The Reliant Rebel is a small four-wheeled car that was produced by Reliant between 1964 and 1974. It was designed by Reliant to be a market test to push Reliant into other parts of the market instead of just 3-wheelers.
It was marketed as the smart alternative, because it had a rust-free glass-fibre body, a robust chassis and frugal fuel economy. Many models were produced from 600cc, 700cc, and 750cc with saloon, estate and van variants. It was considered a niche rival to the AustinMini and Hillman Imp.
Development
The Rebel was the brainchild of Reliant Managing Director Ray Wiggin[2] and was developed after the death of T.L. Williams, the founder of Reliant.
Wiggin believed in the future people would be driving small 4 wheeled cars in a new car segment as the Austin Mini launch had been so successful and the UK microcar/3 wheeler segment would die off, such as Reliant's Regal, so Reliant engineers, after working on the development of the four-wheeled Sabra Carmel with Autocars of Haifa, Israel[3] decided to modify the then-current Regal 3/25 to create a four-wheel vehicle.
They built a rolling chassis using a cut and welded Regal 3/25 chassis and drove it around the Two Gates factory to see if it would work. It was however felt that Reliant's 598cc engine wouldn't pull the weight of a finished car; consequently, Reliant engineers wanted to keep the 600 engine but tuned it by skimmed the cylinder head and fitted larger valves to give better torque to cope with the car's extra weight.
The Rebel would get its front suspension from the Triumph Herald, brakes from the Triumph Courier van and the steering box from the Standard 10.
Reliant asked Ogle Design to design the Rebel, with the idea that it should look completely different from the Regal, but should save production costs by retaining some of the Regal's parts such as its doors, windscreen and dashboard. The resulting car was 138 ins.(3505mm) in length, 58 ins. (1473mm) in width, with a wheelbase of 89 ins. (2261mm). The kerb weight of the Rebel depending on the model was between 1185lbs. and 1327lbs. (539kg to 603kg).[4] The Rebel made its public debut at the Earls Court Motor Show in 1964.[2] The show cars were pre-production models, built in Turkey and driven to Earls Court to test their durability.
Lots of media attention was given to the Rebel at launch at the Earls Court Motor Show with many publications praising the new Reliant small 4 wheeler, Reliant had over 1000 notices of interest from the public at the show from people interested in purchasing the new car.
Sadly for Reliant they could not fill these early orders, Rebel production was always low and frustrating for customers since Reliant hadn't expanded its factory to give the Rebel its own production line, Reliant instead spent the money making a new production line and factory building for the new Scimitar Coupe which was launched alongside the rebel in 1964. So for every Rebel produced Reliant had to shut down Regal production for the Rebel to be produced on that line, something management didn't want to do since the Regal was very in demand and more profitable, this was the reason why there was a big marketing push when the Rebel was launched with very few cars being produced thereafter.
The Rebel didn't get its own dedicated production line until 1971 during Rebel 700 production. It then lost it in 1974 along with the Bond Bug in order to increase production of the newly launched Reliant Robin to keep up with demand after its 1973 launch.
Not having Rebels readily available at dealers after its launch and for several years thereafter, are the main reasons why production numbers were so low compared to the Regal 3/25 and 3/30 which sold over 100/000 cars over same period. Ray Wiggins had developed the Rebel as a marketing exercise for Reliant to push the company into new parts of market. He wanted people to become aware that Reliant was in this segment of the market, but he did not push the Rebel to sell in huge numbers as expected. Management were more concerned about 3-wheeler production rather than Ray Wiggin's longer-term view.
Models
The Rebel launched in October 1964 as a saloon with the same 598cc engine as used in the Reliant Regal 3/25 and only one trim level, but with an accessory list. These vehicles were only produced in two production batches in the Tamworth factory in November/December totaling in only around 100 original Rebel built. These vehicles are mostly seen as pre-production as they were built for dealer demonstrations only and the specification changed between each vehicle as the factory tested different fabrics and materials for the interior. The main differences in these early models were the interior which used the dashboard and steering wheel from the regal 3/25, bonnet hinges hidden in the body work, the spare wheel that was fitted under the bonnet and the interior having minimal carpeting and black gel coat.
Rebel prototypes had a larger front grille, after testing it was found to make the cars run too cool so on early cars the grille was not cut out of the molding leaving a "dummy grille" as some people call it.
