A Sol-20 with monitorTyping a BASIC program into the Sol-20
The Sol-20 was the first fully assembled microcomputer with a built-in keyboard and television output,[lower-alpha 1] what would later be known as a home computer. The design was the integration of an Intel 8080-based motherboard, a VDM-1graphics card, the 3P+S I/O card to drive a keyboard, and circuitry to connect to a cassette deck for program storage. Additional expansion was available via five S-100 bus slots inside the machine. It also included swappable ROMs that the manufacturer called 'personality modules', containing a rudimentary operating system.
The design was originally suggested by Les Solomon, the editor of Popular Electronics.[1] He asked Bob Marsh of Processor Technology if he could design a smart terminal for use with the Altair 8800. Lee Felsenstein, who shared a garage working space with Marsh, had previously designed such a terminal but never built it. Reconsidering the design using modern electronics, they agreed the best solution was to build a complete computer with a terminal program in ROM. Felsenstein suggested the name "Sol" because they were including "the wisdom of Solomon" in the box.
The Sol appeared on the cover of the July 1976 issue of Popular Electronics as a "high-quality intelligent terminal". It was initially offered in three versions; the Sol-PC motherboard in kit form, the Sol-10 without expansion slots, and the Sol-20 with five slots.[2]
A Sol-20 was taken to the Personal Computing Show in Atlantic City in August 1976 where it was a hit, building an order backlog that took a year to fill. Systems began shipping late that year and were dominated by the expandable Sol-20, which sold for $1,495 in its most basic fully-assembled form. The company also offered schematics for the system for free for those interested in building their own.
The Sol-20 remained in production until 1979, by which point about 12,000 machines[lower-alpha 2] had been sold. By that time, the "1977 trinity" —the Apple II, Commodore PET and TRS-80— had begun to take over the market, and a series of failed new product introductions drove Processor Technology into bankruptcy. Felsenstein later developed the successful Osborne 1 computer, using much the same underlying design in a portable format.
History
Tom Swift Terminal
Lee Felsenstein was one of the sysops of Community Memory, the first public bulletin board system. Community Memory opened in 1973, running on a SDS 940mainframe that was accessed through a Teletype Model 33, essentially a computer printer and keyboard, in a record store in Berkeley, California. The cost of running the system was untenable; the teletype normally cost $1,500 (their first example was donated from Tymshare as junk), the modem another $300, and time on the SDS was expensive – in 1968, Tymshare charged $13 per hour (equivalent to $114in 2023).[4] Even the reams of paper output from the terminal were too expensive to be practical and the system jammed all the time.[5] The replacement of the Model 33 with a Hazeltine glass terminal helped, but it required constant repairs.[6][lower-alpha 3]
Since 1973, Felsenstein had been looking for ways to lower the cost.[7] One of his earliest designs in the computer field was the Pennywhistle modem,[8] a 300 bits per secondacoustic coupler that was 1/3 the cost of commercial models. When he saw Don Lancaster's TV Typewriter on the cover of the September 1973 Radio Electronics, he began adapting its circuitry as the basis for a design he called the Tom Swift Terminal. The terminal was deliberately designed to allow it to be easily repaired.[9] Combined with the Pennywhistle, users would have a cost-effective way to access Community Memory.[10]
In January 1975, Felsenstein saw a post on Community Memory by Bob Marsh asking if anyone would like to share a garage.[lower-alpha 4] Marsh was designing a fancy wood-cased digital clock and needed space to work on it.[lower-alpha 5] Felsenstein had previously met Marsh at school and agreed to split the $175 rent on a garage in Berkeley. Shortly after, Community Memory shut down for the last time,[13] having burned out the relationship with its primary funding source, Project One, as well the energy of its founding members.[5]
Processor Technology
As supplied, the Altair 8800 could only be programmed via front-panel switches and lights. A cost-effective terminal was lacking.
