Sharp EL-8

Last updated
Sharp EL-8
Sharp EL-8.JPG
Sharp EL-8 of 1971
Manufacturer Sharp
Introduced1970 or 1971
Predecessor QT-8D, QT-8B
CostJP¥84,800, US$345
Calculator
Display type8-digit vacuum fluorescent display
Other
Power supply6 Ni–Cd AA batteries (450 mAh in total) or AC adapter
Power consumption~1W
Weight0.72 kg
Dimensions164 × 102 × 70 mm
Sharp EL-8 of December 1970 Sharp EL-8 The First Portable Electronic Calculator.jpg
Sharp EL-8 of December 1970

The Sharp EL-8, also known as the ELSI-8, [1] was one of the earliest mass-produced hand-held electronic calculators [1] and the first hand-held calculator to be made by Sharp. Introduced around the start of 1971, [note 1] it was based on Sharp's preceding QT-8D and QT-8B compact desktop calculators and used the same logic circuits, but it was redesigned to fit in a much smaller case.

Contents

Most electronic calculators before the EL-8 were intended for desktop use. [2] Sharp's predecessor to the EL-8, the battery-powered QT-8B, was just a portable version of a compact desk calculator. [1] The EL-8 was much smaller, small enough to be used in one's hand: 164 mm (6.46 in) long, 102 mm (4.02 in) wide, and 70 mm (2.76 in) thick, and weighing 0.72 kg (1.59 lb) with batteries. [6] Although it was still too bulky to easily fit in a pocket, [1] it was an important step toward the development of the pocket calculator. [2]

Ad showing the calculator's original price. Sharp ELSI-8 commercial.jpg
Ad showing the calculator's original price.

The EL-8's original price in Japan was 84,800 Japanese yen. [3] The retail price in 1971 was US$345 (equivalent to US$2,308in 2021). [1] [7]

The operation and performance of the EL-8 are identical to its predecessor calculators, the QT-8D and QT-8B, because its logic circuits use the same set of four Rockwell-manufactured large-scale integrated circuits. [1] [2] [8] Likewise, its keyboard has the same layout, including the combined ×÷ key, [1] [2] and it also uses magnetic reed switches. [9]

The display, like that of the QT-8D, is an 8-digit vacuum fluorescent display with nine individual tubes: eight digit tubes and a single extra tube for the minus sign and overflow indicator. As with the QT-8D, the tubes are Iseden "itron" tubes [note 2] with the same distinctive "handwritten" digit style and the same half-height "0". However, unlike the QT-8D, the EL-8 digit tubes only have eight segments to form digits, and the EL-8's extra tube is positioned at the top right corner of the display instead of at its right end. A separate lamp serves as a power indicator. [1] [2] [9]

Itron DG10L Vacuum-Fluorescent Display Tube Sharp EL-8 Itron vacuum-fluorescent Display Tube.jpg
Itron DG10L Vacuum-Fluorescent Display Tube

Power is supplied by an integrated rechargeable battery pack or by an external battery charger, which also serves as an AC adapter to allow the calculator to operate from AC power. [2] The battery pack (model EL-84) [9] contains six nickel-cadmium AA batteries connected in series, giving a total voltage of 7.2  volts [1] and, with the original batteries, a total capacity of 450  mAh . [6] (Present-day nickel-cadmium AA batteries have much greater capacity.) Battery life with the original batteries is about three hours, [1] which gives an average power usage of about one watt. The battery charger (model EL-81) supplies power to the calculator's charging input at voltages of 8.7 and 9.6  volts ; [9] the combined input power rating is about 3.2 watts. [10]

Sharp NR-AA Rechargeable Battery Sharp NR-AA Re-chargeable Battery.jpg
Sharp NR-AA Rechargeable Battery

