Saint-Laurent Railway Bridge

Last updated
Saint-Laurent Railway Bridge
Pont Saint-Laurent (LaSalle).jpg
The Saint-Laurent Railway Bridge as seen from the Monette-Lafleur bus terminal.
Coordinates 45°25′8″N73°39′34″W / 45.41889°N 73.65944°W / 45.41889; -73.65944 Coordinates: 45°25′8″N73°39′34″W / 45.41889°N 73.65944°W / 45.41889; -73.65944
Carries Canadian Pacific Railway, RTM
Crosses St. Lawrence River
and the Saint Lawrence Seaway
Locale Kahnawake, Quebec and Montreal, Quebec
Official namenone
Characteristics
Design2 Truss bridges, includes twin lift Bridges
Rail characteristics
No. of tracks 2, (1 per parallel spans)
Track gauge 4 ft 8+12 in (1,435 mm) standard gauge
Structure gauge AAR
Location
Saint-Laurent Railway Bridge

The Saint-Laurent Railway Bridge is a Canadian Pacific railway bridge linking LaSalle to the Kahnawake Mohawk Reserve, just upstream of the Mercier Bridge. It is used by the RTM Candiac commuter train.

Contents

History of the bridge

Two bridges have crossed the river at this location. The first bridge, erected in 1885–1887, was of all-steel construction that employed a flying cantilever design to cross the main channel. It carried a single track and was opened for passenger service at the end of July, 1887.

The second structure, the one standing today, was constructed between 1910 and 1913 and was completed by November 13, 1913. To build the bridge, the free ends of the main spans were floated across the water on a barge. [1] Construction of the new bridge was completed while keeping the old bridge in service. Extra piers were added and the design changed significantly.

Construction of the Saint Lawrence Seaway required the construction of twin vertical lift bridges replacing the existing fixed spans. This section has two elevator winches (functioning as a drawbridge) able to lift the section up to 70 feet (21 metres) above the initial level, in order to allow ships to pass.

See also

Related Research Articles

<span class="mw-page-title-main">Welland Canal</span> Ship canal in Ontario, Canada, connecting Lake Ontario and Lake Erie

The Welland Canal is a ship canal in Ontario, Canada, connecting Lake Ontario and Lake Erie. It forms a key section of the St. Lawrence Seaway and Great Lakes Waterway. Traversing the Niagara Peninsula from Port Weller in St. Catharines to Port Colborne, it enables ships to ascend and descend the Niagara Escarpment and bypass Niagara Falls. It is the fourth canal connecting these waterways; three smaller predecessors also bore the same name.

<span class="mw-page-title-main">Victoria Bridge (Montreal)</span> Bridge over the St. Lawrence River in Montreal, Quebec

The Victoria Bridge, previously known as Victoria Jubilee Bridge, is a bridge over the St. Lawrence River, linking Montreal, Quebec, to the south shore city of Saint-Lambert.

<span class="mw-page-title-main">Second Narrows Rail Bridge</span> Vertical-lift railway bridge in Metro Vancouver, Canada

The Second Narrows Rail Bridge is a vertical-lift railway bridge that crosses the Burrard Inlet and connects Vancouver with the North Shore. The bridge's south end connects directly to the Thornton Tunnel, which connects it to the main Canadian rail network. As the name suggests, it is located at the second narrowing of the Burrard Inlet.

<span class="mw-page-title-main">Burlington Northern Railroad Bridge 5.1</span> Railroad bridge in Portland, Oregon

The Burlington Northern Railroad Bridge 5.1 or BNSF Railway Bridge 5.1, also known as the St. Johns Railroad Bridge or the Willamette River Railroad Bridge, is a through truss railway bridge with a vertical lift that spans the Willamette River in Portland, Oregon, United States. Built by the Spokane, Portland and Seattle Railway (SP&S) and completed in 1908, it was originally a swing-span bridge, and its swing-span section was the longest in the world at the time. However, 81 years later the main span was converted from a swing-type to a vertical-lift type, in order to widen the navigation channel. The lift span is one of the highest and longest in the world. The bridge consists of five sections, with the two sections closest to the bank on each side fixed.

<span class="mw-page-title-main">International Railway of Maine</span>

The International Railway of Maine was a historic railroad constructed by the Canadian Pacific Railway (CPR) between Lac-Mégantic, Quebec, and Mattawamkeag, Maine, closing a key gap in the railway's transcontinental main line to the port of Saint John, New Brunswick.

<span class="mw-page-title-main">Bridgewater Bridge (Tasmania)</span> Road and rail bridge in Tasmania, Australia

The Bridgewater Bridge is a road and rail bridge that carries the Midland Highway and South Railway Line across the Derwent River in Hobart, Tasmania, Australia. The steel truss vertical lift bridge and specially-built causeway connect the Hobart suburbs of Bridgewater and Granton. The bridge was completed in 1946 and accommodates a two-lane highway, a single track railway and a grade-separated footpath.

<span class="mw-page-title-main">Chepstow Railway Bridge</span> Bridge spanning the River Wye between England and Wales

Chepstow Railway Bridge was built to the instructions of Isambard Kingdom Brunel in 1852. The "Great Tubular Bridge" over the River Wye at Chepstow, which at that point forms the boundary between Wales and England, is considered one of Brunel's major achievements, despite its appearance. It was economical in its use of materials, and would prove to be the design prototype for Brunel's Royal Albert Bridge at Saltash. Although the superstructure has since been replaced, Brunel's tubular iron supports are still in place. It is a Grade II listed structure.