January 1975 was also the month that the Altair 8800 appeared on the front page of Popular Electronics, sparking off intense interest among the engineers of the rapidly growing Silicon Valley. Shortly thereafter, on 5 March 1975, Gordon French and Fred Moore held the first meeting of what would become the Homebrew Computer Club. Felsenstein took Marsh to one of the meetings,[14][lower-alpha 6] Marsh saw an opportunity supplying add-on cards for the Altair, and in April, he formed Processor Technology with his friend Gary Ingram.[14]
The new company's first product was a 4kBDRAM memory card for the Altair. A similar card was already available from the Altair's designers, MITS, but it was almost impossible to get working properly.[16] Marsh began offering Felsenstein contracts to draw schematics or write manuals for the products they planned to introduce. Felsenstein was still working on the terminal as well, and in July, Marsh offered to pay him to develop the video portion.[7] This was essentially a version of the terminal where the data would be supplied by the main memory of the Altair rather than a serial port.[17]
The result was the VDM-1, the first graphics card. The VDM-1 could display 16 lines of 64 characters per line,[lower-alpha 7] and included the complete ASCII character set with upper- and lower-case characters and a number of graphics characters like arrows and basic math symbols. An Altair equipped with a VDM-1 for output and Processor Technology's 3P+S card running a keyboard for input removed the need for a terminal, yet cost less than dedicated smart terminals like the Hazeltine.[19][lower-alpha 8]
Intelligent terminal concept
Before the VDM-1 was launched in late 1975, the only way to program the Altair was through its front-panel switches and LED lamps, or by purchasing a serial card and using a terminal of some sort. This was typically a Model 33, which still cost $1,500 if available. Normally the teletypes were not available –Teletype Corporation typically sold them only to large commercial customers, which led to a thriving market for broken-down machines that could be repaired and sold into the microcomputer market.[21]Ed Roberts, who had developed the Altair, eventually arranged a deal with Teletype to supply refurbished Model 33s to MITS customers who had bought an Altair.[21]
Les Solomon, whose Popular Electronics magazine launched the Altair, felt a low-cost smart terminal would be highly desirable in the rapidly expanding microcomputer market. In December 1975, Solomon traveled to Phoenix to meet with Don Lancaster to ask about using his TV Typewriter as a video display in a terminal. Lancaster seemed interested, so Solomon took him to Albuquerque to meet Roberts.[21] The two immediately began arguing when Lancaster criticized the design of the Altair and suggested changes to better support expansion cards, demands that Roberts flatly refused. Any hopes of a partnership disappeared.[22]
Solomon then traveled to California and approached Marsh with the same idea, stating that if they could produce the design within 30 days, he would put it on the cover of the magazine. Marsh once again hired Felsenstein to design the system.[22] As Felsenstein later noted:
In the process leading to the birth of the Sol, Leslie Solomon performed the act of the male. I still don't know who solicited whom.[23]
Design effort
Felsenstein initially wanted to build a terminal following the model of his earlier Tom Swift design, using discrete electronics.[18] Marsh, in parallel, sketched out a version using the Intel 8080. It quickly became apparent the difference in cost would only be about $10, and from then on the original dedicated terminal concept was dropped.[22][7] Over time the plans changed, and at some point, Marsh told Felsenstein "We want you to design a computer around the VDM display."[24]
Initially, the idea was to sell a kit system, as was common in the industry at that time. The kit concept would make it through to the release, at which time it was known as the Sol-PC. As the design process continued, at some point the decision was made to offer the system in complete form, with all the parts needed for a complete system.[lower-alpha 9]
Felsenstein originally thought he was only needed for the initial design, but as the physical layout began it was clear that the layout artist they had hired would not be able to do it on his own. Marsh had a woodworker friend build a large light table and Felsenstein and the layout artist began using it to design the printed circuit board for the motherboard.[25] While Felsenstein worked on the design, Marsh continually came up with new ideas that he demanded to be included. This led to creeping featuritis problems and the final design was not delivered until about two months of "frantic" work.[26]
