Company type | Private |
---|---|
Industry | automobiles and commercial vehicles |
Founded | 1906 |
Defunct | 1909 |
Headquarters | , |
Products | highwheeler automobiles and light delivery vehicles |
The Success Automobile Manufacturing Company was a brass era United States automobile manufacturer, located at 532 De Ballviere Avenue, [1] St. Louis, Missouri, in 1906.
Business concentrated on building high wheeler automobiles, mainly buggies.
The Success Automobile Manufacturing Company was founded in 1906 by John C. Higdon, who had built his first car in 1896; back then for experimental purposes only. Production started with a price of US$250 [2] which was exceedingly low, even for high wheelers. It is the lowest nominal that a new car has ever been sold for, even lower than $260 Ford T in 1925. Later models became slightly more complex, and expensive. While Success always stayed with highwheelers, they got a twin cylinder engine in 1908 (singles being dropped at the end of that year), built a commercial car in 1908 only, and offered several new models in 1909, among them their only four-cylinder car. Two- and four cylinder engines were available with water or air cooling.
While Higdon was open to let people copy his construction back in 1896, and even publicly invited to do so, he became much more aware of patents and royalties when building cars on a commercial schedule. So, he took several competitors to court on this matter; among them the Economy Motor Buggy Company in Fort Wayne, Indiana, and the W. H. Kiblinger Company in Auburn, Indiana (a predecessor of the Auburn Automobile Company). Although, the Success Automobile Manufacturing Company folded before the end of this litigations.
It is estimated, that Success built ca. 600 vehicles.
Success only offered high-wheeler models. The initial Model A featured an air-cooled single cylinder gasoline engine of 3 x 3 in. bore and stroke, giving a capacity of 21,21 c.i. or 347.5 cm³, and delivered 2 to 3 HP., [3] steel tires (rubber was available, for US$25 extra), and a 2-speed planetary transmission brought power via a single chain to a sprocket on the right rear wheel only. The engine was placed under the car, on the right side below the driver's seat. [4] Front wheels had a diameter of 37 in. (940 mm), rear wheels of 41 in. (1041 mm). [3]
It claimed speeds of 4-18 mph (6.5–29 km/h) and mileage of 100mpg (4.25 L/100 km). [2]
A slightly improved Model B followed in 1907 with a 4 HP single cylinder engine.
Also in 1908, a slightly more sophisticated high wheeler came with the 2-cylinder Model C. Its engine delivered 10 HP, and the vehicle got a longer wheelbase. 1908 brought two more horsepower to the Model C, and a choice of bodywork, including the first Success commercial car. In 1909, the final year of the company's existence, the single cylinder model and the additional body styles for the Model C were dropped. Instead, new models were introduced: Model D, a Surrey that offered more power and a longer wheelbase for less money than the previous C variant, Model E, which was a more comfortable runabout than the C, offering more power and the longest wheelbase of all Success cars (96 in. / 2438 mm), and finally a different type of car, a 24 hp four-cylinder sports car.
Year | Model | Engine | Power | Wheelbase in. / mm | Bodywork | Price | Remark |
---|---|---|---|---|---|---|---|
1906 | A | 1 cyl. | 2-3 HP | 62 / 1575 | 2-pass. Runabout | $250 | |
1907 | B | 1 cyl. | 4 HP | 62 / | 2-pass. Runabout | $275 | |
1907 | C | 2 cyl. | 10 HP | 72 / 1829 | 2-pass. Runabout | $ 400 | |
1907 | C | 2 cyl. | 10 HP | 72 / 1829 | 2-pass. Runabout | $ 400 | |
1908 | B | 1 cyl. | 4 HP | 62 / | 2-pass. Runabout | $275 | |
1908 | C | 2 cyl. | 12 HP | 72 / 1829 | 2-pass. Runabout | $ 400 | |
1908 | C | 2 cyl. | 12 HP | 72 / 1829 | 4-pass. Surrey | $ 500 | |
1908 | C | 2 cyl. | 12 HP | 72 / 1829 | Delivery wagon | $ 500 | |
1909 | C | 2 cyl. | 12 HP | 72 / 1829 | 2-pass. Runabout | $ 400 | |
1909 | D | 2 cyl. | 18 HP | 80 / 2032 | 4-pass. Surrey | $ 450 | |
1909 | E | 2 cyl. | 16 HP | 96 / 2438 | Convertible Runabout | $ 425 | |
1909 | F | 4 cyl. | 24HP | 84 / 2134 | Convertible Runabout | $ 800 | |
Models A and B: air cooled; all others: choice of air or water cooling.
High wheelers had a unique market. They were bought mainly in the countryside where consumers were skeptical of the automobile.
So, these cars had to be simple, easy to maintain and repair, and inexpensive. Sophistication was no criterion. Normally, they were offered for $350–450, like the $375 Black. With a price tag of $250, the Success Model A was one of the cheapest and simplest automobiles available in the U.S.
