In magnetism, single domain refers to the state of a ferromagnet (in the broader meaning of the term that includes ferrimagnetism) in which the magnetization does not vary across the magnet. A magnetic particle that stays in a single domain state for all magnetic fields is called a single domain particle (but other definitions are possible; see below). [lower-alpha 1] Such particles are very small (generally below a micrometre in diameter). They are also very important in a lot of applications because they have a high coercivity. They are the main source of hardness in hard magnets, the carriers of magnetic storage in tape drives, and the best recorders of the ancient Earth's magnetic field (see paleomagnetism).
Early theories of magnetization in ferromagnets assumed that ferromagnets are divided into magnetic domains and that the magnetization changed by the movement of domain walls. However, as early as 1930, Frenkel and Dorfman predicted that sufficiently small particles could only hold one domain, although they greatly overestimated the upper size limit for such particles. [1] The possibility of single domain particles received little attention until two developments in the late 1940s: (1) Improved calculations of the upper size limit by Charles Kittel and Louis Néel, and (2) a calculation of the magnetization curves for systems of single-domain particles by Stoner and Wohlfarth. [2] [3] The Stoner–Wohlfarth model has been enormously influential in subsequent work and is still frequently cited.
Early investigators pointed out that a single-domain particle could be defined in more than one way. [4] Perhaps most commonly, it is implicitly defined as a particle that is in a single-domain state throughout the hysteresis cycle, including during the transition between two such states. This is the type of particle that is modeled by the Stoner–Wohlfarth model. However, it might be in a single-domain state except during reversal. Often particles are considered single-domain if their saturation remanence is consistent with the single-domain state. More recently it was realized that a particle's state could be single-domain for some range of magnetic fields and then change continuously into a non-uniform state. [5]
Another common definition of single-domain particle is one in which the single-domain state has the lowest energy of all possible states (see below).
If a particle is in the single-domain state, all of its internal magnetization is pointed in the same direction. It therefore has the largest possible magnetic moment for a particle of that size and composition. The magnitude of this moment is , where is the volume of the particle and is the saturation magnetization.
The magnetization at any point in a ferromagnet can only change by rotation. If there is more than one magnetic domain, the transition between one domain and its neighbor involves a rotation of the magnetization to form a domain wall. Domain walls move easily within the magnet and have a low coercivity. By contrast, a particle that is single-domain in all magnetic fields changes its state by rotation of all the magnetization as a unit. This results in a much larger coercivity.
The most widely used theory for hysteresis in single-domain particle is the Stoner–Wohlfarth model. This applies to a particle with uniaxial magnetocrystalline anisotropy.
Experimentally, it is observed that though the magnitude of the magnetization is uniform throughout a homogeneous specimen at uniform temperature, the direction of the magnetization is in general not uniform, but varies from one region to another, on a scale corresponding to visual observations with a microscope. Uniform of direction is attained only by applying a field, or by choosing as a specimen, a body which is itself of microscopic dimensions (a fine particle). [4] The size range for which a ferromagnet become single-domain is generally quite narrow and a first quantitative result in this direction is due to William Fuller Brown, Jr. who, in his fundamental paper, [6] rigorously proved (in the framework of Micromagnetics), though in the special case of a homogeneous sphere of radius , what nowadays is known as Brown’s fundamental theorem of the theory of fine ferromagnetic particles. This theorem states the existence of a critical radius such that the state of lowest free energy is one of uniform magnetization if (i.e. the existence of a critical size under which spherical ferromagnetic particles stay uniformly magnetized in zero applied field). A lower bound for can then be computed. In 1988, Amikam A. Aharoni, [7] by using the same mathematical reasoning as Brown, was able to extend the Fundamental Theorem to the case of a prolate spheroid. Recently, [8] Brown’s fundamental theorem on fine ferromagnetic particles has been rigorously extended to the case of a general ellipsoid, and an estimate for the critical diameter (under which the ellipsoidal particle become single domain) has been given in terms of the demagnetizing factors of the general ellipsoid. [9] Eventually, the same result has been shown to be true for metastable equilibria in small ellipsoidal particles. [10]
Although pure single-domain particles (mathematically) exist for some special geometries only, for most ferromagnets a state of quasi-uniformity of magnetization is achieved when the diameter of the particle is in between about 25 nanometers and 80 nanometers. [11] [lower-alpha 2] The size range is bounded below by the transition to superparamagnetism and above by the formation of multiple magnetic domains.
