Siemens-Schuckert R.II

Last updated
R.II
Siemens-Schuckert R.II - Ray Wagner Collection Image (21439620985).jpg
Role Bomber
National originGermany
Manufacturer Siemens-Schuckert
Designer Bruno and Franz Steffen [1]
First flight26 October 1915 [2]
Primary user Luftstreitkräfte [3]
Number built1 [2]
Developed from Siemens-Schuckert R.I

The Siemens-Schuckert R.II was a prototype bomber aircraft built in Germany during World War I. [4] [5] It was one of six aircraft based on the Siemens-Schuckert R.I that were originally intended to be identical, but which each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops (the Idflieg). [2] Although the R.II was the first of the batch to be completed, [2] it was the last accepted into military service, [2] and then only as a trainer. [1] [3] [4]

Contents

The Siemens-Schuckert R.II to R.VII were ordered in the G (Grossflugzeug - large aircraft) series and given serial numbers G.32/15 to G.37/15 respectively. These serials were changed on 13 July 1915 to G.33/15 - G.38/15, for unknown reasons and again on 6 November 1915 to R.2/15 - R.7/15 in the R (Riesenflugzeug - giant aircraft) series, adopting the R.II to R.VII designations. [2]

Design and development

As designed, the R.II was a large three-bay biplane with unstaggered wings of unequal span [6] and a fully enclosed cabin. Power was to be supplied by three 180-kW (240-hp) Maybach HS engines mounted internally in the fuselage, which transmitted their power via driveshafts to two propellers mounted tractor-fashion on the interplane struts nearest the fuselage. [7] The main undercarriage consisted of divided units, each of which carried dual wheels, and the tail was supported by a pair of tailwheels. [8] The fuselage was forked into an upper and lower section, which allowed a clear field of fire to the rear of the aircraft. [1]

The R.II first flew on 26 October 1915 [2] and was delivered to the military on 20 November. [9] The Maybach engines proved immediately troublesome, [9] prone to overheating and mechanical failure. [6] In February 1916, the engines were removed and returned to the manufacturer. [9] Ongoing trouble with the same engine in other aircraft eventually led Siemens-Schuckert to abandon work with these engines entirely [10] and in June, the firm asked the Idflieg whether to install Benz Bz.IV or Mercedes D.IVa in the R.II instead. [9] By the time that the Idflieg approved the Mercedes engine for installation, Siemens-Schuckert did not have the workforce available to install them, and placed the R.II in storage instead. [9]

While the R.II was in storage, the Idflieg changed its requirements for the aircraft, requesting that the operational altitude be increased from 3,000 to 3,500 m (9,800 to 11,500 ft), but hoping that even more altitude would be possible. [9] Siemens-Schuckert responded that this would not be possible with the Mercedes engines recently approved for installation, and suggested three Benz D.IV engines inside the fuselage, augmented by two more of the same engine mounted pusher-fashion in the interplane gap. [9] The Idflieg rejected this suggestion, insisting on the basic requirement of having the engines serviceable in flight. [9] By the time that workers were available for the R.II again, in early 1917, Siemens-Schuckert had gained experience with the similar R.VII and attempted to meet the Idflieg's requirements by installing extra sections in the wing to extend it to six bays [9] and thereby offset the extra weight of the new engines. [10] The upper wings were replaced with a new design with greater chord, [9] and the tail surfaces were enlarged. [9] Finally, bomb racks were fitted to the wings that could carry either six 50-kg bombs or four 100-kg bombs. [11]

During its acceptance flight, the newly refurbished R.II carried a 2,310-kg (5,100-lb) useful load to an altitude of 3,800 m (12,500 ft) and stayed aloft for four hours. Having satisfied requirements, R.II was delivered to Riesenflugzeugersatzabteilung (Rea — "giant aircraft support unit"), the support unit for R-type aircraft, on 29 June 1917. [3] Although the R.II's performance was a significant improvement over other R-type aircraft produced by Siemens-Schuckert, its increased span and weight limited its speed, and it could not keep pace with similar aircraft manufactured by Staaken then entering service. [3] The R.II was therefore relegated to training duties with the Riesenflugzeug Schulabteilung ("giant aircraft training unit") at Döberitz. In June 1918, it was transferred back to Rea at Cologne, where it crashed later that year. [3]

Units using this aircraft

Specifications

Data from Grey & Thetford 1962, p.572

General characteristics

Performance

Notes

  1. 1 2 3 Grey & Thetford 1962, p.572
  2. 1 2 3 4 5 6 7 Haddow & Grosz 1963, p.184
  3. 1 2 3 4 5 6 7 Haddow & Grosz 1963, p.187
  4. 1 2 Taylor 1989, p.808
  5. The Illustrated Encyclopedia of Aircraft, p.2920
  6. 1 2 Haddow & Grosz 1963, p.181
  7. Haddow & Grosz 1963, p.174
  8. Haddow & Grosz 1963, p.185
  9. 1 2 3 4 5 6 7 8 9 10 11 Haddow & Grosz 1963, p.186
  10. 1 2 Haddow & Grosz 1963, p.182
  11. Haddow & Grosz 1963, p.186–87

Related Research Articles

<span class="mw-page-title-main">Zeppelin-Staaken R.VI</span> Heavy bomber aircraft model

The Zeppelin-Staaken R.VI was a four-engined German biplane strategic bomber of World War I, and the only Riesenflugzeug design built in any quantity.

<i>Riesenflugzeug</i> Imperial German bomber class; largest warplanes of World War I

A Riesenflugzeug, sometimes colloquially referred to in English as an R-plane, was any member of a class of large World War I German bombers, possessing at least three aircraft engines, although usually four or more engines. These large multi-engine aircraft could fly several hours with larger bomb loads than the smaller Grossflugzeug bombers such as the Gotha G.V.

