| Potez 40 | |
|---|---|
 | |
| Role | Colonial policing and transport aircraft |
| National origin | France |
| Manufacturer | Societe des Avions Henri Potez |
| First flight | Late February - March 1931 |
| Number built | 1 |
The Potez 40 was a French three-engine, braced high-wing monoplane designed and built in response to a French government programme for colonial transport and policing aircraft duties. [1]
The Potez 40 was an all-metal aircraft covered with duralumin, longitudinally corrugated at approximately 100 mm (4 in) pitch throughout. [2] The wing was rectangular in plan apart from its rounded tips and was built around two I-section spars. On each side a parallel pair of airfoil section struts braced the wing from the forward and rear spars to the lower fuselage longeron. [1]
The fuselage was in three demountable parts. [3] The nose region forward of the pilot was smooth and slightly rounded but merged into a corrugated, flat sided and rectangular cross-section fuselage. The central Salmson 9Ab 172 kW (230 hp) nine cylinder radial engine was mounted on the extreme nose, completely uncowled and driving a two bladed propeller. The pilot's compartment had a shallow, framed and angled pair of plane windscreens just ahead of the wing leading edge with an internal door to the main cabin, which was lit by long, shallow side windows and accessed by a large triangular door defined by the lattice fuselage structure. [1] Just behind the wing trailing edge there was an open dorsal gunner's position, which at some point in the Type 40's development housed a pair of machine guns on a standard rotatable mounting [1] [4] The detachable rear section carried the empennage, which was constructed in a similar way to the wings. In early drawings the fin was triangular and the rudder unbalanced [1] though this was modified by the time the Potez 40 was displayed, unflown, at the 1930 Paris Salon into a taller vertical tail with a clearly extended tip. [4] The horizontal tail was mounted near the base of the fin and was semi-elliptical, with straight leading edges and recessed elevators. It was braced from below with a pair of struts on both sides [1]
The two outer Salmson engines were mounted, uncowled, on the forward wing bracing struts, with extended streamlined bodies behind them which connected to the rear bracing strut; the forward struts were reinforced by jury struts to the wing roots and the rear bracing struts by vertical jury struts to the rear spar. [1] [4] The Potez 40 had a tailwheel undercarriage with its main legs with rubber shock absorbers mounted vertically below the outer engine extensions; the mainwheels were hinged on widely spaced V-Struts from the lower fuselage [1] and were sometimes enclosed under spats. [4]
The Potez 40 made it first flight at Méaulte around the end of February 1931 [5] and after satisfactory initial trials [6] was flown to the military test centre at Villacoublay at the end of May 1931. [7] After a long period of modification, it returned to Villacoublay for competitive tests in late 1932. [8] In the interval it was tested with two other makes of engines and proposed as a commercial transport. [9] It was Potez's last three-engine design. By 1935, the development of the Potez 40 had been abandoned, and the airframe was offered for sale. [10]
Data from Les Ailes (2 April 1931) [1]
General characteristics
Performance
The Potez 37 was a two-seat, long range reconnaissance aircraft built to compete for a French government contract. It flew in mid-1930 but did not win the competition, so only two were completed.
The Caudron C.251 Et-2 was a French tandem seat, open cockpit biplane designed as an intermediate trainer and built in 1931. It did not go into production.
The Caudron C.220 was a two-seat French biplane trainer. Only two were built, using different engines.
The Caudron C.140 was a French tandem cockpit sesquiplane designed in 1928 as a combination of liaison aircraft and observer and gunnery trainer.
The Potez 51 was a 1930s French intermediate trainer, intended to replace the ageing Potez 25 which had sold worldwide. It did not go into production.
The Potez 50 or Potez 50 A2 was a French two seat military multi-role aircraft, first flown in 1931. It did not go into service but seven variants using five different engines were produced, one of them setting several speed with useful load records and another, the Potez 506, setting three altitude world records.
The Weymann-Lepère WEL-80 R.2 was a French two seat reconnaissance aircraft built to compete for a 1928 government contract. It was not successful and did not enter production.
The Dewoitine D.480 was a French single engine side-by-side sports and training aircraft built in the early 1930s. Two were completed and flew with several different radial engines. One remained active through the 1950s.
The Kellner-Béchereau 23 was a French two seat cabin touring aircraft, built in 1932. Its wing was constructed in a novel way. Only one was completed.
The Nieuport-Delage NiD 740 was a French trimotor monoplane designed to carry night mail. Two were built in 1930.
The Guillemin JG.40 was designed and built to meet a French government requirement for a small air ambulance capable of operating in the colonies. Two were completed and performed well but the JG.40 did not reach production.
The Potez 42 was designed and built in 1930 to meet a French government requirement for a small air ambulance capable of operating in the colonies. It did not reach production.
The Lorraine-Hanriot LH.21S was designed and built in 1930 to meet a French government requirement for a small air ambulance capable of operating in the colonies. It did not reach production.
The Guillemin JG.10 or Blériot-Guillemin JG.10 was a French two seat touring aircraft, designed to be as simple and safe to fly and maintain as a car, with similar facilities, as well as provision for parachutes.
The Mauboussin M.112, M-12 or Mauboussin M.XII was originally called the Peyret-Mauboussin PM XII and was renamed when Mauboussin founded his own company in 1931, ending his partnership with Louis Peyret. It was a French, single-engine, two-seat, low cantilever wing touring monoplane. At least six were built.
The Aviaméta 92 was a French, all-metal, five seat monoplane built in the late 1920s. Three different engines were fitted, and one example flew the first non-stop Paris-Algiers flight in preparation for an abandoned trans-Atlantic attempt.
The Hanriot H.46 Styx was a French, single-engined, parasol wing aircraft which could equally be configured for training, liaison or ambulance roles; in the latter form it was able to accept a patient on a stretcher. Several different engines were fitted and flown but the type did not reach production.
The Guerchais-Henriot T-2 was a French low-power, two-seat cabin cantilever monoplane built in 1928. Only one was flown.
The Bourgois-Sénémaud AT was a parasol wing, two seat touring aircraft built in France in 1928. Three examples were completed.
The Albert A-10 was a four-seat French transport aircraft which could be rapidly converted into an air ambulance. Two or three examples were built between 1929 and 1932, using at least two different engines, but neither variant reached production.