The final product consisted of a single motherboard with the 8080, a simplified version of the VDM-1, serial input/output, and 1k of SRAM for the screen buffer.[1] A ROM, the "personality module", would include the terminal driver or other code which would begin running as soon as the machine was turned on. The module was designed so it could be removed or inserted without accessing the interior of the machine.[26]
Marsh, meanwhile, was working on the physical design. He demanded from the start that it use walnut sides; while working on the digital clock project he had learned from his woodworker friend that they could get parts for practically nothing if they were small enough to be made from off-cuts. Beyond that requirement, anything was fair. The deadline for the magazine had been pushed back, but there was still little time to finalize the layout before it needed to be photographed. Marsh decided that the machine should have a cassette deck, so they mocked up a machine with a keyboard on the left and cassette player on the right.[25]
The first motherboard arrived 45 days after the project started, and the first cases and power supplies about 15 days after that. By this point it was clear the system was a usable microcomputer on its own, but "the decision was made to soft-pedal the fact until the last possible moment. Once published, all the fuss possible was to be made about its general-purpose nature; but until it actually saw print, it was to be treated first as a terminal."[26]
As the machine increasingly expanded in power, Felsenstein suggested the name "Sol", because they were including "the wisdom of Solomon" in the system.[7] Les Solomon would later quip that "if it worked, they'll say Sol means 'sun' in Spanish. If it don't work, they're gonna blame it on the Jewish guys."[27]Stan Veit later joked to Solomon that they named it after him in another way, "the LES Intelligent Terminal".[28]
Release
The original mock-up of the Sol shows a slimmer case and a cassette deck where the numeric keypad would ultimately be placed.
In February 1976, the first machine, a kludged-up box of parts, was readied and flown to New York to show Solomon. As he pointed out the features, Solomon asked what was stopping anyone from putting a BASIC on the personality ROM. Felsenstein, who had been told to avoid referring to it as a computer, simply replied "beats me".[24] When they powered it up the machine would not work, displaying unreadably fuzzy images. Marsh and Felsenstein then flew to Boston to visit the offices of the newly started Byte magazine. While there, Felsenstein had time to discover the problem was a tiny bit of broken wire that got stuck under a chip, shorting out two of the video lines. They returned to Solomon's house to demonstrate the working unit.[24]
Due to publication timelines, it did not appear in the magazine until the July 1976 issue, where it was described as "high-quality intelligent terminal". The cover image showed the mockup version, packaged in a slim case.[29] By the time the article appeared, the design had changed; the new design had a distinct "step" behind the keyboard that rose up over the expansion chassis and power supply at the back of the case. A bent piece of sheet steel formed most of the case, capped on the left and right by the wooden panels Marsh demanded.[25]
The new design was first shown at the Midwest Area Computer Club conference in June 1976. The machine was not ready for sales at this point, but they did a brisk business selling their existing expansion card line.[30] This was followed by the Personal Computing '76 (PC'76) show in late August in the dilapidated Shelburne Hotel in Atlantic City. The order book was officially opened[3] and Sol was a huge hit at this show.[31]
Soon after, Marsh was invited to demonstrate the Sol on NBC's The Tomorrow Show. They used a game by Steve Dompier called "Target" to show off the system's capabilities.[32] The show's host, Tom Snyder, ended up playing the game right through the commercial breaks, and they had to force him to give up the machine in order to finish the show.[33]
Sales
