Potez 230

Last updated
Potez 230
RoleFighter aircraft
National originFrance
ManufacturerSociété Nationale de Constructions Aéronautiques du Nord (SNCAN)
First flight30 March 1940
StatusPrototype
Number built1
Developed from ANF Les Mureaux 190

The Potez 230 was a French lightweight single-seat, single-engined fighter aircraft. One prototype was built and flew in 1940, but no production followed, with the prototype being captured and shipped to Germany for study.

Contents

Design and development

In 1936, ANF Les Mureaux designed and flew the ANF Les Mureaux 190, a lightweight single-engined fighter aircraft powered by a 340 kW (450 hp) ANF Les Mureaux 190 engine and with a fixed undercarriage. The unreliability of the engine caused the 190 to be abandoned in 1937. [1] Despite this setback, and the nationalisation of ANF Les Mureaux to form part of the state-owned SNCAN combine, the former design team of Les Mureaux, René Lemaitre and Hubert led by André Brunet, did not abandon the concept of lightweight fighters, and in 1938, began work on the Potez 230, [lower-alpha 1] a more advanced development of the Les Mureaux 190. [4] [5]

Like the earlier aircraft, the Potez 230 was a low-wing cantilever monoplane, with a similar elliptical wing. The wings were built around an integral torsion box, the first example of this structure to have flown, and were fitted with split trailing-edge flaps. The aircraft's fuselage was of oval cross-section, with the pilot accommodated in an enclosed cockpit. The aircraft was powered by a 500 kW (670 hp) Hispano-Suiza 12Xcrs V12 engine driving a three-bladed Ratier propeller in a tractor configuration. Armament was planned to be a single Hispano-Suiza 20 mm cannon mounted between the engine cylinder banks and firing through the propeller, with four 7.5 mm machine guns to be mounted in the wings. [5] [6]

The unarmed prototype made its maiden flight at Villacoublay on 30 March 1940. [4] Testing was relatively trouble-free, with the aircraft reaching a speed of 439 km/h (273 mph) at sea level and 560 km/h (348 mph) at 5,000 m (16,400 ft), with it being planned to fit a more powerful Hispano-Suiza 12Y engine. The German invasion of France disrupted testing, however, with the prototype captured by the Germans when they seized Villacoublay airfield in June 1940. The Germans were interested in the novel wing torsion box, and the prototype, together with all available drawings and data, was shipped to Germany for closer study. [5] [6]

Specifications

Data from The Complete Book of Fighters [5]

General characteristics

Performance

Armament
(planned)

See also

Related development

Aircraft of comparable role, configuration, and era

Notes

  1. All SNCAN designs, no matter what part of the conglomerate they originated from, were named as Potez aircraft owing to the prestige associated with the name. [2] [3]
  1. Green and Swanborough 1994, p. 19.
  2. Green 1967, p. 64.
  3. Breffort and Jouineau 2005, p. 80.
  4. 1 2 Green 1960, p. 60.
  5. 1 2 3 4 Green and Swanborough 1994, pp. 482–483.
  6. 1 2 Green 1960, pp. 60–61.

Related Research Articles

Arsenal VG-33

The Arsenal VG-33 was one of a series of fast French light fighter aircraft under development at the start of World War II, but which matured too late to see extensive service in the French Air Force during the Battle of France.

Blériot-SPAD S.510

The Blériot SPAD S.510 was a French single-seat, single-engined biplane fighter aircraft. First flying in 1933, 60 were built for the Armée de l'Air, entering service in 1936. The type remained in service as a fighter-trainer at the start of the Second World War. It was the last French biplane fighter to enter production.

Bloch MB.170 1938 bomber aircraft family by Avion Marcel Bloch

The Bloch MB.170 and its derivatives were French reconnaissance bombers designed and built shortly before the Second World War. They were the best aircraft of this type available to the Armée de l'Air at the outbreak of the war, with speed, altitude and manoeuvrability that allowed them to evade interception by the German fighters. Although the aircraft could have been in service by 1937, debate over what role to give the aircraft delayed deliveries until 1940.

Potez 630 French twin-engined heavy fighter of World War II

The Potez 630 and its derivatives were a family of twin-engined, multirole aircraft developed for the French Air Force in the late 1930s. The design was a contemporary of the British Bristol Blenheim and the German Messerschmitt Bf 110.