<span class="mw-page-title-main">Linke-Hofmann R.I</span> Type of aircraft

The Linke-Hofmann R.I was a heavy bomber aircraft designed and built by the German company Linke-Hofmann during World War I. Only four were built and the type never saw service with the Luftstreitkräfte.

<span class="mw-page-title-main">Linke-Hofmann R.II</span> Type of aircraft

The Linke-Hofmann R.II was a bomber aircraft designed and built in Germany from 1917.

<span class="mw-page-title-main">Zeppelin-Lindau Rs.I</span> Type of aircraft

The Zeppelin-Lindau Rs.I was a large three-engined biplane flying boat designed by Claudius Dornier and built during 1914–15 on the German side of Lake Constance. It was destroyed in a storm.

The Siemens-Schuckert R.I was a bomber aircraft built in Germany during World War I. It was originally ordered as the Siemens-Schuckert G.I prior to the German Inspectorate of Flying Troops adopting the "R" classification for multi-engine aircraft in late 1915. Some sources refer to the aircraft as the Siemens-Schuckert Steffen R.I, including the name of the brothers that designed it.

<span class="mw-page-title-main">Siemens-Schuckert Forssman</span> Type of aircraft

The Siemens-Schuckert Forssman was a prototype bomber aircraft designed and built in Germany in 1914 and 1915. When its performance proved inadequate for its intended role, even after numerous modifications, the German Inspectorate of Flying Troops eventually accepted it into service as a trainer. Shortly after its acceptance into military service, the aircraft's fuselage fractured while on the ground, ending its career.

<span class="mw-page-title-main">Siemens-Schuckert R.VIII</span> Type of aircraft

The Siemens-Schuckert R.VIII was a bomber aircraft designed and built in Germany from 1916.

The Siemens-Schuckert R.III was a prototype bomber aircraft built in Germany during World War I. It was one of six aircraft based on the Siemens-Schuckert R.I that were originally intended to be identical, but which each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops. The aircraft's development was impeded by the unreliability of its Maybach HS engines, and when it was eventually accepted for military service, it was only in a training role.

The Siemens-Schuckert R.IV was a bomber aircraft built in Germany during World War I. It was one of six aircraft based on the Siemens-Schuckert R.I that were originally intended to be identical, but which each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops. The Maybach HS engines specified by the Idflieg proved unreliable, but with these engines were replaced by Benz Bz.IV engines, the R.IV saw service on the Eastern Front before being relegated to training duties.

The Siemens-Schuckert R.V was a bomber aircraft built in Germany during World War I. It was one of six aircraft based on the Siemens-Schuckert R.I that were originally intended to be identical, but which each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops. Development of the R.V benefited from the experience that Siemens-Schuckert and the Idflieg had gained with the R.II, R.III, and R.IV, particularly in its choice of powerplants, where the R.V was spared from the troublesome Maybach HS engine. Between September 1916 and February 1917, the aircraft saw service on the Eastern Front before it was damaged in an accident and dismantled for spare parts.

<span class="mw-page-title-main">Siemens-Schuckert R.VI</span> German bomber aircraft

The Siemens-Schuckert R.VI was a bomber aircraft built in Germany during World War I. It was one of six aircraft based on the Siemens-Schuckert R.I, which were originally intended to be identical. Each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops.

<span class="mw-page-title-main">Siemens-Schuckert R.VII</span> Type of aircraft

The Siemens-Schuckert R.VII was a bomber aircraft built in Germany during World War I. It was one of six aircraft based on the Siemens-Schuckert R.I that were originally intended to be identical, but which each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops.

<span class="mw-page-title-main">Zeppelin-Staaken Riesenflugzeuge</span> Type of aircraft

The Zeppelin-Staaken Riesenflugzeuge were a series of very large bomber aircraft - Riesenflugzeuge, usually powered by four or more engines, designed and built in Germany from 1915 to 1919.

The Maybach Mb.IV, originally designated Maybach HS,, was a six cylinder in-line piston engine of 250 hp (190 kW) output, originally developed for use in airships. It was also used for large aircraft such as the Zeppelin-Lindau Rs.I giant seaplane.

<span class="mw-page-title-main">Daimler G.I</span> German WW1 bomber

The Daimler G.I, originally designated Daimler R.I, was a bomber aircraft designed and built in Germany from early in 1915.

<span class="mw-page-title-main">LFG Roland D.XV</span> 1910s German fighter aircraft

The LFG Roland D.XV was a World War I German single seat fighter aircraft, ordered as a test-bed for engine comparisons. It was distinguished from earlier Roland biplane designs by the elimination of flying wires. Two later aircraft, also called LFG Roland D.XV, were completely different designs with slab sided fuselages.

<span class="mw-page-title-main">LVG G.III</span> Type of aircraft

The LVG G.III was a large, twin engine triplane bomber built in Germany near the end of World War I. Only one was completed.

<span class="mw-page-title-main">Siemens-Schuckert L.I</span> Type of aircraft

The Siemens-Schuckert L.I was a large, three-engined biplane bomber aircraft, built in Germany towards the end of World War I. It was a twin boom design, strongly influenced by the successful Caproni Ca.3. Three were built but not used operationally.

<span class="mw-page-title-main">Zeppelin-Lindau Rs.IV</span> Type of aircraft

The Zeppelin-Lindau Rs.IV was a Riesenflugzeug monoplane all metal flying boat with a stressed skin hull and fuselage developed for the Imperial German Navy to perform long range patrols over the North Sea. It had been developed by Claudius Dornier while working for Zeppelin in the town of Lindau.

References