The Sol was initially offered in three versions.[34] The base motherboard was offered as the Sol-PC, available as a kit for $575, or fully assembled and tested for $745. The Sol-10 added a case, keyboard and power supply, was $895 in kit form and $1,295 assembled. Finally the Sol-20 added a keyboard with numeric keypad, and a larger power supply to feed the five expansion slots and a fan to cool them, for $995 as a kit or $1,495 assembled. Advertising of the time referred to the Sol-20 as "The first complete small computer under $1,000".[35] Most systems would require additional pieces, which they bundled as the "Sol Systems"; the Sol System I consisted of a Sol-20, an 8k RAM card, a PT-872 monitor and the RQ-413 Cassette Recorder, for $2,129.[36]
In keeping with the hacker ethic, the company also offered to send out copies of the schematic for the motherboard for the cost of postage, later estimating that somewhere between 40,000 and 50,000 copies were sent. Few, if any, Sol-10s were sold,[lower-alpha 10] and the company focused on the Sol-20. The first machines shipped in December 1976. These were also available for third-party sales, and this began the formation of a dealer network among some of the earliest computer stores. By 1977, Processor Technology had a reputation for quality and was among the best-selling computers in the world.[31]
By this time, S-100 machines were beginning to make inroads into business markets. Processor Technology invited all of their dealers to a meeting in Emeryville, California, outside Berkeley, to introduce their Helios floppy disk drive for $1,199, along with their PTDOS system to work with it. They also promised larger memory cards and a color video card. Additionally, dealers could now order 30 days net, as opposed to cash-on-delivery, although to do so they had to put in orders at least once a quarter.[31]
Collapse
These plans quickly fell apart. The Helios was initially based on a new mechanism from Diablo Data Systems. Diablo had been purchased by Xerox in 1972, and shortly after the Helios was announced, Xerox canceled development of the floppy line. Processor Technology selected the new Persci 270 in its place. The 270 had two drive bays operated by a single drive and voice coil head positioner, which meant a two-drive system was only slightly more complex than a single drive. This was released as the Helios II, at $1,895 for the kit or $2,295 assembled. Processor Technology moved to a much larger factory in Pleasanton, California.[31]
It was at about this point that Radio Shack introduced the TRS-80. Like the Sol, it was a complete all-in-one machine but came with its own monitor and sold for about half the price. Moreover, it was available at hundreds of Radio Shack stores across North America. Sales of the Sol plummeted. Meanwhile, the company failed to introduce any of the other new products it mentioned, notably the color graphics card. When the Apple II appeared with color graphics, it quickly became a best seller.[31]
To add to their woes, Processor Technology had contracted North Star Computers to write a new version of the BASIC for the Sol machines. North Star then began selling the resulting North Star BASIC to other vendors as well. Processor Technology sued North Star, claiming the contract had been exclusive. The suit dragged on, hurting both companies before Processor Technology ultimately lost. To add to the injury, North Star then released a new 5.25-inch drive for the system that sold at half the cost of the Helios. A patch that allowed CP/M to run on the new drives killed off any interest in alternatives like PTDOS, and new business applications like WordStar and Electric Pencil soon cemented CP/M as the standard operating system for all S-100 machines.[31]
Processor Technology continued selling the Helios system and refused to consider replacing PTDOS with CP/M. Helios proved to be highly unreliable and resulted in a lawsuit by those owners that had purchased them. Meanwhile, the company introduced one of its few new products during this period, 32 and 64kB memory cards based on dynamic RAM which was much denser than the older SRAMs. These began failing at an alarming rate, overwhelming the company's ability to repair them.[31]
The Micro Expander microcomputer, designed by Felsenstein and released in 1981, is seen as the Sol-20's spiritual successor.
These problems caused the company to go bankrupt, and the company was eventually liquidated on 14 May 1979.[31] Talks of producing a successor to the Sol-20 between Felsenstein and a group of investors including Adam Osborne fell through after Felsenstein enumerated all the improvements that would need to be made to make it competitive in the burgeoning early 1980s home computer market. However, in 1980, he collaborated with a Swedish businessman named Mats Ingemanson and brought to market the Micro Expander, seen as the spiritual successor to the Sol-20.[37]
Description
From the Sol Systems Manual unless otherwise noted.