600
Only 6 months after the Rebel's launch in 1965, it was relaunched as the Rebel Deluxe (but never actually using this name again). The car was updated with a new dashboard design using different instruments, thicker seats for greater comfort and five leaf springs in the rear instead of seven for a softer ride. The top half of the grill was deleted completely and filled in smooth, orange front indicators replaced the original clear units and a unique steering wheel was added. This model in later years was simply named the Rebel 600.
700
The Rebel 700, introduced in October 1967,[2] had several major changes from the 600, including a full chassis redesign using stronger steel and construction, a new engine of 701cc, a move to negative earth and many other specification changes. At the Earl's Court Motor Show the estate model was shown for the first time and also announced it was on sale now. The estate used longer rear windows and a large side hinged rear door. Combined with the new fold-flat rear seat this made the Rebel estate incredibly practical, and within two years it was the best-selling model.[2] Later, side windows that slid open could be ordered. In 1971, a van version of the Rebel was introduced after many Rebel estate buyers' enquiries. The van model was basically the estate but without windows. Rear seats could still be ordered in the van with a rear window DIY kit offered by Reliant dealers - thus meaning you could buy a Rebel van make it into an estate avoiding a large amount of tax.[2] Both the estate and the van offered 46 cu. ft. of load space, which increased in the van to 60 cu. ft. without the optional front passenger seat.[5] Not many Rebel 700 Vans were produced as production was in development for the 750, many more 750 vans were produced.
750
The next evolution of the Rebel was the 750 model, introduced in October 1972.[2] This car gained some parts with the three-wheeled Reliant Robin that was due to be introduced in 1973, parts gained were:
The new 748cc engine
Rear light clusters
Modified version of the 4 speed all sycro gearbox
Radiator
The Rebel 750 was the most popular Rebel as Reliant gave the Rebel a big marketing push in magazines and newspapers including full-page colour ads, because of this many people were only discovering the Rebel for the first time now with its large range of models. The interior also had a large change, fatter more comfortable front seats were used with a soft touch padded dashboard, all the interiors now used black vinyl seats and black carpets. Van production saw a short-lived effort to produce more as Royal Mail needed a replacement for its fleet of Morris vans, they had already trialed the Reliant Supervan but thought the more conventional Rebel van would be a good replacement, only as little as 10 vans were trialed. In early 1974 with the new Reliant Robin proving to be so popular production on all other models including the Rebel, Bond Bug, Reliant TW9 ended so more Robin models could be made. In 1975 the Rebel would be replaced with the Reliant Kitten.
Reliant Rebel saloon
Reliant Rebel estate
Estate legacy
The Reliant Rebel estate was the first time Reliant would build a small estate vehicle using a large side hinged door with fold-flat rear seats. Owing to the popularity of this design, Reliant would carry on using this formula for the Regal, Robin and Rialto models until 1998.
Engines
The Rebel used all of Reliant's own all aluminium OHV engines (based on a reverse-engineered 803cc Standard SC engine used in the discontinued Standard Eight). [6][7]
The car was launched with a 598cc engine producing 28 horsepower, this was 4 more horsepower than standard 600cc from the regal 3/25, this was done as the car felt sluggish with its extra weight.
After the introduction of the 70mph speed limit on British motorways the new speed limit was seen as a target, any vehicle with a top speed lower than 70mph was seen to be slow, with this Reliant increased the engine size to 701cc and 31hp, the new engine was then used in both the Rebel and the Regal.[2] The latter model was then named the Rebel 700 in time for the October 1967 London Motor Show.[8] The larger engine gave the Rebel a top speed of 70mph and would later be fitted into the Regal three-wheeler becoming the regal 3/30.
By 1972 reliant fitted the 750cc engine to the rebel, this was to test the new engine before the launch of the new reliant robin the next year, the same was done with the bond bug 750. At the 1972 Motor Show Reliant launched the reliant 750, with 35hp it gave the Rebel 750 a top speed of 80mph[2] but also gave better MPG of up to 65 the gallon.
Rebel engines were always of higher compression[4] and higher horsepower because of the car's additional weight compared to the three-wheeled variants. Reliant always introduced a new engine size in the Rebel first, before the Regal or the related Bond Bug received it. All rebel engine numbers end with a capital R to signify it is a rebel engine with its modifications.
