Sydney P-Class Tram

Last updated

P-class
NSWDRTT P-class Tram.jpg
Manufacturer Randwick Tramway Workshops
Meadowbank Manufacturing Company
Walsh Island Dockyard
Constructed1921-29
Number built258
Fleet numbers1480-1737
Capacity80 (Seated)
48 (Standing)
Specifications
Train length13.85 metres
Width2.74 metres
Height3.26 metres
Maximum speed60 km/h
Weight16.9 t
Power output4 x 40 hp
Electric system(s) 600 V DC catenary
Current collector(s) Trolley pole
Track gauge 1,435 mm (4 ft 8+12 in)

The P-class trams were a class of trams operated on the Sydney tram network.

Contents

History

Between 1921 and 1929, 258 P class trams were built by Randwick Tramway Workshops, Meadowbank Manufacturing Company, and the Walsh Island Dockyard. As with the preceding O class trams, the P class were cross bench cars with 80 seat capacity. They were a big improvement over the O-class in that all compartments offered protection from bad weather on both sides of the bodies when running. Fitted with folding canvas doors in each compartment, conductors only had to push open one half of a door. [1]

The P-class trams were based at all depots on the main system except Rushcutters Bay, but worked to the Sydney Stadium, just past the depot between 1947 and 1959 out of Waverley and Dowling Street for special events, plus out to Watsons Bay for picnic specials. Most were withdrawn in 1959/1960. Four (1517 & 1573 at Randwick Tramway Workshops and 1562 & 1582 Eveleigh Railway Workshops) were refitted with the same windows, centre door and internal layout as the R1 class. [1]

Preservation

Six have been preserved:

Related Research Articles

<span class="mw-page-title-main">Trams in Sydney</span> History of the tramway system closed in Sydney NSW Australia

The Sydney tramway network served the inner suburbs of Sydney, Australia, from 1879 until 1961. In its heyday, it was the largest in Australia, the second largest in the Commonwealth of Nations, and one of the largest in the world. The network was heavily worked, with about 1,600 cars in service at any one time at its peak during the 1930s . Patronage peaked in 1945 at 405 million passenger journeys. Its maximum street trackage totalled 291 km in 1923.

<span class="mw-page-title-main">Z-class Melbourne tram</span>

The Z-class are single-unit bogie trams that operate on the Melbourne tram network. Between 1975 and 1983, 230 trams spanning three sub-classes were built by Comeng, Dandenong. The design was based on two similar Gothenburg tram models, and a prototype built by the Melbourne & Metropolitan Tramways Board. While the Z1 and Z2-class trams were very similar, the Z3-class had significant design changes.

<span class="mw-page-title-main">Trams in Australia</span>

The earliest trams in Australia operated in the latter decades of the 19th century, hauled by horses or "steam tram motors". At the turn of the 20th century, propulsion almost universally turned to electrification, although cable trams lingered in Melbourne. In cities and towns that had trams, they were a major part of public transport assets.

<span class="mw-page-title-main">Sydney O-Class Tram</span>

The O-class trams were a class of trams operated on the Sydney tram network.

<span class="mw-page-title-main">Sydney R1-Class Tram</span>

The R1-class trams were a class of trams operated on the Sydney tram network. Their design was a development of the R class.

<span class="mw-page-title-main">Sydney C-Class Tram</span>

The C-class trams were a class of single bogie end-loading electric trams operated on the Sydney tram network.

<span class="mw-page-title-main">Sydney R-Class Tram</span>

The R-class trams were a class of drop-centre saloon car type trams operated on the Sydney tram network.

<span class="mw-page-title-main">Sydney D-Class Tram</span>

The D-class trams were a class of single bogie Californian Combination type trams operated on the Sydney tram network with open cross benches at the ends and a saloon in the centre.

<span class="mw-page-title-main">Sydney Steam Motor Tram</span>

The Sydney Steam Motor Trams were built for and operated by the New South Wales Government Tramways of Australia.

