Teesside Beam Mill

Last updated

Teesside Beam Mill
Teesside Beam Mill - geograph.org.uk - 1730598.jpg
Teesside Beam Mill
Teesside Beam Mill
Built1954–1958
Location Lackenby, North Yorkshire, England
Coordinates 54°35′17″N1°08′06″W / 54.588°N 1.135°W / 54.588; -1.135
IndustrySteel
Products I-Beams
Employees400 (2023)
Volume750,000 tonnes (830,000 tons) (2006)
Owner(s) British Steel

Teesside Beam Mill (TBM) is a steel reheating and rolling plant located at Lackenby, on Teesside, North Yorkshire, England. The plant was set up in the 1950s by the Dorman Long company and began full production in 1958, making beams for building projects. The plant produces around 750,000 tonnes (830,000 tons) of steel products per year, and is the United Kingdom's only producer of large steel sections for the building industry.

Contents

History

The Teesside Beam Mill [note 1] was developed after the Second World War, on a strip of land at Lackenby, sandwiched between the Middlesbrough to Redcar railway line to the north, and the A1085 trunk road to the south. The narrow land measured 680 acres (280 ha) across, providing some 2,215 acres (896 ha) in total, with the buildings arranged diagonally between the two transport modes so as maximise land space. [3] Groundwork for the beam plant was started by Dorman Long in 1954, with the mill being built from 1955 onwards. [4] The mill was completed in 1958, with an eventual cost of £18 million. [5] [6] It was built adjacent to the Lackenby steel plant to enable steel ingots to be shipped in to the facility from the open-hearth plant next door, [7] and was opened by Alexander Fleck who was chairman of ICI (ICI had a new plant under construction at nearby Wilton). [8]

Originally the plant rolled steel for the bridge building industry, but later the plant specialised in beams for the construction industry. [9] Its first project was to supply steel beams of 75 feet (23 m) length for the Catterick Bypass of the A1 road in North Yorkshire, in 1958. [10] Another of its earlier projects was to supply high-tensile beams between 45 feet (14 m) and 60 feet (18 m) long for the Gladesville Bridge over the Paramatta River in New South Wales (just upstream from Sydney Harbour Bridge. It was the first time that beams of that length had been rolled in that type of steel. [11] By the 21st century, the beam mill was the only plant in the United Kingdom capable of producing large steel sections for the building and construction industry. [12] [13]

The merger of British Steel and Hoogovens to form Corus was completed by 1999, and in the first year of operation, the Teesside Cast Products (TCP) business lost money, so a restructuring programme was initiated, but this did not include the TBM, and management of the mill was aligned away from TCP under the Scunthorpe operations. [14] By the early 2000s, the plant was taking semi-finished steel from either the Teesside or Scunthorpe Steelworks, melting it at a temperature of 1,300 °C (2,370 °F), to make I-beams (girders) for the construction industry. [15] Ingots ranging in weight from 5.6–21.3 tonnes (6.2–23.5 tons) are brought to temperature and rolled in a primary mill, these are then sent to a roughing and finishing mill, before being hot sawn to the customers required length, and then coolled. [16] Since the closure of the adjacent Teesside Steelworks at Redcar, the Scunthorpe plant some 120 kilometres (75 mi) to the south has sent semi-finished steel to TBM via train, [17] though some slab deliveries from Scunthorpe had started in the early 2000s. [18] [note 2]

The plant produced 1,000,000 tonnes (1,100,000 tons) of girders in 1960, 520,000 tonnes (570,000 tons) in 1969 and 1977, 600,000 tonnes (660,000 tons) in 1989, and 750,000 tonnes (830,000 tons) in 2006. [16] [20] [21] [22] [15] In 2023 the plant had around 400 people working there. [23] [24] A new reheat furnace was built at the plant between 1984 and 1985, costing £17 million (equivalent to £65,059,000in 2023), and the whole plant was modernised in the late 1980s at a cost of £69 million (equivalent to £216,830,000in 2023), [25] and a new high technology mill was completed in the summer of 1991. The new process in the mill reduced lead-in time for the creation of new beams from 18 hours to three hours. [26]