<span class="mw-page-title-main">Ryde Bridge</span> Bridges across the Parramatta River in Sydney, Australia

The Ryde Bridge(s), also called the Uhrs Point Bridge, are two road bridges that carry Concord Road, part of the A3, across Parramatta River from Ryde in the northern suburbs of Sydney to Rhodes in Sydney's inner west, in New South Wales, Australia.

<span class="mw-page-title-main">Honoré Mercier Bridge</span> Bridge in Quebec and Montreal, Quebec

The Honoré Mercier Bridge in Quebec, Canada, connects the Montreal borough of LaSalle on the Island of Montreal with the Mohawk reserve of Kahnawake, Quebec and the suburb of Châteauguay on the south shore of the Saint Lawrence River. It is the most direct southerly route from the island of Montreal toward the US border. It carries Route 138, originally Route 4. It is 1.361 km (0.846 mi) in length and contains four steel trusses on its first section. The height of the bridge varies from 12.44 m (40.8 ft) to 33.38 m (109.5 ft) with the highest sections located over the St. Lawrence Seaway. The bridge is named after former premier of Quebec Honoré Mercier.

The New York and Ottawa Railway was a railway connecting Tupper Lake in northeastern New York to Ottawa, Ontario, via Ramsayville, Russell, Embrun, Finch and Cornwall. It became part of the New York Central Railroad system in 1913, although it was under the larger company's possession since the end of 1904. It had started-out as the Northern Adirondack Railroad and evolved into the Northern New York Railroad, the New York and Ottawa Railroad, and was last known as the New York and Ottawa Railway before being merged into the New York Central and Hudson River Railroad. Other lines that were a part of this route are described below.

<span class="mw-page-title-main">Finland Railway Bridge</span> Bridge in Saint Petersburg

The Finland Railway Bridge is a pair of parallel rail bridges across the Neva River in Saint Petersburg, Russia. The movable bridges are connecting the Riihimäki–Saint Petersburg Railway and other railway networks in the north of St Petersburg with those in the south of St Petersburg. The same singular name is applied to both of the bridges.

<span class="mw-page-title-main">Kingsferry Bridge</span> Road-rail bridge in Kent, England

The Kingsferry Bridge is a combined road and railway vertical-lift bridge which connects the Isle of Sheppey to mainland Kent in South East England. The seven-span bridge has a central lifting span which allows ships to pass.

<span class="mw-page-title-main">Fredericton Railway Bridge</span> Bridge in Fredericton, New Brunswick, Canada

The Fredericton Railway Bridge is a former railway bridge in Fredericton, New Brunswick, Canada now used to carry pedestrians and cyclists.

<span class="mw-page-title-main">Skytrail</span> Bridge in Saskatchewan, Canada

The SkyTrail Bridge spans the South Saskatchewan River in Outlook, Saskatchewan, Canada. It was originally built by the Canadian Pacific Railway over the full width of the river's flood channel and has eight spans. It served as a railway bridge from October 23, 1912, until March 16, 1987. In 2003 it was converted to a pedestrian bridge and is now the longest pedestrian bridge in Canada. The bridge is part of the Trans-Canada Trail. Due to structural issues, the bridge has been closed since late 2013.

<span class="mw-page-title-main">Canal Street railroad bridge</span> Bridge in Chicago

The Canal Street railroad bridge is a vertical-lift bridge across the south branch of the Chicago River in Chicago, Illinois. It was designated a Chicago Landmark on December 12, 2007.

<span class="mw-page-title-main">Bremer River Rail Bridge</span> Railway bridge in City of Ipswich Queensland in Australia

Bremer River Rail Bridge is a heritage-listed railway bridge at off Bremer Street, North Ipswich, City of Ipswich, Queensland, Australia. It was built from 1865 to 1915. It was added to the Queensland Heritage Register on 11 December 2006.

<span class="mw-page-title-main">Murray River railway bridge, Albury–Wodonga</span> Bridge in New South Wales, Australia

The Murray River railway bridge is a heritage-listed Australian railway bridge over the Murray River on the Main Southern line south of Albury in the City of Albury, New South Wales, and on the North Eastern line north of Wodonga in Victoria. The bridge was designed by John Whitton and built from 1883 to 1884 by J. S. Bennett, with iron work supplied by Westwood, Baillie, England. It is also known as the Rail Bridge over Murray River, Albury-Wodonga and the Albury Lattice Railway Bridge and Murray River Underbridge. The bridge is owned by RailCorp, and maintained by the Australian Rail Track Corporation as part of its lease of the line. It was added to the New South Wales State Heritage Register on 2 April 1999 and added to the Register of the National Estate on 18 April 1989.

<span class="mw-page-title-main">Champlain Bridge (Montreal, 2019–present)</span> Bridge over the Saint Lawrence River in Montreal, Quebec

The Samuel De Champlain Bridge, colloquially known as the Champlain Bridge, is a cable-stayed bridge design by architect Poul Ove Jensen and built to replace the original Champlain Bridge over the Saint Lawrence River in Quebec, between Nuns' Island in the borough of Verdun in Montreal and the suburban city of Brossard on the South Shore. A second, connected bridge links Nuns' Island to the main Island of Montreal.

References

  1. Werry, S.D. (1997). "Rails across the river: the story of the St. Lawrence Bridge (1881-1915)". Can. J. Civ. Eng. NRC Research Press. 24 (3): 480–488. doi:10.1139/l96-131.