Thermal fluctuations cause the magnetization to change in a random manner. In the single-domain state, the moment rarely strays far from the local stable state. Energy barriers (see also activation energy) prevent the magnetization from jumping from one state to another. However, if the energy barrier gets small enough, the moment can jump from state to state frequently enough to make the particle superparamagnetic. The frequency of jumps has a strong exponential dependence on the energy barrier, and the energy barrier is proportional to the volume, so there is a critical volume at which the transition occurs. This volume can be thought of as the volume at which the blocking temperature is at room temperature.
As size of a ferromagnet increases, the single-domain state incurs an increasing energy cost because of the demagnetizing field. This field tends to rotate the magnetization in a way that reduces the total moment of the magnet, and in larger magnets the magnetization is organized in magnetic domains. The demagnetizing energy is balanced by the energy of the exchange interaction, which tends to keep spins aligned. There is a critical size at which the balance tips in favor of the demagnetizing field and the multidomain state is favored. Most calculations of the upper size limit for the single-domain state identify it with this critical size. [13] [14] [15]
Ferromagnetism is a property of certain materials that results in a significant, observable magnetic permeability, and in many cases, a significant magnetic coercivity, allowing the material to form a permanent magnet. Ferromagnetic materials are noticeably attracted to a magnet, a consequence of their substantial magnetic permeability.
Magnetism is the class of physical attributes that occur through a magnetic field, which allows objects to attract or repel each other. Because both electric currents and magnetic moments of elementary particles give rise to a magnetic field, magnetism is one of two aspects of electromagnetism.
A magnet is a material or object that produces a magnetic field. This magnetic field is invisible but is responsible for the most notable property of a magnet: a force that pulls on other ferromagnetic materials, such as iron, steel, nickel, cobalt, etc. and attracts or repels other magnets.
Magnetic refrigeration is a cooling technology based on the magnetocaloric effect. This technique can be used to attain extremely low temperatures, as well as the ranges used in common refrigerators.
Remanence or remanent magnetization or residual magnetism is the magnetization left behind in a ferromagnetic material after an external magnetic field is removed. Colloquially, when a magnet is "magnetized", it has remanence. The remanence of magnetic materials provides the magnetic memory in magnetic storage devices, and is used as a source of information on the past Earth's magnetic field in paleomagnetism. The word remanence is from remanent + -ence, meaning "that which remains".
Coercivity, also called the magnetic coercivity, coercive field or coercive force, is a measure of the ability of a ferromagnetic material to withstand an external magnetic field without becoming demagnetized. Coercivity is usually measured in oersted or ampere/meter units and is denoted HC.
A Halbach array is a special arrangement of permanent magnets that augments the magnetic field on one side of the array while cancelling the field to near zero on the other side. This is achieved by having a spatially rotating pattern of magnetisation.
Magnetic hysteresis occurs when an external magnetic field is applied to a ferromagnet such as iron and the atomic dipoles align themselves with it. Even when the field is removed, part of the alignment will be retained: the material has become magnetized. Once magnetized, the magnet will stay magnetized indefinitely. To demagnetize it requires heat or a magnetic field in the opposite direction. This is the effect that provides the element of memory in a hard disk drive.