Later Success vehicles competed with slightly more sophisticated high wheelers, as offered by the Auto-Bug Company ($850), or the George White Buggy.
Few automobile manufacturers yet had a nationwide representative network, or even sold their products in the whole country. Car-building was often a local business, making comparisons difficult. Comparing them with "real" or conventional automobiles is still another challenge, as their building methods, and their construction differed because of their different tasks.
The best-selling American car of the early 1900s was the Oldsmobile Curved Dash that cost $650 through its whole production run, but was nearly as outdated in 1906 as the Success was when introduced: neither had a front-mounted engine or shaft drive, the latter becoming standard at least for smaller cars very soon, and both had single-cylinder engines while even most high-wheelers used twin, and Ford introduced its Model N, a four-cylinder, for only $500 in 1907.
The Overland Automobile Company was an American automobile manufacturer in Toledo, Ohio. It was the founding company of Willys-Overland and one of the earliest mass producers of automobiles.
The Adams Company is an American manufacturing concern. It was founded in 1883 and is based in Dubuque, Iowa, United States.
ABC was an American high wheeler automobile built by Albert Bledsoe Cole in St. Louis, Missouri, USA, from 1905 to 1910.
The Ford Model C is an automobile that was produced by Ford Motor Company. Introduced in late 1904, the Model C was Ford's lower priced 1905 model. The first sales were in October 1904, with most sold during the 1905 calendar year. Horace Dodge made major changes to the design of the engine, rear axle and other parts of the car. The Model C used the same 10 hp motor the 1904 Model A was equipped with. Model C had a longer wheelbase than the earlier Model A. Built at the Ford Piquette Avenue Plant, it was the entry-level car in the Ford model lineup, slotting below the upscale Model B. Production ended in 1905 with approximately 1,000 cars produced. About 160-170 Model C were assembled in Canada at Ford's new Ford Canada location in Walkerville. Due to the Dodge Brothers owning a ten percent share of the company, as well as supplying many parts and assemblies, the Model C took to the road with Dodge-built engines and other key assemblies.
The Ford Model N is an automobile produced by Ford Motor Company; it was introduced in 1906 as a successor to the Models A and C as the company's inexpensive, entry-level line. It was built at the Ford Piquette Avenue Plant.
Velie was a brass era American automobile brand produced by the Velie Motors Corporation in Moline, Illinois from 1908 to 1928. The company was founded by and named for Willard Velie, a maternal grandson of John Deere.
The Knox Automobile Company was a manufacturer of automobiles in Springfield, Massachusetts, United States, between 1900 and 1914. Knox also built trucks and farm tractors until 1924. They are notable for building the very first modern fire engine in 1905, and the first American vehicle with hydraulic brakes, in 1915.
F. B. Stearns and Company, later known as F. B. Stearns Company was an American manufacturer of luxury cars in Cleveland, Ohio marketed under the brand names Stearns from 1900 to 1911 then Stearns-Knight from 1911 until 1929.
Standard Motor Construction Company (1904-1905) was the successor to the U. S. Long Distance Automobile Company (1900-1903) of Jersey City, New Jersey. The American Veteran Era Long Distance automobile was developed into the Standard automobile in 1904.
The Michigan was a brass era automobile built in Kalamazoo, Michigan by the Michigan Automobile Company, Ltd from 1903 to 1907.
The Michigan was a brass era automobile manufactured in Kalamazoo, Michigan from 1904 to 1913 by the Michigan Buggy Company and its subsidiary the Michigan Motor Car Company.
Lincoln Motor Car Works was an automobile company in Chicago, Illinois. It produced cars for Sears Roebuck from 1908 until 1912.
Western Tool Works was an American brass era automobile manufacturer in Galesburg, Illinois. The company made Gale automobiles from 1904 to 1910. Early Gale runabouts were notable for having bodywork hinged at the rear of the car that could be lifted to ease access to the engine, essentially making the entire body the hood.
The Black was an American brass era automobile, built at 124 East Ohio Street, Chicago, Illinois, in 1906.
The Metz Company was a pioneer brass era automobile maker established by Charles Herman Metz in Waltham, Massachusetts, from 1909 to 1922.
The Partin Manufacturing Company was a brass era American automobile manufacturer, headquartered at 29 South LaSalle Street, Chicago, Illinois from 1913 to 1917. The Partin-Palmer automobile and Pioneer cyclecar were produced.
The American Automobile and Power Company was an American Brass Era car manufacturer, incorporated in Sanford, Maine, in 1903. They produced the American Populaire during 1904 and 1905.
Hatfield Motor Vehicle Company was a pioneer brass era American automobile company, built in Miamisburg, Ohio, in 1907 and 1908.
The Jackson Automobile Company was an American Brass Era automobile manufacturer located in and named for Jackson, Michigan. The company produced the Jackson from 1903 to 1923, the 1903 Jaxon steam car and the 1904 Orlo.
The W. H. Kiblinger Company and the W. H. McIntyre Company produced Brass Era automobiles in Auburn, Indiana from 1907 to 1915.