ANF Les Mureaux 113

The ANF Les Mureaux 110 and its derivatives were a family of French reconnaissance aircraft developed in the 1930s. They were all-metal, parasol-wing monoplanes that seated the pilot and observer in tandem open cockpits. The aircraft were widely used in the Battle of France, but were all scrapped soon thereafter.

SNCASE SE.100 French prototype of heavy fighter

The SNCASE SE.100 was a French two-seat, twin-engined fighter which first flew in 1939. Mass production was planned to begin late in 1940 but the Fall of France prevented this.

Potez 39

The Potez 39 was a French two-seat single-engined parasol wing monoplane reconnaissance and observation aircraft of the 1930s.

Latécoère 490 French reconnaissance aircraft prototype of 1931

The Latécoère 490 was a two-seat, single-engined parasol winged aircraft, designed to a French photographic reconnaissance specification of 1928. Only two prototypes were built.

SNCAC NC.150

The SNCAC NC.150 was a prototype French high-altitude bomber aircraft designed and flown just prior to the start of the Second World War. It was a twin-engined monoplane, with a third engine driving a supercharger. Although testing was promising, and orders were planned for a modified version as a back-up for the Lioré et Olivier LeO 45 and Amiot 354 bombers, the surrender of France in June 1940 ended development with only the single example being built.

SNCAO 200

The SNCAO 200, sometimes written CAO.200, was a prototype French single seat fighter aircraft of the 1930s. It was a single engined monoplane intended to compete with the Dewoitine D.520, but was unsuccessful, only a single example being built.

Romano R.90

The Romano R.90 was a prototype single-seat French floatplane fighter of the 1930s. A single example of the R.90 was built, but the type did form the basis of the Romano R.83 and Romano R.92 fighters which were built in secret for the Spanish Republicans during the Spanish Civil War.

ANF Les Mureaux 170

The ANF Les Mureaux 170 was a prototype French fighter aircraft of the 1930s. It was a single-engined, single-seat parasol monoplane, but only two were built, the type being rejected for service by the French Air Force.

ANF Les Mureaux 190

The ANF Les Mureaux 190 was a French prototype light fighter aircraft. In response to a program created by the French Minister of Air, the ANF Les Mureaux 190 was designed by André Brunet as a light fighter. The ANF Les Mureaux 190 was an all-metal monoplane, and was first tested in July 1936, then taken to the 15th Paris Air Show in late November, where it was asserted to be very manoeuvrable. However, less than a year later, the project was abandoned due to the poor quality of its engine.

Potez 37 French reconnaissance aircraft of the 1930s

The Potez 37 was a two-seat, long range reconnaissance aircraft built to compete for a French government contract. It flew in mid-1930 but did not win the competition, so only two were completed.

Wibault 170 Tornade

The Wibault 13C.1 Trombe (Whirlwind), later known as the Wib 130C.1 Trombe was a single seat, parasol wing lightweight fighter aircraft designed and built in France in the 1920s. It was developed into the more powerful Wib 170C.1 Tornade (Tornado) but government interest in lightweight fighters soon waned.

Wibault 210

The Wibault Wib 210 C.1 was a single engine, single seat low wing monoplane fighter aircraft, designed and built in France in the late 1920s. Flight tests revealed vibration problems and development was quickly abandoned.

The Potez 220 was a prototype French twin-engined, three-seat reconnaissance and army cooperation aircraft. Two examples were built in 1939, but no production followed.

ANF Les Mureaux 180

The ANF Les Mureaux 180 was a prototype French fighter aircraft of the 1930s. designed and built by Les Ateliers de Construction du Nord de la France et des Mureaux. It was a single-engined, two-seat, gull wing monoplane, only one was built and the programme was abandoned as obsolete.

Les Mureaux 3

The Les Mureaux 3 C.2 and Les Mureaux 4 C.2 were French two seat, parasol winged fighters, flown in 1927-8, which differed only in their engines. They were developed into near identical army co-operation types, the ANF Les Mureaux 130 A.2 and ANF Les Mureaux 131 A.2, in 1929-31.

Nieuport-Delage NiD 580

The Nieuport-Delage NiD 580 R.2 was a contender for a French government contract for a long range, two seat reconnaissance aircraft, issued in 1928. There were eight prototypes in the 1931-2 contest and the NiD 580 was not selected for production.

References