<span class="mw-page-title-main">Sydney E-Class Tram</span>

The E-class trams were a class of single bogie (four-wheel) single-ended cross-bench design trams operated on the Sydney tram network. They always operated in permanently-coupled pairs because they were fitted-out electrically as if the pair was a single bogie car.

<span class="mw-page-title-main">Sydney F-Class Tram</span>

The F-class trams were a class of two-bogie California combination car trams operated on the Sydney tram network with longitudinal seating in the open part of the car. They were later rebuilt as the L-class trams and some again as the L/P-class trams.

<span class="mw-page-title-main">Sydney G-Class Tram</span>

The Sydney G-class Trams were a class of single ended cars were designed to operate either permanently coupled back to back in pairs or singly hauling a trailer on lines with reversing arrangements at the terminii.

<span class="mw-page-title-main">Sydney H-Class Tram</span>

The H-class trams were purpose built single truck, open cross bench cars built at Randwick Tramway Workshops as tourist cars for the City - Bondi Beach/Coogee and City - La Perouse/Botany services.

<span class="mw-page-title-main">Sydney J-Class Tram</span>

The J-class trams were built as replacements for the King Street to Ocean Street, Edgecliff cable line designed to provide a frequent schedule, but with a lower seating capacity. Some briefly operated on the Manly lines in 1911. Withdrawals commenced in 1934 with the entry of the R Class trams, with all out of service by 1936.

<span class="mw-page-title-main">Sydney K-Class Tram</span>

The K-class trams were a single truck all crossbench design, with closed compartments at one end and open seating at the other operated on the Sydney tram network. Withdrawals commenced in 1939. By 1949, only 1295 and 1296 remained in service on the Neutral Bay line, being withdrawn in the mid-1950s. Two were sold as track scrubbers in 1959 to Melbourne.

<span class="mw-page-title-main">Sydney M-Class Tram</span>

The M-class trams were built by the Randwick Tramway Workshops for use on tourist services on the Sydney tram network to replace two modified G class trams. Originally allocated to Fort Macquarie Tram Depot, they later moved to Newtown and again to Ultimo before being scrapped in 1941.

<span class="mw-page-title-main">Sydney N-Class Tram</span>

The N-class trams were a crossbench design of tram with a two-bogie design, each pair of benches had doors at each side.

<span class="mw-page-title-main">Randwick Bus Depot</span>

Randwick Bus Depot is a bus depot in the Sydney suburb of Randwick operated by Transdev John Holland.

<span class="mw-page-title-main">M-class Melbourne tram</span>

The M-class was a class of 17 trams built by Duncan & Fraser, Adelaide for the Hawthorn Tramways Trust (HTT) as numbers 1 to 10, and 33 to 39. All passed to the Melbourne & Metropolitan Tramways Board on 2 February 1920 when it took over the Municipal Tramway Trusts, becoming the M-class and being renumbered 107 to 116, and 183 to 189.

<span class="mw-page-title-main">P-class Melbourne tram</span>

The P-class was a class of eight trams built by Duncan & Fraser, Adelaide for the Hawthorn Tramway Trust (HTT) as numbers 25 to 32. All passed to the Melbourne & Metropolitan Tramways Board on 2 February 1920 when it took over the HTT becoming the P-class and being renumbered 131 to 138.

References

  1. 1 2 MacCowan, Ian (1990). The Tramways of New South Wales. Oakleigh: Ian MacCowan. pp. 129–131. ISBN   0-949600-25-3.
  2. 1 2 3 "Sydney Tramway Museum Fleet Register" (PDF). Sydney Tramway Museum. Archived from the original (PDF) on 10 June 2015. Retrieved 28 July 2021.
  3. "SYDNEY TRAMWAYS 1700". Seashore Trolley Museum . Retrieved 28 July 2021.

Further reading

Commons-logo.svg Media related to Sydney P-Class Tram at Wikimedia Commons