injector [11] General Fusion, Canada
Linear and coaxial railguns [12] HyperJet Fusion Corp., USA
Linear and coaxial railguns [13] NearStar Fusion Inc., USA

See also

Related Research Articles

<span class="mw-page-title-main">Stellarator</span> Plasma device using external magnets to confine plasma

A stellarator is a plasma device that relies primarily on external magnets to confine a plasma. Scientists researching magnetic confinement fusion aim to use stellarator devices as a vessel for nuclear fusion reactions. The name refers to the possibility of harnessing the power source of the stars, such as the Sun. It is one of the earliest fusion power devices, along with the z-pinch and magnetic mirror.

<span class="mw-page-title-main">Tokamak</span> Magnetic confinement device used to produce thermonuclear fusion power

A tokamak is a device which uses a powerful magnetic field to confine plasma in the shape of a torus. The tokamak is one of several types of magnetic confinement devices being developed to produce controlled thermonuclear fusion power. As of 2016, it was the leading candidate for a practical fusion reactor. The word "tokamak" is derived from a Russian acronym meaning "toroidal chamber with magnetic coils".

<span class="mw-page-title-main">Fusion power</span> Electricity generation through nuclear fusion

Fusion power is a proposed form of power generation that would generate electricity by using heat from nuclear fusion reactions. In a fusion process, two lighter atomic nuclei combine to form a heavier nucleus, while releasing energy. Devices designed to harness this energy are known as fusion reactors. Research into fusion reactors began in the 1940s, but as of 2023, no device has reached net power.

This timeline of nuclear fusion is an incomplete chronological summary of significant events in the study and use of nuclear fusion.

<span class="mw-page-title-main">Magnetic confinement fusion</span> Approach to controlled thermonuclear fusion using magnetic fields

Magnetic confinement fusion (MCF) is an approach to generate thermonuclear fusion power that uses magnetic fields to confine fusion fuel in the form of a plasma. Magnetic confinement is one of two major branches of controlled fusion research, along with inertial confinement fusion.

<span class="mw-page-title-main">Field-reversed configuration</span> Magnetic confinement fusion reactor

A field-reversed configuration (FRC) is a type of plasma device studied as a means of producing nuclear fusion. It confines a plasma on closed magnetic field lines without a central penetration. In an FRC, the plasma has the form of a self-stable torus, similar to a smoke ring.

<span class="mw-page-title-main">Spheromak</span>

A spheromak is an arrangement of plasma formed into a toroidal shape similar to a smoke ring. The spheromak contains large internal electric currents and their associated magnetic fields arranged so the magnetohydrodynamic forces within the spheromak are nearly balanced, resulting in long-lived (microsecond) confinement times without external fields. Spheromaks belong to a type of plasma configuration referred to as the compact toroids. A spheromak can be made and sustained using magnetic flux injection, leading to a dynomak.

Plasma gun may refer to:

<span class="mw-page-title-main">Madison Symmetric Torus</span>

The Madison Symmetric Torus (MST) is a reversed field pinch (RFP) physics experiment with applications to both fusion energy research and astrophysical plasmas.

MARAUDER was a United States Air Force Research Laboratory project concerning the development of a coaxial plasma railgun. The first computer simulations occurred in 1990, and its first published experiment appeared on August 1, 1993.

The Plasma Physics Laboratory at the University of Saskatchewan was established in 1959 by H. M. Skarsgard. Early work centered on research with a Betatron.

The Enormous Toroidal Plasma Device (ETPD) is an experimental physics device housed at the Basic Plasma Science Facility at University of California, Los Angeles (UCLA). It previously operated as the Electric Tokamak (ET) between 1999 and 2006 and was noted for being the world's largest tokamak before being decommissioned due to the lack of support and funding. The machine was renamed to ETPD in 2009. At present, the machine is undergoing upgrades to be re-purposed into a general laboratory for experimental plasma physics research.

The polywell is a design for a fusion reactor based on two ideas: heating ions by concentrating (-) charge to accelerate the ions and trapping a diamagnetic plasma inside a cusp field.