The EL-8's battery pack is much smaller than that of the QT-8B, and this was critical in reducing the EL-8's size and weight. However, these smaller batteries have much less capacity, and in order to maintain reasonable battery life, power usage had to be drastically cut. This was done by various improvements in the electronics, especially in the display. The QT-8B's display tubes are driven by discrete transistors; to reduce the number of transistors needed, only one tube is lit at a time, and the circuitry cycles through the tubes in rapid sequence. The rapid switching from tube to tube requires load resistors which absorb a lot of power. In the EL-8, the display tubes are driven by integrated circuits containing multiple transistors, and all of the tubes are kept lit constantly. No switching is required and no load resistors are needed, so much less power is used. Furthermore, because each tube in the QT-8B is only lit for a fraction of the time, the tubes need a high momentary brightness in order to get a reasonable average brightness, so they must be driven with a high voltage, requiring a separate high-voltage power supply. Since the EL-8 tubes are kept constantly lit, they don't have to be as bright, so the driving voltage can be lower and a separate high-voltage supply is not needed. In addition to the display improvements, the EL-8 also has a more efficient clock generator circuit for its logic than the QT-8B. Together, these changes reduced the EL-8's power usage to less than a third of that of the QT-8B. [6]

Sharp also produced a version of the EL-8 without batteries called the EL-8A. This was offered at a lower price, about US$300 (equivalent to US$2,007in 2021). [7] Since this version lacks batteries, it is somewhat lighter and requires an AC adapter for power. The power connector is also slightly different, having an extra contact. [11]

In addition to its own EL-8 and EL-8A, Sharp also built OEM versions of the EL-8 for the Swedish office machine company Facit and its subsidiary Addo, which sold them as the Facit 1111 and the Addo-X 9364. These have the same internals as the EL-8, but the case and keycaps are different. [1] [12]

Notes

  1. ↑ Some sources claim the EL-8's introduction was in January 1971, [2] [3] others claim it was in November 1970. [4] [5]
  2. ↑ "Iseden" is an abbreviation for the manufacturer's full name, Ise Denshi Kōgyō Kabushiki Kaisha (伊勢電子工業株式会社, "Ise Electronics Industry Stock Company"), known in English as Ise Electronics Corporation.

Related Research Articles

<span class="mw-page-title-main">Calculator</span> Electronic device used for calculations

An electronic calculator is typically a portable electronic device used to perform calculations, ranging from basic arithmetic to complex mathematics.

<span class="mw-page-title-main">Electronics</span> Branch of physics and electrical engineering

Electronics is a scientific and engineering discipline that studies and applies the principles of physics to design, create, and operate devices that manipulate electrons and other electrically charged particles. Electronics is a subfield of electrical engineering, but it differs from it in that it focuses on using active devices such as transistors, diodes, and integrated circuits to control and amplify the flow of electric current and to convert it from one form to another, such as from alternating current (AC) to direct current (DC) or from analog to digital. Electronics also encompasses the fields of microelectronics, nanoelectronics, optoelectronics, and quantum electronics, which deal with the fabrication and application of electronic devices at microscopic, nanoscopic, optical, and quantum scales.

<span class="mw-page-title-main">Nixie tube</span> Electronic numeric display device

A Nixie tube, or cold cathode display, is an electronic device used for displaying numerals or other information using glow discharge.

<span class="mw-page-title-main">Sumlock ANITA calculator</span>

The ANITA Mark VII and ANITA Mark VIII calculators were launched simultaneously in late 1961 as the world's first all-electronic desktop calculators. Designed and built by the Bell Punch Co. in Britain, and marketed through its Sumlock Comptometer division, they used vacuum tubes and cold-cathode switching tubes in their logic circuits and nixie tubes for their numerical displays.

<span class="mw-page-title-main">Vacuum fluorescent display</span> Display used in consumer electronics

A vacuum fluorescent display (VFD) is a display device once commonly used on consumer electronics equipment such as video cassette recorders, car radios, and microwave ovens.

<span class="mw-page-title-main">Speak & Spell (toy)</span> Electronic toy made by Texas Instruments

The Speak & Spell line is a series of electronic hand-held child computers by Texas Instruments that consisted of a TMC0280 linear predictive coding speech synthesizer, a keyboard, and a receptor slot to receive one of a collection of ROM game library modules. The first Speak & Spell was introduced at the summer Consumer Electronics Show in June 1978, making it one of the earliest handheld electronic devices with a visual display to use interchangeable game cartridges. The company Basic Fun brought back the classic Speak & Spell in 2019 with some minor changes.