Chassis, suspension and steering
The chassis from its center back is similar to that of the three-wheeled Regal, but the Rebel features a conventional four-wheel configuration with the front chassis section containing conventional steering and suspension. In the Rebel's case, this is the steering box from a Standard Ten with wishbones, trunnions and ball-joints from the Triumph GT6 / Vitesse and Triumph Herald models. The Rebel's standard 12-in. steel wheels have a PCD of 4 x 4 in. (4 x 101.6mm)[4] and the car rides on 5.50 X 12 in. tyres.[3] The leaf springs on the rebel are not Regal as many people believe as the rebel leaf springs are longer.
Gearbox
The Rebel was introduced with a four-speed gearbox which features synchromesh on the top three ratios.[4] There is no synchro on first gear. The gearbox was based on that of the Regal, but had an extended tailshaft with a linkage for the gearstick.
By 1972 synchromesh had been extended to all four forward speeds as the gearbox was now based on the Robin gearbox. The gearstick was no longer on a linkage but "projects forward from the front of the transmission tunnel".[5] "The light-weight body material and the aluminium engine block meant that the car was some 15% lighter than the (slightly shorter) Mini and 35% lighter than the early Renault 5", which was also introduced in 1972.[4]
Production numbers
first registered September 1964
A total of 2,600 Rebels were made in saloon, estate and van variants. Most were sold in the UK but many were sold in the Caribbean islands.[4] Of the approximately 900 Rebels which were exported, a number of them were in left-hand drive form to suit some of their export market.[9]
As above most of the reasoning behind the low production numbers was Reliant didn't give the Rebel its own production line until 1971, before this if a batch of Rebels needed to be produced then Reliant had to stop production of its popular Regal 3/25, something which Reliant didn't want to do very often.
Rebel 1600 GT prototype
During the Rebel's production run, Reliant had been experimenting with a more sporting variant to complement the Scimitar GT and forthcoming Scimitar GTE. Whereas the existing Rebel was powered by 598-748cc engines with 25-35hp, the Rebel 1600 GT prototype [10] codenamed FW6 had been fitted with the 80hp and 92ft-lb (Net) / 91hp and 102ft-lb (SAE) 1599cc Ford Crossflow engine from the mk2 Ford Cortina 1600E. Reliant had a relationship with Ford using their engines in Reliant sports cars with Reliant building Ford's fibreglass truck cabs in return. The Rebel 1600 GT was a working road legal prototype and had it been given the go-ahead would have been launched in around 1968, but was never put into production as Reliant Management found out the Rebel 1600 GT could not only out perform the bigger Scimitar models (around the factory as Engineers had been racing them), but also reputedly featured a power-to-weight ratio of 204bhp per ton which would have exceeded that of many modern sportscars.
Related Research Articles
Reliant Motor Company was a British car manufacturer based in Tamworth, Staffordshire, England. It was founded in 1935 and ended car production in 2002, the company had been known as "Reliant Motor Company" until the 1990s when it became "Reliant Motors" and then finally became "Reliant Cars LTD" after production had ended of the Robin as the company was restructured to be a car import business. It is now a dormant company and the only entity left is a separate parts company created called "Reliant Partsworld" which produces parts for Reliant vehicles.
The Reliant Kitten is a small four-wheeled economy car which was manufactured from 1975 to 1982 in saloon, van and estate variants by the Reliant Motor Company in Tamworth, England. It was Reliant's second attempt at selling in the small car economy market after the 1960s Reliant Rebel.
The Reliant Fox is a small four-wheeled glass-fibre utility vehicle manufactured between 1983 and 1990 by the Reliant Motor Company in Tamworth, England. It used Reliant's own 848cc aluminium inline four-cylinder engine and a galvanised chassis based on that of the Reliant Kitten.
The Reliant Scimitar name was used for a series of sports car models produced by British car manufacturer Reliant between 1964 and 1986. During its 22-year production it evolved from a coupe (GT) into a sports estate (GTE), with a convertible variant (GTC) launched in 1980. All have a fibreglass body mounted on a steel box-section chassis, and Ford engines.
Berkeley Cars Ltd was a British car manufacturer based in Biggleswade, Bedfordshire. The company produced economical sporting microcars with motorcycle-derived engines from 322 cc to 692 cc and front wheel drive between 1956 and 1960.
Sharps Commercials Ltd was a British car maker based in Preston, Lancashire. It was founded in 1922 by Paul Sharp. It changed its name to Bond Cars Ltd in 1963. The company was taken over by the Reliant Motor Co Ltd of Tamworth, Staffordshire in February 1969, who eventually closed the Preston factory at the end of July 1970, transferring the spare parts business for the Bond Minicar, 875 saloon, 875 Ranger van and Equipe models to a firm called Bob Joyner & Son in Oldbury in the English Midlands. Reliant nevertheless continued to use the Bond name until 1974 on Bond Bug models made at their own Tamworth plant.
