Siemens-Halske Sh 22

Last updated
Sh 22
Type Radial engine
National origin Germany
Manufacturer Siemens-Halske
First run1930
Developed fromSiemens-Halske Sh.21
Developed into Bramo 323

The Siemens-Halske Sh 22 (also known as SAM 22) was a nine-cylinder aircraft radial engine manufactured by Siemens & Halske in Germany in the 1930s. Following the reorganization of its manufacturer and change in military nomenclature, the engine became known as the Bramo 322.

Contents

It was a result of a series of modifications to the original Bristol Jupiter IV design, which Siemens licensed in 1929. The first modifications were to "Germanize" the dimensions, producing the Sh.20 and Sh.21. The design was then bored out to produce the 950 hp (708 kW) Sh.22 in 1930. Like the Jupiter, the Sh.22 featured a rather "old" looking arrangement with rather prominent valve pushrods on the front of the engine. In the mid-1930s the Reich Air Ministry (RLM) rationalized engine naming, and Bramo was given the 300-block of numbers, the Sh.14 and Sh.22 becoming the Bramo 314 and 322 respectively. The 322 never matured and remained unreliable. It became a base for the more successful Bramo 323.

Applications

Specifications (Bramo 322H-2)

Data fromAviacionnye motory voennykh vozdushnykh sil inostrannykh gosudarstv, [1] Flugzeug-Typenbuch. Handbuch der deutschen Luftfahrt- und Zubehör-Industrie 1944 [2]

General characteristics

506 kg (1,116 lb) wet, equipped

Components

Performance

  • 650 PS (641 hp; 478 kW) at 2,150 rpm (5 minutes) at sea level
  • 585 PS (577 hp; 430 kW) at 2,080 rpm (30 minutes) at sea level
  • 520 PS (513 hp; 382 kW) at 2,000 rpm (max. continuous / cruise) at sea level

Related Research Articles

<span class="mw-page-title-main">Junkers Jumo 211</span> German inverted V-12 aircraft engine

The Jumo 211 was a German inverted V-12 aircraft engine, Junkers Motoren's primary aircraft engine of World War II. It was the direct competitor to the Daimler-Benz DB 601 and closely paralleled its development. While the Daimler-Benz engine was mostly used in single-engined and twin-engined fighters, the Jumo engine was primarily used in bombers such as Junkers' own Ju 87 and Ju 88, and Heinkel's H-series examples of the Heinkel He 111 medium bomber. It was the most-produced German aero engine of the war, with almost 70,000 examples completed.

<span class="mw-page-title-main">Daimler-Benz DB 601</span> German aircraft engine

The Daimler-Benz DB 601 was a German aircraft engine built during World War II. It was a liquid-cooled inverted V12, and powered the Messerschmitt Bf 109, Messerschmitt Bf 110, and many others. Approximately 19,000 601's were produced before it was replaced by the improved Daimler-Benz DB 605 in 1942.

<span class="mw-page-title-main">Bramo 323</span> 1930s German 9-cylinder Radial Aircraft Engine

The Bramo 323 Fafnir is a nine-cylinder radial aircraft engine of the World War II era. Based heavily on Siemens/Bramo's earlier experience producing the Bristol Jupiter under licence, the Bramo 323 saw limited use.

<span class="mw-page-title-main">Daimler-Benz DB 600</span> 1930s German piston aircraft engine

The Daimler-Benz DB 600 was a German aircraft engine designed and built before World War II as part of a new generation of German engine technology. It was a liquid-cooled inverted V12 engine, and powered the Messerschmitt Bf 110 and Heinkel He 111 among others.

<span class="mw-page-title-main">Argus As 10</span> 1920s German piston aircraft engine

The Argus As 10 was a German-designed and built, air-cooled 90° cylinder bank-angle inverted V8 "low power" aircraft engine, used mainly in training aircraft such as the Arado Ar 66 and Focke-Wulf Fw 56 Stösser and other small short-range reconnaissance and communications aircraft like the Fieseler Fi 156 Storch during, and shortly after World War II. It was first built in 1928.

<span class="mw-page-title-main">BMW VI</span>

The BMW VI was a water-cooled V-12 aircraft engine built in Germany in the 1920s. It was one of the most important German aero engines in the years leading up to World War II, with thousands built. It was further developed as the BMW VII and BMW IX, although these saw considerably less use. It was also produced in the Soviet Union as the M-17 and Japan as the Kawasaki Ha-9.

<span class="mw-page-title-main">Siemens-Halske Sh 14</span> Seven-cylinder air-cooled radial engine for aircraft

The Siemens-Halske Sh 14 was a seven-cylinder air-cooled radial engine for aircraft produced in Germany in the 1920s and 1930s. First run in 1928, it was rated at 93 kW (125 hp). It was briefly distributed in the United States by Ryan Aeronautical as the Yankee 7.