<span class="mw-page-title-main">TI-30</span> Scientific calculator by Texas Instruments

The TI-30 is a scientific calculator manufactured by Texas Instruments, the first model of which was introduced in 1976. While the original TI-30 was discontinued in 1983 after several design revisions, TI maintains the TI-30 designation as a branding for its low and mid-range scientific calculators.

Engineering notation or engineering form (also technical notation) is a version of scientific notation in which the exponent of ten is always selected to be divisible by three to match the common metric prefixes, i.e. scientific notation that aligns with powers of a thousand, for example, 531×103 instead of 5.31×105 (but on calculator displays written without the ×10 to save space). As an alternative to writing powers of 10, SI prefixes can be used, which also usually provide steps of a factor of a thousand. On most calculators, engineering notation is called "ENG" mode as scientific notation is denoted SCI.

<span class="mw-page-title-main">Sinclair Sovereign</span> Calculator produced by Sinclair Radionics

The Sinclair Sovereign was a high-end calculator introduced by Clive Sinclair's company Sinclair Radionics in 1976. It was an attempt to escape from the unprofitable low end of the market, and one of the last calculators Sinclair produced. Made with a case of pressed steel that a variety of finishes, it cost between £30 and £60 at a time when other calculators could be purchased for under £5. A number of factors meant that the Sovereign was not a commercial success, including the cost, high import levies on components, competition from cheaper calculators manufactured abroad, and the development of more power-efficient designs using liquid-crystal displays. Though it came with a five-year guarantee, issues such as short battery life limited its usefulness. The company moved on to producing computers soon afterwards.

<span class="mw-page-title-main">Electronic circuit</span> Electrical circuit with active components

An electronic circuit is composed of individual electronic components, such as resistors, transistors, capacitors, inductors and diodes, connected by conductive wires or traces through which electric current can flow. It is a type of electrical circuit. For a circuit to be referred to as electronic, rather than electrical, generally at least one active component must be present. The combination of components and wires allows various simple and complex operations to be performed: signals can be amplified, computations can be performed, and data can be moved from one place to another.

<span class="mw-page-title-main">CircuitLogix</span> Electronic circuit simulator software

CircuitLogix is a software electronic circuit simulator which uses PSpice to simulate thousands of electronic devices, models, and circuits. CircuitLogix supports analog, digital, and mixed-signal circuits, and its SPICE simulation gives accurate real-world results. The graphic user interface allows students to quickly and easily draw, modify and combine analog and digital circuit diagrams. CircuitLogix was first launched in 2005, and its popularity has grown quickly since that time. In 2012, it reached the milestone of 250,000 licensed users, and became the first electronics simulation product to have a global installed base of a quarter-million customers in over 100 countries.

Four-phase logic is a type of, and design methodology for dynamic logic. It enabled non-specialist engineers to design quite complex ICs, using either PMOS or NMOS processes. It uses a kind of 4-phase clock signal.

<span class="mw-page-title-main">PMOS logic</span> Family of digital circuits

PMOS or pMOS logic is a family of digital circuits based on p-channel, enhancement mode metal–oxide–semiconductor field-effect transistors (MOSFETs). In the late 1960s and early 1970s, PMOS logic was the dominant semiconductor technology for large-scale integrated circuits before being superseded by NMOS and CMOS devices.

A transistor is a semiconductor device with at least three terminals for connection to an electric circuit. In the common case, the third terminal controls the flow of current between the other two terminals. This can be used for amplification, as in the case of a radio receiver, or for rapid switching, as in the case of digital circuits. The transistor replaced the vacuum-tube triode, also called a (thermionic) valve, which was much larger in size and used significantly more power to operate. The first transistor was successfully demonstrated on December 23, 1947, at Bell Laboratories in Murray Hill, New Jersey. Bell Labs was the research arm of American Telephone and Telegraph (AT&T). The three individuals credited with the invention of the transistor were William Shockley, John Bardeen and Walter Brattain. The introduction of the transistor is often considered one of the most important inventions in history.

Low-power electronics are electronics, such as notebook processors, that have been designed to use less electric power than usual, often at some expense. In the case of notebook processors, this expense is processing power; notebook processors usually consume less power than their desktop counterparts, at the expense of lower processing power.

