| Renfe Class 353 | |||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
The Renfe Class 353, formerly known as the T-3000 are a class of diesel-hydraulic locomotives built by Krauss-Maffei for express trains in Spain.
| Renfe Class 353 | |||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| | |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
The Renfe Class 353, formerly known as the T-3000 are a class of diesel-hydraulic locomotives built by Krauss-Maffei for express trains in Spain.
The class could be described as the bigger and better version of the Renfe Class 352, being similar in design, and from the same builder, but with more power and also two cabins to simplify operation.
They were delivered between 1968 and 1969, built to a similar two-engined hydraulic transmission design as the Class 352 but with Maybach 12-cylinder engine developing more power, 1,500 hp (1,100 kW) (at 1600 rpm) each, giving a tractive effort of 268 kN (60,000 lbf). Built with two interior walkways via the cabins, the locomotives were a little heavier than their predecessors at 88 t (87 long tons; 97 short tons).
The locomotives were fitted with coupling screws and Scharfenberg couplers. Auxiliary generators provide electrical power for the coaches.
Two sets of standard gauge bogies were also supplied, for cross border work (bogie exchange).
The locomotives were painted in red-silver.
A total of five diesel were acquired to pull the Talgo III coaches at a record speed of over 220 km/h (140 mph). Their commission was related to the inauguration of the Talgo III RD (dual gauge) coached train from Madrid to Paris via Burgos, Vitoria, Hendaya and Bordeaux.
The trains also worked other international trains such as Barcelona to Geneva via Narbonne, Montpellier and Culoz, and the Paris to Barcelona; taking charge of the train after it passed the change of gauge to broad Iberian gauge at the stations of Irún and Portbou.
In May 1972, one of them reached a speed of 222 km/h (138 mph) between Guadalajara and Azuqueca de Henares. Between Alcázar de San Juan and Rio Záncara, on 4 May 1978, 353-001 reached 230 kilometres per hour (140 mph), for some time the class held the world speed record for diesel traction.[ citation needed ]
The mass electrifications in the eighties reduced the radius of action of both the Class 352 and Class 353, operating primarily in the axes Badajoz / Lisbon, Granada / Almería, Murcia / Cartagena and direct corridor from Madrid to Burgos.
The standard gauge bogies found a use unexpected at the time of the locomotives inception – in 1991 was used to tow a Talgo Pendular train on the high speed Madrid to Seville AVE line.
The class was retired on 25 September 2003. The 353-005-2 is preserved in working condition at the museum of Vilanova.
| Original number | UIC number | Name [3] | Manufacturer | manufacturers number | Introduction | Withdrawal | Kilometres travelled |
|---|---|---|---|---|---|---|---|
| 3001 T | 353-001-1 | "Virgen de Lourdes" | Krauss-Maffei | 19449 | 1968 | 9 March 2003 | 5913610 |
| 3002 T | 353-002-9 | "Virgen de Fatima" | 19450 | 1968 | 5 August 2001 | 5765725 | |
| 3003 T | 353-003-7 | "Virgen del Yugo" | 19451 | 1968 | 25 September 1990 | 4385799 | |
| 3004 T | 353-004-5 | "Virgen de la Paloma" | 19452 | 1969 | 9 February 1983 | 2894871 | |
| 3005 T | 353-005-2 | "Virgen de la Bien Aparecida" | 19453 | 1969 | 25 September 2003 | 6041510 |
The British Rail Class 52 is a class of 74 Type 4 diesel-hydraulic locomotives built for the Western Region of British Railways between 1961 and 1964. All were given two-word names, the first word being "Western" and thus the type became known as Westerns. They were also known as Wizzos and Thousands. The final Class 52 locomotives were withdrawn from service in 1977.
Talgo is a Spanish manufacturer of intercity, standard, and high-speed passenger trains. Talgo is an abbreviation of Tren Articulado Ligero Goicoechea Oriol.
The British Rail Class 42 Warship diesel-hydraulic locomotives were introduced in 1958. It was apparent at that time that the largest centre of expertise on diesel-hydraulic locomotives was in West Germany. The Western Region of British Railways negotiated a licence with German manufacturers to scale down the German Federal Railway's "V200" design to suit the smaller loading gauge of the British network, and to allow British manufacturers to construct the new locomotives. The resultant design bears a close resemblance, both cosmetically and in the engineering employed, to the original V200 design. Warship locomotives were divided into two batches: those built at BR's Swindon works were numbered in the series D800-D832 and D866-D870, had a maximum tractive effort of 52,400 pounds-force (233,000 N) and eventually became British Rail Class 42. 33 others, D833–D865, were constructed by the North British Locomotive Company and became British Rail Class 43. They were allocated to Bristol Bath Road, Plymouth Laira, Newton Abbot and Old Oak Common.
DB Class V 200 was the first series production diesel-hydraulic express locomotive of the German Deutsche Bundesbahn and – as Am 4/4 – of the SBB-CFF-FFS in Switzerland.
The Renfe Class 100 is a high-speed train used for AVE services by the Renfe Operadora, in Spain. It was the first high-speed train put into service in Spain, in 1992.
The Class V 160 is a class of diesel-hydraulic locomotives of the German railways. It is the first variant of the V160 family, built for the Deutsche Bundesbahn for medium/heavy trains.