<span class="mw-page-title-main">Argus As 8</span> 1930s German piston aircraft engine

The Argus As 8 was a four-cylinder, air-cooled, inverted inline aircraft engine produced in Germany by Argus Motoren in the 1930s.

<span class="mw-page-title-main">Hirth HM 508</span> 1930s German 8-cylinder inverted-V aircraft engine

The Hirth HM 508 was an air-cooled, eight-cylinder, 60° cylinder bank angle inverted-V aircraft engine built in Germany in the 1930s. It had a bore and stroke of 105 mm × 115 mm and developed 210 kW (280 hp) at 3,000 rpm.

<span class="mw-page-title-main">Hirth HM 504</span> 1930s German aircraft engine

The Hirth HM 504 is a four-cylinder air-cooled inverted inline engine. The HM 504 was a popular engine for light aircraft of the 1930s-1940s, and it was used to power a number of Germany's trainer aircraft of World War II. The engine featured a cast magnesium alloy crankcase made of Elektron The Hitachi Hatsukaze Model 11 was a Japanese licensed version.

<span class="mw-page-title-main">Argus As 410</span> 1930s German piston aircraft engine

The Argus As 410 was a German air-cooled inverted V-12 aircraft engine that was first produced by Argus Motoren in 1938.

The Hirth HM 506 was a six-cylinder air-cooled inverted inline engine that was developed from the earlier four-cylinder HM 504. The HM 506 was a popular engine for light aircraft of the 1930s to 1940s and powered the Bücker Bü 133A model trainer. The engine featured a cast magnesium alloy crankcase.

<span class="mw-page-title-main">Hirth HM 60</span> 1920s German aircraft engine

The Hirth HM 60 was a four-cylinder inverted air-cooled inline aircraft engine designed in 1923 and first sold in 1924. The engine was of very high quality, and its sales success contributed to Hirth's rapid pre-war expansion. It was a popular engine for light aircraft delivering 80 hp (60 kW) at 2,300 rpm. Later Hirth engines built upon the HM 60's success and provided greater power with many of the same design features.

<span class="mw-page-title-main">BMW X (engine)</span> 1920s German aircraft piston engine

The BMW X is a small five-cylinder radial engine for sport and training aircraft. Although this engine proved successful at several large-scale events in 1930, including that year's round-Europe flight, only a few were built.

<span class="mw-page-title-main">Daimler-Benz DB 602</span> 1930s German piston airship engine

The Daimler-Benz DB 602, originally known as Daimler-Benz LOF.6, was a German diesel cycle aero engine designed and built in the early 1930s. It was a liquid-cooled upright V16, and powered the two Hindenburg-class airships. It has roughly the same displacement and weight of the Beardmore Tornado, which was used in the ill-fated R101, but has almost twice the power of the Tornado, showing Daimler-Benz's superior knowledge regarding diesel engine construction.

The Hirth HM 512 was a 12-cylinder development of the earlier, 6-cylinder HM 506, produced in the late 1930s. Both were supercharged, inverted V, air-cooled engines.

<span class="mw-page-title-main">Zündapp 9-092</span>

The Zündapp 9–092 or Z 92 was a German four-cylinder, air-cooled, inline aero engine made by Zündapp and used in light aircraft of the late-1930s.

The Hirth HM 501 was a 6-cylinder air-cooled inverted in-line engine that was developed by Hirth Motoren GmbH in the late 1930s, from the 4-cylinder HM 500 and used principally on the submarine-born Arado Ar 231.

The Hirth HM 515 was a four-cylinder air-cooled inverted inline engine, intended to power light aircraft of the 1940s. Due to World War II, demand for the light aircraft to be powered by the HM 515 dried up and only the Siebel Si 202C Hummel was powered by development engines before further work was abandoned.

The Kroeber M4 Köller was a 2-stroke air-cooled horizontally-opposed piston engine designed and built by Dr. Kroeber & Sohn G.m.b.H. in Germany in the late 1930s. The M4 proved relatively popular, for powering the ultra-light aircraft and motor-gliders in vogue during the 1920s and 1930s.

References

  1. Tsygulev (1939). Aviacionnye motory voennykh vozdushnykh sil inostrannykh gosudarstv (Авиационные моторы военных воздушных сил иностранных государств) (in Russian). Moscow: Gosudarstvennoe voennoe izdatelstvo Narkomata Oborony Soyuza SSR. Archived from the original on 2009-03-24.
  2. Schneider, Helmut (Dipl.Ing.) (1944). Flugzeug-Typenbuch. Handbuch der deutschen Luftfahrt- und Zubehör-Industrie 1944 (in German) (Facsimile reprint 1986 ed.). Leipzig: Herm. Beyer Verlag. p. 377. ISBN   381120484X.