In classical electromagnetism, magnetization is the vector field that expresses the density of permanent or induced magnetic dipole moments in a magnetic material. Accordingly, physicists and engineers usually define magnetization as the quantity of magnetic moment per unit volume. It is represented by a pseudovector M. Magnetization can be compared to electric polarization, which is the measure of the corresponding response of a material to an electric field in electrostatics.
Micromagnetics is a field of physics dealing with the prediction of magnetic behaviors at sub-micrometer length scales. The length scales considered are large enough for the atomic structure of the material to be ignored, yet small enough to resolve magnetic structures such as domain walls or vortices.
A magnetic domain is a region within a magnetic material in which the magnetization is in a uniform direction. This means that the individual magnetic moments of the atoms are aligned with one another and they point in the same direction. When cooled below a temperature called the Curie temperature, the magnetization of a piece of ferromagnetic material spontaneously divides into many small regions called magnetic domains. The magnetization within each domain points in a uniform direction, but the magnetization of different domains may point in different directions. Magnetic domain structure is responsible for the magnetic behavior of ferromagnetic materials like iron, nickel, cobalt and their alloys, and ferrimagnetic materials like ferrite. This includes the formation of permanent magnets and the attraction of ferromagnetic materials to a magnetic field. The regions separating magnetic domains are called domain walls, where the magnetization rotates coherently from the direction in one domain to that in the next domain. The study of magnetic domains is called micromagnetics.
In condensed matter physics, magnetic anisotropy describes how an object's magnetic properties can be different depending on direction. In the simplest case, there is no preferential direction for an object's magnetic moment. It will respond to an applied magnetic field in the same way, regardless of which direction the field is applied. This is known as magnetic isotropy. In contrast, magnetically anisotropic materials will be easier or harder to magnetize depending on which way the object is rotated.
In physics, the Landau–Lifshitz–Gilbert equation, named for Lev Landau, Evgeny Lifshitz, and T. L. Gilbert, is a name used for a differential equation describing the precessional motion of magnetization M in a solid. It is a modification by Gilbert of the original equation of Landau and Lifshitz.
Viscous remanent magnetization, also known as viscous magnetization, is remanence that is acquired by ferromagnetic materials by sitting in a magnetic field for some time. The natural remanent magnetization of an igneous rock can be altered by this process. This is generally an unwanted component and some form of stepwise demagnetization must be used to remove it.
In electromagnetism, the Stoner–Wohlfarth model is a widely used model for the magnetization of ferromagnets with a single-domain. It is a simple example of magnetic hysteresis and is useful for modeling small magnetic particles in magnetic storage, biomagnetism, rock magnetism and paleomagnetism.
The demagnetizing field, also called the stray field, is the magnetic field (H-field) generated by the magnetization in a magnet. The total magnetic field in a region containing magnets is the sum of the demagnetizing fields of the magnets and the magnetic field due to any free currents or displacement currents. The term demagnetizing field reflects its tendency to act on the magnetization so as to reduce the total magnetic moment. It gives rise to shape anisotropy in ferromagnets with a single magnetic domain and to magnetic domains in larger ferromagnets.
William Fuller Brown Jr. was an American physicist who developed the theory of micromagnetics, a continuum theory of ferromagnetism that has had numerous applications in physics and engineering. He published three books: Magnetostatic Principles in Ferromagnetism, Micromagnetics, and Magnetoelastic Interactions.
A domain wall is a term used in physics which can have similar meanings in magnetism, optics, or string theory. These phenomena can all be generically described as topological solitons which occur whenever a discrete symmetry is spontaneously broken.
An exchange spring magnet is a magnetic material with high coercivity and high saturation properties derived from the exchange interaction between a hard magnetic material and a soft magnetic material, respectively.
In condensed matter physics, an Arrott plot is a plot of the square of the magnetization of a substance, against the ratio of the applied magnetic field to magnetization at one fixed temperature(s). Arrott plots are an easy way of determining the presence of ferromagnetic order in a material. They are named after American physicist Anthony Arrott who introduced them as a technique for studying magnetism in 1957.