The Renfe 334 is a high speed, 4 axle diesel-electric locomotive built to haul passenger trains on Renfe's Talgo service on non electrified lines.
The Renfe Series 333 are high power six-axle diesel-electric locomotives built in the 1970s; at the time of their introduction they were the most powerful non-electric locomotives in Spain.
The diesel-hydraulic locomotive ML 2200 C'C' was a 6 axle variant of the DB Class V 200 series of locomotives, which were built for Yugoslav State Railways (JDŽ) by manufacturer Krauss-Maffei.
The Class 340 of Renfe were a class of 4-axle diesel-hydraulic locomotives built by Krauss-Maffei for the Spanish Railways. The design is similar in outward appearance and technology to the DB Class V 200. 32 units were built.
The Renfe Class 352 was a class of twin engined four axle diesel-hydraulic locomotives built by Krauss-Maffei, designed solely for passenger traffic; in particular they were responsible for towing Andalusian Talgo III trains. The class were very successful, heralding a new era of passenger trains in Spain. They were delivered in 1964 and 1965, and were fully withdrawn during the 1990s.
The Renfe Class 354 was a series of eight diesel hydraulic locomotives manufactured by Krauss-Maffei in Germany specifically to pull Talgo pendular coaches which were introduced shortly before the acquisition of these machines.
The Renfe Class 350 is a series of four single-cabin diesel locomotives that were delivered to Spain in 1950 for use with Talgo II coaches, being built in the United States by the American Car & Foundry to a distinctly American external style.
The Renfe Class 130 or S-130 is a high-speed dual-gauge, dual-voltage trainset consisting of 11 Talgo VII tilting coaches and two power cars, used on Alvia and Euromed services. The class have been nicknamed patitos (ducklings), due to the shape of the train nose.
The Renfe Class 252 are a series of Bo'Bo' electric locomotives, built by CAF, Meinfesa, Siemens and Krauss-Maffei for RENFE. 15 units were built for the AVE Madrid–Seville high speed line in, and 60 units constructed for general use to Iberian gauge (1668mm).
The Renfe classes 319.2, 319.3 and 319.4 are six axle Co'Co' medium power mainline diesel-electric locomotives manufactured by Macosa using General Motors Electromotive division components under license.
Trenhotel was a long distance, overnight train service which used Talgo tilting trains and sleeping cars developed by the Spanish rail network operator Renfe. It was operated by Renfe within Spain, and by its subsidiary Elipsos across France, Switzerland and Italy.
The Catalan Talgo was an international express train that linked Geneva, Switzerland, with Barcelona, Spain from 1969 to 2010. It was named after the Spanish region Catalonia and the Talgo equipment it used. It was an extension and upgrading of a predecessor train, Le Catalan, a first-class-only French (SNCF) Rapide train that had been in operation since 1955 but running only between Geneva and the stations nearest the Spanish-French border, connecting with a second-class-only "autorail" trainset to and from Barcelona. The national railway network of Spain, Red Nacional de los Ferrocarriles Españoles (RENFE), was using Iberian gauge for all of its main lines, while those of France and Switzerland use standard gauge. As a result of this break-of-gauge, train journeys between Geneva and Barcelona consisted of two separate parts, with travelers having to change from a French to a Spanish train or vice versa at the border—at Portbou on southbound trains and at Cerbère on northbound trains. In 1968, this was resolved with the introduction of the Talgo III RD trainsets, which featured variable gauge wheelsets. At Portbou station, the wheel spacing of each passenger carriage was adjusted by a gauge changer for the difference in gauge, and passengers no longer had to change trains. After successful test runs, the Catalan was extended from Port Bou to Barcelona as a through train on 1 June 1969, becoming the Catalan Talgo and upgraded to a Trans Europ Express (TEE). Most other rail journeys through this border crossing continued to require a change of train at Cerbère station or at Port Bou, as most trains did not use Talgo III RD trainsets.
The Renfe Class 730 or S-730 is a high-speed dual-gauge, dual-voltage and hybrid trainset consisting of 9 Talgo VII tilting coaches, two intermediate diesel-generator cars and two head electric power cars, used on Alvia services. The class have been nicknamed patitos, due to the shape of the train nose. They are a variant of RENFE Class 130 modified to be able to run on both electric and diesel power, in order to extend higher-quality services to parts of Spain not on the electrified network.
The Yorkshire Engine Company Taurus and Indus locomotives were two very similar lines of 0-8-0, diesel-hydraulic locomotives that weighed 58 tons and had a maximum speed of 36 mph (58 km/h). The two Rolls-Royce C8SFL diesel engines gave a total of 600 hp (450 kW). The transmission of the Taurus locomotives worked on a similar principle to that of the Fell diesel tested during the early 1950s. In this case at low speeds only one engine was used, the second being engaged between 3.5 mph (5.6 km/h) and 15 mph (24 km/h) to enable haulage of 300 - 500 ton loads at speeds of up to 36 mph. The maximum speed with one engine was 12 mph (19 km/h) while the minimum speed with both engines was 3.5 mph. Both engines drove to a common torque converter and used a common throttle control with a separate lever being provided to engage the second engine as the need arose.
| Lines in service |  | ||||
|---|---|---|---|---|---|
| Lines under construction | |||||
| Planned lines | |||||
| Rolling stock | |||||
| Services |
| ||||