The Reliant Robin is a small three-wheeled car produced by the Reliant Motor Company in Tamworth, England. It was offered in several versions over a period of 30 years. It is the second-most popular fibreglass car in history after the Chevrolet Corvette, with Reliant being the second-biggest British car manufacturer for a time.
The Reliant Rialto is a three-wheeled car that was manufactured by Reliant Motor Company, replacing the original Mk 1 Reliant Robin in 1982. It featured a much squarer aerodynamic body, servicing panels, a single large windscreen wiper, a thicker fibreglass body, and altered interior, but the chassis, engine, and a lot of large components were carried over from the previous model. The improvements gave the Rialto improved high-speed stability as well as improved fuel economy.
The Austin 7 is an economy car that was produced from 1923 until 1939 in the United Kingdom by Austin. It was nicknamed the "Baby Austin" and was at that time one of the most popular cars produced for the British market and sold well abroad. Its effect on the British market was similar to that of the Model T Ford in the US, replacing most other British economy cars and cyclecars of the early 1920s. It was also licensed and copied by companies all over the world. The first BMW car, the BMW Dixi, was a licensed Austin 7. In France they were made and sold as Rosengarts, and in the United States they were built by the American Austin Car Company. In Japan, Nissan also used the 7 design as the basis for their first cars, although not under licence. This eventually led to a 1952 agreement for Nissan to build and sell Austins in Japan under the Austin name.
The Simca 1100 are a series of French compact family cars – mainly C-segment hatchbacks, but also a compact wagon and popular delivery vans – built for over 15 years by French car-maker Simca, from 1967 through 1982/1985. There was even a very early 'hot hatchback', and a family cross-over: the Matra Simca Rancho. The hatchbacks were replaced by the Simca-Talbot Horizon.
Albion Motors was a Scottish automobile and commercial vehicle manufacturer.
The Reliant Regal is a small three-wheeled car and van that was manufactured from 1952 to 1973 by the Reliant Motor Company in Tamworth, England, replacing the earlier Reliant Regent three-wheeled cyclecar van which had its origins in a design bought by Reliant from the Raleigh Bicycle Company. As a three-wheeled vehicle having a lightweight construction, under UK law it is considered a "tricycle" and can be driven on a full motorcycle licence. In 1962, with the release of the Reliant Regal 3/25, van and estate versions with a side-hinged rear door were marketed as the Reliant Supervan.
Dante Giacosa was an Italian automobile designer and engineer responsible for a range of Italian automobile designs — and for refining the front-wheel drive layout to an industry-standard configuration.
The Daimler SP250 is a sports car built by the Daimler Company, a British manufacturer in Coventry, from 1959 to 1964. It was the last car to be launched by Daimler before its parent company, the Birmingham Small Arms Company (BSA), sold it to Jaguar Cars in 1960.
Bond Minicar is a series of economical three-wheeled microcars which were manufactured by the British car manufacturer Sharp's Commercials Ltd, in Preston, Lancashire, between 1949 and 1966.
Sylva Autokits is a kit car manufacturer based in Lincolnshire, England. Sylva was founded in 1981 by Jeremy Phillips and has developed and produced a number of small and lightweight sports cars. Sylva cars have won a number of 750 Motor Club Kit Car championships.
The Reliant TW9, also known as the Reliant Ant, is a small, front-engined, rear-drive, three-wheeled truck that was produced from 1967 until 1987 by Reliant Motors in Tamworth and then by BTB Engineering in Leeds, England. Designed and built as a business utility vehicle, it was produced in a number of different versions for various needs.
John Crosthwaite was an English race car designer and engineer, active in both the United Kingdom and the United States.
The Bond Bug is a small British two-seat, three-wheeled automobile which was designed by Tom Karen of Ogle Design for Reliant Motor Company, who built it from 1970 to 1974, initially at Bond Cars Ltd factory, but subsequently at Reliant's Tamworth factory. It is a wedge-shaped microcar, with a lift-up canopy and side screens instead of conventional doors.
The Reliant Scimitar SS1 is an automobile which was produced by British manufacturer Reliant from 1984.
References
↑ Cardew, Basil (1966). Daily Express Review of the 1966 Motor Show. London: Beaverbrook Newspapers Ltd.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
