Siemens-Schuckert R.VIII | |
---|---|
Role | Bomber |
National origin | Germany |
Manufacturer | Siemens-Schuckert (Siemens-Schuckert Werke G.m.b.H., Siemensstadt. Berlin) [1] |
Number built | 2 (one unfinished) [1] |
The Siemens-Schuckert R.VIII was a bomber aircraft designed and built in Germany from 1916. [1]
Having built the Steffen R series, Siemens-Schuckert planned to produce a six-engined Riesenflugzeug (giant aeroplane) for the Fliegertruppen des deutschen Kaiserreiches (Imperial German Flying Corps). In common with many of the other contemporary R projects, the R.VIII had all six engines inside the fuselage, where they were tended by mechanics, driving two tractor and two pusher propellers mounted between the mainplanes, via leather cone clutches combining gearboxes, shafts and bevel gearboxes. Two aircraft were built but only the first, R23/16, was completed.
Ground trials began in 1919, after the armistice but were interrupted by a gearbox failure which resulted in a propeller breaking up and causing extensive damage. The second airframe, R24/16, was never completed and the first was not repaired after the ground running accident due to the restrictions of the Treaty of Versailles. At the time of its completion the Siemens-Schuckert R.VIII was the largest aeroplane in the world; (the Mannesman-Poll triplane was to have been much larger but was not completed before the Versailles Treaty came into force). [1]
Data fromThe German Giants and German aircraft of the First World War. [1] [2]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
The AEG R.I or Riesenflugzeug 1 was a four-engined biplane bomber aircraft of World War I manufactured by AEG.
The Zeppelin-Staaken R.VI was a four-engined German biplane strategic bomber of World War I, and the only Riesenflugzeug design built in any quantity.
A Riesenflugzeug, sometimes colloquially referred to in English as an R-plane, was any member of a class of large World War I German bombers, possessing at least three aircraft engines, although usually four or more engines. These large multi-engine aircraft could fly several hours with larger bomb loads than the smaller Grossflugzeug bombers such as the Gotha G.V.
The Linke-Hofmann R.I was a heavy bomber aircraft designed and built by the German company Linke-Hofmann during World War I. Only four were built and the type never saw service with the Luftstreitkräfte.
The Linke-Hofmann R.II was a bomber aircraft designed and built in Germany from 1917.
The DFW R.I,, was a prototype German bomber aircraft of World War I.
The DFW R.II was a German bomber aircraft of World War I. It was developed at a request by the Luftstreitkräfte in spring 1917 after their experience with the R.I had been generally positive, but only two were ever built despite six being ordered.
The DFW R.III was a German bomber aircraft designed during World War I, but which had not yet been built when the end of the war led to the project's cancellation. Conceptually similar to DFW's preceding R.I and R.II designs, the R.III was to have been a much larger aircraft, powered by eight engines. As with the previous designs, these were to be housed inside the fuselage, driving propellers by long driveshafts. In the R.III design, however, these propellers were to be mounted on a nacelle in the interplane gap. Each end of this nacelle would carry two co-axial propellers, each driven by a separate engine. Had it been built, the R.III would have been the largest aircraft in the world at the time.
The Zeppelin-Lindau Rs.I was a large three-engined biplane flying boat designed by Claudius Dornier and built during 1914–15 on the German side of Lake Constance. It was destroyed in a storm.
The Siemens-Schuckert R.I was a bomber aircraft built in Germany during World War I. It was originally ordered as the Siemens-Schuckert G.I prior to the German Inspectorate of Flying Troops adopting the "R" classification for multi-engine aircraft in late 1915. Some sources refer to the aircraft as the Siemens-Schuckert Steffen R.I, including the name of the brothers that designed it.
The Siemens-Schuckert Forssman was a prototype bomber aircraft designed and built in Germany in 1914 and 1915. When its performance proved inadequate for its intended role, even after numerous modifications, the German Inspectorate of Flying Troops eventually accepted it into service as a trainer. Shortly after its acceptance into military service, the aircraft's fuselage fractured while on the ground, ending its career.
The Siemens-Schuckert R.II was a prototype bomber aircraft built in Germany during World War I. It was one of six aircraft based on the Siemens-Schuckert R.I that were originally intended to be identical, but which each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops. Although the R.II was the first of the batch to be completed, it was the last accepted into military service, and then only as a trainer.
The Siemens-Schuckert R.III was a prototype bomber aircraft built in Germany during World War I. It was one of six aircraft based on the Siemens-Schuckert R.I that were originally intended to be identical, but which each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops. The aircraft's development was impeded by the unreliability of its Maybach HS engines, and when it was eventually accepted for military service, it was only in a training role.
The Siemens-Schuckert R.IV was a bomber aircraft built in Germany during World War I. It was one of six aircraft based on the Siemens-Schuckert R.I that were originally intended to be identical, but which each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops. The Maybach HS engines specified by the Idflieg proved unreliable, but with these engines were replaced by Benz Bz.IV engines, the R.IV saw service on the Eastern Front before being relegated to training duties.
The Siemens-Schuckert R.V was a bomber aircraft built in Germany during World War I. It was one of six aircraft based on the Siemens-Schuckert R.I that were originally intended to be identical, but which each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops. Development of the R.V benefited from the experience that Siemens-Schuckert and the Idflieg had gained with the R.II, R.III, and R.IV, particularly in its choice of powerplants, where the R.V was spared from the troublesome Maybach HS engine. Between September 1916 and February 1917, the aircraft saw service on the Eastern Front before it was damaged in an accident and dismantled for spare parts.
The Siemens-Schuckert R.VI was a bomber aircraft built in Germany during World War I. It was one of six aircraft based on the Siemens-Schuckert R.I, which were originally intended to be identical. Each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops.
The Siemens-Schuckert R.VII was a bomber aircraft built in Germany during World War I. It was one of six aircraft based on the Siemens-Schuckert R.I that were originally intended to be identical, but which each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops.
The Zeppelin-Staaken R.XVI(Av) was a very large bomber (Riesenflugzeug), designed and built in Germany during 1918.
The Zeppelin-Staaken R.VII was six-engined large bomber - a Riesenflugzeug - of Imperial Germany, intended to be less vulnerable than the airships in use at the time.
The Siemens-Schuckert DDr.I was a World War I German twin engine, push-pull configuration triplane fighter aircraft. Only one was built, crashing on its first flight.