| 661 | |
|---|---|
 | |
| Role | Passenger transport |
| National origin | France |
| Manufacturer | S.N.C.A.N. |
| First flight | 18 July 1937 |
| Primary user | Air Afrique |
| Number built | 2 |
The Potez 661 was a four-engined metal low-wing monoplane airliner developed in France just before World War II. The single example flew with Air Afrique on French colonial routes.
In 1936 the well-established Potez company became part of the Société Nationale de Constructions Aéronautique du Nord (S.N.C.A.N.), under the Law for the Nationalisation of Military Industries. [1] In 1937 they produced their first four-engined aircraft, the Type 661. This was [2] a commercial machine with seating for up to twelve passengers. It was a low wing cantilever, almost all-metal monoplane. The wing tapered with a nearly straight trailing edge [3] that carried outboard balanced ailerons and split trailing edge flaps over the whole of the centre section. The four 220 hp (164 kW) Renault 6Q inverted inline engines were conventionally mounted of the front wing spar and drove variable-pitch twin-bladed propellers.
The fuselage [2] was a metal monocoque, with a port side passenger door aft of six windows [3] on each side, one per seat. Though the standard seat arrangement was for twelve, two seats could be removed to allow the installation of chaises-longues for longer flights. The pilots' cabin was enclosed, with side by side dual control seating. The tail unit carried twin vertical endplate fins, slightly oval on a tailplane that had strong dihedral. The balanced rudders and elevators were metal structures with the only fabric covering used on the aircraft. The elevators carried trim tabs. There was a small tailwheel, the main undercarriage retracting into the inner engine nacelles.
The first flight was on 18 July 1937. [4] By August 1938 the 661 had completed its Air Ministry tests [5] and by April 1939 its 100 hr "endurance" tests. [6] In mid-April it was handed over to Air Afrique [7] and had made its first flight [6] on the trans-Africa route from Dakar to Pointe Noire. Though only one was built before the war, it gained the reputation of being an economical transport. [3] There were suggestions, in war-time England at least that the Potez 661 or its more powerful development the Potez 662 might be built in occupied France for German use, [3] but there is no evidence that any more were produced.
Data from Grey 1972, pp. 110c
General characteristics
Performance
The Caudron Simoun was a 1930s French four-seat touring monoplane. It was used as a mail plane by Air Bleu, flew record-setting long-range flights, and was also used as a liaison aircraft by the Armée de l'Air during World War II. The aircraft later was used as an inspiration to the famous Mooney "M series" aircraft by Jacques "Strop" Carusoam.
The Caudron C.640 Typhon was a 1930s French high-speed single-seat monoplane utility aircraft built by Caudron-Renault.
The Arpin A-1 was a two-seat low-wing monoplane which was powered by a single radial engine in pusher configuration, mounted behind the cabin between twin booms that carried the tail. An unconventional fixed tricycle undercarriage was fitted. Only one was built.
The Potez 43 was a family of French light utility and sports aircraft, developed in early 1930s. They were three-seat single-engine high-wing monoplanes.
The Farman F.430 was a 1930s French light transport designed and built by the Farman Aviation Works. Two variants with different engines were known as the F.431 and F.432.
The Potez 32 and its military version the Potez 33 was a single-engine French monoplane transport built by Potez and based on the Potez 29 biplane.
The Potez 36 was a French two-seat touring or sport monoplane designed and built by Potez. The Potez 36 was a high-wing braced monoplane with a conventional landing gear. It had an enclosed cabin with side-by-side seating for a pilot and passenger. The design had some unusual features like folding wings to make it easier to store or to tow behind a motor car. Some of the aircraft had Potez-designed leading-edge slats. The aircraft was popular with both French private owners and flying clubs with a small number being used by the French Air Force during the 1930s as liaison aircraft.
The Henschel Hs 121 was the first aircraft built by the German Henschel company. It was a high-wing monoplane with an inline engine, fixed undercarriage and single, open cockpit, designed as an advanced trainer. Only one aircraft was produced, in 1933-4, as a testpiece for the Air Ministry.
The Potez 662 was a higher powered and faster development of the Potez 661. Like its predecessor, it was a low wing, four engine monoplane carrying 12 passengers. Only one was built, serving with the French Air Ministry.
The Breda Ba.79S was a single-engine four-seat high-wing private aircraft built in Italy in the late 1930s. Only a few were produced.
The CANT Z.1012 was a small three-engined monoplane built in Italy in the late 1930s to carry either three or five passengers depending on the engines. A small number were built for Italian diplomatic use.
The Morane-Saulnier MS.341 was a single engine parasol wing training and touring aircraft built in France in the mid-1930s. It had two open cockpits in tandem and was sold to private owners, clubs and the Armée de l'Air.
The SNCAC NC-600 was a prototype French twin-engined long-range fighter aircraft, developed by SNCAC from the earlier Hanriot H.220 fighter. The type never entered service, with development being ended by the French surrender in June 1940.
The Potez-CAMS 160 was a one-off 5/13 scale flight model built in France, first flown in the summer of 1938 to test aerodynamic and hydrodynamic qualities of the Potez-CAMS 161 airliner and mail carrier, which was too large for detailed modelling in existing wind tunnels.
The Potez-CAMS 161 was a large, French six-engined flying boat airliner, designed to operate on the North Atlantic routes that were opening up in the late 1930s. Its development was almost halted by World War II. Just one was built and partially tested before its destruction by Allied forces near the war's end.
The Potez 28 was a French aircraft designed in the 1920s to set distance records, built in both sesquiplane and monoplane versions. Only two were completed but both set several long distance records.
The Renault 6Q, also called the Renault Bengali 6, is an air-cooled six-cylinder, inverted piston engine, producing about 160 kW (220 hp) continuous power. It was designed and built in France and produced for more than ten years after its homologation in 1936, with large numbers built during World War II.
The SFCA Lignel 20 was a French, single engine, low wing monoplane, one of a series of this type built by SFCA in the 1930s. It was capable of aerobatics but was primarily a racing aircraft.
The SEA.1 was a Belgian, multi-purpose, light twin engine monoplane flown in 1936. Only one was built; it was later converted into a single engine aircraft and used by the military.
The Levasseur PL.400 was an artillery observation / liaison aircraft built by Société Pierre Levasseur Aéronautique in the late 1930s.
 | Wikimedia Commons has media related to Potez 661 . |