<span class="mw-page-title-main">Sharp QT-8D</span>

The Sharp QT-8D Micro Compet, a small electronic desktop calculator, was the first mass-produced calculator to have its logic circuitry entirely implemented with LSI integrated circuits (ICs) based on MOS (metal-oxide-semiconductor) technology. When it was introduced in late 1969, it was one of the smallest electronic calculators ever produced commercially. Previous electronic calculators had been about the size of a typewriter and had logic circuits built from numerous discrete transistors and diodes or small- to medium-scale ICs. The QT-8D's logic circuits were packed into just four LSI ICs.

The Sharp QT-8B Micro Compet, a portable electronic desktop calculator, was the first mass-produced calculator to be battery-powered. Introduced in mid-1970, it was based on its immediate predecessor, the QT-8D introduced in late 1969, but it replaced the QT-8D's integrated power supply with a rechargeable battery pack. It has the same calculating integrated circuits as the QT-8D and is of similar appearance and dimensions; the power supply is the only major difference.

<span class="mw-page-title-main">Solar-powered calculator</span> Calculators powered by built-in solar cells

Solar-powered calculators are hand-held electronic calculators powered by solar cells mounted on the device. They were introduced at the end of the 1970s.

<span class="mw-page-title-main">Victor 3900</span> 1965 electronic calculator

The Victor 3900 is the first electronic calculator to have been built entirely of integrated circuits (ICs). For its era, the 3900 is extremely advanced; it has a 4-inch (100 mm) cathode ray tube screen to produce a 5-line display, has separate memory for storing three intermediate results, supports numerical rounding, and is still "smaller than a typewriter".

References

  1. 1 2 3 4 5 6 7 8 9 10 11 Nigel Tout. "Sharp EL-8, Facit 1111, & Addo-X 9364". Vintage Calculators Web Museum. Retrieved October 7, 2010.
  2. 1 2 3 4 5 6 7 Rick Bensene. "Sharp EL-8 'Handheld' Electronic Calculator". The Old Calculator Web Museum. Retrieved October 8, 2010.
  3. 1 2 Shinichiro Osaki. "シャープ EL シリーズ （ポケット蛍光管 タイプ）: EL-8" [Sharp EL series (pocket fluorescent-tube type): EL-8]. Dentaku Museum (in Japanese). Retrieved October 8, 2010.
    "In January 1971, a small, portable electronic calculator was released....The price at that time was 84,800 yen. (1971年1月に発売された小型、携帯型電卓。...当時の価格 84,800円。, 1971 nen 1 gatsu ni hatsubai sareta kogata, keitaigata dentaku....Touji no kakaku 84,800 en.)"
  4. ↑ Joerg Woerner. "Sharp EL-8". Datamath Calculator Museum. Retrieved October 8, 2010.
  5. ↑ John Wolff. "Sharp EL-8 and EL-8M Portable Calculators". John Wolff's Web Museum. Retrieved July 30, 2014.
  6. 1 2 3 "How to cut a pocket calculator in half". Electronics. 44: 120. February 1971. ISSN   0013-5070 . Retrieved October 7, 2010.
    Nigel Tout's EL-8 page includes an extended quote from this article.
  7. 1 2 "CPI Inflation Calculator". Bureau of Labor Statistics . Retrieved October 6, 2010.
  8. ↑ Shirriff, Ken (December 2020). "Reverse-engineering the clock chip in the first MOS calculator".
  9. 1 2 3 4 Alex Knight. "Early Sharp Calculators Internal Photographs". The Calculator Museum Web Page. Retrieved October 8, 2010.
  10. ↑ Fritz Gallwitz. "Sharp EL-8". Rechnerwiki (in German). Retrieved October 6, 2010. (See photo of back panel.)
  11. ↑ Joerg Woerner. "Sharp EL-8A". Datamath Calculator Museum. Retrieved October 9, 2010.
  12. ↑ Rick Bensene. "Facit 1111 'Handheld' Electronic Calculator". The Old Calculator Web Museum. Retrieved October 7, 2010.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.