Physical layout
A Sol-20 with the rear cover removedSol-20 motherboard. Note the expansion chassis in the center, and the Personality Module ROM cartridge on the extreme right.Two PM-5204, two PM-2708, one Golemics, and one Micro Complex dual personality modules for Sol-20
Looking at the Sol-20 from the front, where the operator would sit, the keyboard was in a typical location with the main QWERTY-style layout on the left and the numeric keypad on the right. The wooden sides of the case were close on either side of the keyboard, potentially interfering with the operator's hands.[38]
On the rear right of the case (as seen from the front), directly to the rear of the numeric keypad, was the power supply, which also provided a fan to cool the circuitry. The main motherboard sat to the left of the power supply, spanning about 2/3 of the case's width. The motherboard extended forward under the keyboard all the way to the front of the case.[38]
Cassette, parallel and serial ports extended off the back of the motherboard into holes in the case. Directly below the fan, was a UHF connector that produced composite video output. This could be connected to a monitor, or with a bit of work, a conventional television. The processor was near the back of the machine, with the memory and video circuits at the front. This required the video output to be routed to the back of the machine with a coaxial cable running across the top of the card.[39]
Sol bus
Originally, expansion was going to be handled through an external cage that connected to the main console using two 50-pin ribbon cables. The original Altair bus design lacked signal ground pins for each of its data lines, a decision that had been made in order to reduce pin count and allow it to fit into 100-pin connectors they found in surplus. This led to noisy signals as they all shared a common ground, a topic of considerable derision by many users. When the bus was extended into a ribbon cable, the resulting signals were too noisy to be useful, and Marsh demanded that there be additional ground pins spread across the cable to reduce this noise.[26]
The Sol solved this problem by supporting only one of the two data busses at a time, allowing input or output and switching between them by signaling with the DBIN pin on the 8080. Since only one bus was being used at a time, they could share a set of eight pins, which allowed the eight formerly dedicated to the second bus to be used as ground lines instead. Ultimately, the idea of using an external chassis was dropped. By this time the decision to use the additional lines for grounds had been made, which had the desirable side-effect of making the board easier to design.[26]
The same 50-pin concept was instead implemented in an internal expansion chassis, the Sol-BPB. This extended vertically upwards from roughly the center of the motherboard. It had five horizontal connectors, and a metal framework on either side mechanically supported the expansion cards. The chassis also had another edge connector at the top, but it is unclear whether this could be used for further expansion.[40] The BPB retained the DBIN signaling and ground pins of the early design and this quickly became a de facto standard for S-100 cards.[26]
This change to the bus design was contentious, as it meant cards for the Altair did not work in the Sol without some adjustments. Felsenstein noted, "I take the position that Bob made me do it, and he takes the position that history will absolve him."[26]
Software
Three "personality modules" were released with the original systems.[41] CONSOL provided a simple terminal emulator function, along with a small number of additional commands to load and run programs from tape using TLOAD. SOLOS added names to the files on the cassette, the TSAVE command for saving data to the tape into a named file, and TCAT to print out the details of a named program. TXEC loaded and executed a named program in one step. SOLED included block-mode editing, used on some mainframe systems, but it is not clear if this was actually available.[42]
One commonly used software for the Sol-20 was the BASIC/5 language. This was able to run in even a minimal machine with a 4KB expansion, but in order to fit it had only single-precision floating point numbers and lacked string variables. An Extended BASIC that ran in 8KB added strings and other functions. Processor Technology also sold a wide variety of other programs, including many games, on cassette format for the Sol, or on punch tape for other S-100 machines.[43]
Notes
↑ Earlier machines like the Micral N or Altair 8800 required a separate terminal for interactive use. Others, like the Sphere 1, were built into a terminal. The Sol-20 required only a television for output, everything else needed was built in.
↑ Some sources put it at 5,000 kits and 5,000 assembled machines, but Felsenstein puts it at 12,000 total.[3]
↑ Hackers states it was a Hazeltine 1500,[6] but that is not possible, the 1500 was not introduced until 1977. This is almost certainly the similar, but more expensive, Hazeltine 2000, which was released in late 1970.