Plasma cannon may refer to:

Compact toroids are a class of toroidal plasma configurations that are self-stable, and whose configuration does not require magnet coils running through the center of the toroid. They are studied primarily in the field of fusion energy, where the lack of complex magnets and a simple geometry may allow the construction of dramatically simpler and less expensive fusion reactors.

Robert James Goldston is a professor of astrophysics at Princeton University and a former director of the Princeton Plasma Physics Laboratory.

<span class="mw-page-title-main">Compact Toroidal Hybrid</span>

The Compact Toroidal Hybrid (CTH) is an experimental device at Auburn University that uses magnetic fields to confine high-temperature plasmas. CTH is a torsatron type of stellarator with an external, continuously wound helical coil that generates the bulk of the magnetic field for containing a plasma.

The history of nuclear fusion began early in the 20th century as an inquiry into how stars powered themselves and expanded to incorporate a broad inquiry into the nature of matter and energy, as potential applications expanded to include warfare, energy production and rocket propulsion.

References

  1. R. Raman and K. Itami Conceptual Design Description of a CT Fueler for JT-60U(2000)
  2. Marshall, J. (January 1960). "Performance of a Hydromagnetic Plama Gun". Physics of Fluids. 3 (1): 134–135. Bibcode:1960PhFl....3..134M. doi:10.1063/1.1705989. OSTI   4191479.
  3. Voronin, A.V.; et al. (June 2008). Two stage plasma gun as the fuelling tool of Globus-M tokamak (PDF). 35th European Physical Society Conference on Plasma Physics.
  4. Seiler, S. (April 1993). Support to Survivability/Vulnerability Program (Report). Albuquerque: Logicon RDA. Archived from the original on July 1, 2015.
  5. Molvik, A. W.; Eddleman, J. L.; Hammer, J. H.; Hartman, C. W.; McLean, H. S. (14 January 1991). "Quasistatic compression of a compact torus". Physical Review Letters. 66 (2): 165–168. Bibcode:1991PhRvL..66..165M. doi:10.1103/PhysRevLett.66.165. PMID   10043527.
  6. Baker, K.L.; et al. (January 2002). "Compact toroid dynamics in the Compact Toroid Injection Experiment". Nuclear Fusion. 42 (1): 94. Bibcode:2002NucFu..42...94B. doi:10.1088/0029-5515/42/1/313. S2CID   250808512.
  7. Logan, B.G.; et al. (1 April 2005). Compact Torus Accelerator Driven Inertial Confinement Fusion Power Plant (PDF) (Report). Lawrence Livermore National Laboratory. UCRL-TR-211025.
  8. Liu, D; Xiao, C; Hirose, A. (January 2008). "Performance of the University of Saskatchewan compact torus injector with curved acceleration electrodes". Review of Scientific Instrumentation. 79 (1): 013502–013502–6. Bibcode:2008RScI...79a3502L. doi:10.1063/1.2828056. PMID   18248029.
  9. Fukumoto, N.; et al. (November 1997). Compact Torus Injection Experiments on the H.I.T. teststand and the JFT-2M tokamak. American Physical Society, Division of Plasma Physics Meeting. Bibcode:1997APS..DPPkWP205F.
  10. "PHD Experiment Homepage". University of Washington.
  11. Howard, Stephen; et al. (25 June 2008). Development of Merged Compact Toroids for Use as a Magnetized Target Fusion Plasma (PDF). Innovative Confinement Concepts Workshops (ICC). Reno NV.
  12. Witherspoon, F. D.; Case, A.; Messer, S.; Bomgardner II, R.; Phillips, M. W.; Brockington, S.; Elton, R. (2009). "A Contoured Gap Coaxial Plasma Gun with Injected Plasma Armature". Review of Scientific Instrumentation. 80 (8): 083506–083506–15. Bibcode:2009RScI...80h3506W. doi:10.1063/1.3202136. PMID   19725654.
  13. Witherspoon, F. D.; Case, A.; Messer, S.; Bomgardner II, R.; Phillips, M. W.; Brockington, S.; Elton, R. (2009). "A Contoured Gap Coaxial Plasma Gun with Injected Plasma Armature". Review of Scientific Instrumentation. 80 (8): 083506–083506–15. Bibcode:2009RScI...80h3506W. doi:10.1063/1.3202136. PMID   19725654.