↑ There are minor variations on the theme; in his 2008 interviews, Felsenstein suggests this took place in 1974.[11]
↑ Marsh ultimately gave up on the clock design.[12]
↑ Here too the stories vary somewhat; Felsenstein's 2008 interviews state they went to the first meeting together, while his 1977 article states he did not attend until the second meeting in March. However, the first meeting of the club was in March,[15] the second in April.
↑ 16 × 64 = 1,024, the number of bits in a 1kB SRAM.[18]
↑ According to Anderson, the VDM-1 was $199, and monitors were available "for $150 or so."[19] In contrast, the Hazeltine 2000 terminal sold for $2,995, and the "low-cost" 1500 series, introduced in 1977, started at $1,125.[20]
↑ Depending on the way you read the words in his oral history, Felsenstein suggests this may have been the idea all along.[24]
↑ As Felsenstein later put it, "Nobody ever bought one".[24]
Related Research Articles
The IBM Personal Computer is the first microcomputer released in the IBM PC model line and the basis for the IBM PC compatible de facto standard. Released on August 12, 1981, it was created by a team of engineers and designers at International Business Machines (IBM), directed by William C. Lowe and Philip Don Estridge in Boca Raton, Florida.
The Apple IIe is the third model in the Apple II series of personal computers produced by Apple Computer. It was released in January 1983 as the successor to the Apple II Plus. The e in the name stands for enhanced. It is the first Apple II with built-in lowercase and 80-column text support, as well as 64K RAM, while reducing the total chip count from previous models by approximately 75%.
In computing, an expansion card is a printed circuit board that can be inserted into an electrical connector, or expansion slot on a computer's motherboard to add functionality to a computer system. Sometimes the design of the computer's case and motherboard involves placing most of these slots onto a separate, removable card. Typically such cards are referred to as a riser card in part because they project upward from the board and allow expansion cards to be placed above and parallel to the motherboard.
The KIM-1, short for Keyboard Input Monitor, is a small 6502-based single-board computer developed and produced by MOS Technology, Inc. and launched in 1976. It was very successful in that period, due to its low price and easy-access expandability.
The Homebrew Computer Club was an early computer hobbyist group in Menlo Park, California, which met from March 1975 to December 1986. The club had an influential role in the development of the microcomputer revolution and the rise of that aspect of the Silicon Valley information technology industrial complex.
The Altair 8800 is a microcomputer designed in 1974 by MITS and based on the Intel 8080 CPU. Interest grew quickly after it was featured on the cover of the January 1975 issue of Popular Electronics and was sold by mail order through advertisements there, in Radio-Electronics, and in other hobbyist magazines. According to Harry Garland, the Altair 8800 was the product that catalyzed the microcomputer revolution of the 1970s. It was the first commercially successful personal computer. The computer bus designed for the Altair was to become a de facto standard in the form of the S-100 bus, and the first programming language for the machine was Microsoft's founding product, Altair BASIC.
The S-100 bus or Altair bus, IEEE 696-1983(inactive-withdrawn), is an early computer bus designed in 1974 as a part of the Altair 8800. The S-100 bus was the first industry standard expansion bus for the microcomputer industry. S-100 computers, consisting of processor and peripheral cards, were produced by a number of manufacturers. The S-100 bus formed the basis for homebrew computers whose builders implemented drivers for CP/M and MP/M. These S-100 microcomputers ran the gamut from hobbyist toy to small business workstation and were common in early home computers until the advent of the IBM PC.
The Kansas City standard (KCS), or Byte standard, is a data storage protocol for standard cassette tapes or other audio recording media at 300 bits per second. It originated in a symposium sponsored by Byte magazine in November 1975 in Kansas City, Missouri to develop a standard for the storage of digital microcomputer data on inexpensive consumer quality cassettes. The first systems based on the standard appeared in 1976.
"An Open Letter to Hobbyists" is a 1976 open letter written by Bill Gates, the co-founder of Microsoft, to early personal computer hobbyists, in which Gates expresses dismay at the rampant software piracy taking place in the hobbyist community, particularly with regard to his company's software.
Micro Instrumentation and Telemetry Systems, Inc. (MITS), was an American electronics company founded in Albuquerque, New Mexico that began manufacturing electronic calculators in 1971 and personal computers in 1975.
Popular Electronics was an American magazine published by John August Media, LLC, and hosted at TechnicaCuriosa.com. The magazine was started by Ziff-Davis Publishing Company in October 1954 for electronics hobbyists and experimenters. It soon became the "World's Largest-Selling Electronics Magazine". In April 1957, Ziff-Davis reported an average net paid circulation of 240,151 copies. Popular Electronics was published until October 1982 when, in November 1982, Ziff-Davis launched a successor magazine, Computers & Electronics. During its last year of publication by Ziff-Davis, Popular Electronics reported an average monthly circulation of 409,344 copies. The title was sold to Gernsback Publications, and their Hands-On Electronics magazine was renamed to Popular Electronics in February 1989, and published until December 1999. The Popular Electronics trademark was then acquired by John August Media, who revived the magazine, the digital edition of which is hosted at TechnicaCuriosa.com, along with sister titles, Mechanix Illustrated and Popular Astronomy.
Lee Felsenstein is an American computer engineer who played a central role in the development of personal computers. He was one of the original members of the Homebrew Computer Club and the designer of the Osborne 1, the first mass-produced portable computer.
Processor Technology Corporation was a personal computer company founded in April 1975, by Gary Ingram and Bob Marsh in Berkeley, California. Their first product was a 4K byte RAM board that was compatible with the MITS Altair 8800 computer but more reliable than the MITS board. This was followed by a series of memory and I/O boards including a video display module.
A personal computer, often referred to as a PC, is a computer designed for individual use. It is typically used for tasks such as word processing, internet browsing, email, multimedia playback, and gaming. Personal computers are intended to be operated directly by an end user, rather than by a computer expert or technician. Unlike large, costly minicomputers and mainframes, time-sharing by many people at the same time is not used with personal computers. The term home computer has also been used, primarily in the late 1970s and 1980s. The advent of personal computers and the concurrent Digital Revolution have significantly affected the lives of people.
Heathkit's H8 is an Intel 8080A-based microcomputer sold in kit form starting in 1977. The H8 is similar to the S-100 bus computers of the era, and like those machines is often used with the CP/M operating system on floppy disk.
The Pennywhistle was an early acoustic coupler modem originally designed and built by Lee Felsenstein in 1973, and later commercialized and offered for sale in 1976. It was one of the earliest modems available for hobbyist computer users. Like most acoustic coupler modems, the Pennywhistle was replaced by the Hayes Smartmodem and similar models from the early 1980s.
The Processor Technology VDM-1, for Video Display Module, was the first video card for S-100 bus computers. It was created in 1975 and allows an S-100 machine to produce its own display. When paired with a keyboard and Processor Technology's 3P+S card, it eliminates the need for a separate video terminal. Using a 7 x 9 dot matrix and ASCII characters, it produces a 64-column by 16-row text display.
Trek-80 is a text-based video game written by Steve Dompier in 1976 and sold by Processor Technology for their Sol-20 computer and suitable S-100 bus machines.
The 3P+S Input/Output Module was an S-100 expansion card introduced to the microcomputer market by Processor Technology. It supplied three parallel ports and one serial port, the latter of which conformed to the RS-232C standard. One of the three parallel ports was dedicated to interfacing with the host computer over the S-100 bus, while the other two were available for general use.
The Micro Expander Model 1 is an S-100-based microcomputer introduced by Micro-Expander, Inc., in 1981. The computer was the brainchild of Lee Felsenstein, designer of the Sol-20, the first home computer. After his primary client and marketers of the Sol-20, Processor Technology, went out of business in 1979, Felsenstein founded a new company, Micro-Expander, Inc., in 1980. He gained the capital to sell his prototype of a successor to the Sol-20 as the Micro Expander Model 1 with help from some Swedish investors, primarily Mats Ingemanson, who was hired to market the computer.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