Notable uses of TBM steel

Owners

Future

Steel from Scunthorpe in Tees Yard 66087 In Tees Yard sidings with a Steel train from Scunthorpe.jpg
Steel from Scunthorpe in Tees Yard

British Steel have put forward a proposal to take green hydrogen to power the plant instead of natural gas. This is projected to commence in 2024, with the hydrogen being produced nearby on Teesside. [39] The TBM plant requires an energy consumption of 1.8 gigajoules (500 kWh) per 1-tonne (1.1-ton) of steel rolled, which needs 45.6 cubic metres (1,610 cu ft) of natural gas, releasing 2.02 kilograms (4.5 lb) of carbon into the atomosphere. [40]

The owners of the Teesside Beam Mill, British Steel, announced in November 2023 their intention to stop making primary steel using the basic oxygen process at their Scunthorpe plant, and instead to utilise two Electric arc furnaces (EAF) to produce semi-finished steel from scrap metal. One of these EAF plants would be built adjacent to Teesside Beam Mill and would be used to supply the feedstock metal for the TBM and another British Steel plant at Skinningrove. [41] [42] This would mean the closure of the Scunthorpe plant with the loss of 2,000 jobs, and the cessation of semi-finished steel from Lincolnshire through to Teesside on freight trains, as the primary metal for the beam mill would be sourced from the adjacent plant EAF located nearby. [43] In April 2024, the EAF plant was given the go-ahead, with a view to being operational in 2025. [44] The EAF plant is slated to be 210 feet (64 m) tall, and cover an area of 370,000 square feet (34,000 m2). [45]

Notes

  1. ↑ The beam mill is a downstream process plant; raw steel used to be carried to an adjacent plant on an internal railway from Redcar Steel making plant, which was a smelter, or primary steelworks. This was then taken to the TBM as ingots to be rolled into beams. [1] [2]
  2. ↑ The steelworks at Redcar ceased producing steel for Corus in 2007. This plant was the primary source for raw steel for the TBM. When SSI re-lit the furnaces at Redcar to restart the steelmaking process in April 2012, their products were destined for elsewhere. Corus, later Tata, then British Steel, supplied the TBM from their plant at Scunthorpe. [19]

Related Research Articles

<span class="mw-page-title-main">Redcar and Cleveland</span> Borough in North Yorkshire, England

Redcar and Cleveland is a unitary authority area with borough status in the ceremonial county of North Yorkshire, England. Its council has been a unitary authority since 1996.

<span class="mw-page-title-main">Redcar</span> Town in North Yorkshire, England

Redcar is a seaside town on the Yorkshire Coast in the Redcar and Cleveland unitary authority. It is in the ceremonial county of North Yorkshire, England, and is located 7 miles (11 km) east of Middlesbrough.

<span class="mw-page-title-main">Teesside</span> Conurbation in England

Teesside is a built-up area around the River Tees in North East England, split between County Durham and North Yorkshire. The area contains the towns of Middlesbrough, Stockton-on-Tees, Billingham, Redcar, Thornaby-on-Tees, and Ingleby Barwick. Teesside's economy was once dominated by heavy manufacturing until deindustrialisation in the latter half of the 20th century. Chemical production continues to contribute significantly to Teesside's economy.

Tata Steel Limited is an Indian multinational steel-making company, based in Jamshedpur, Jharkhand and headquartered in Mumbai, Maharashtra. It is a part of the Tata Group.

<span class="mw-page-title-main">Tata Steel Europe</span> Multinational steelmaking company

Tata Steel Europe Ltd. was a steelmaking company headquartered in London, England, with its main operations in the United Kingdom and the Netherlands. The company was created in 2007, when Tata Group took over the British-Dutch Corus Group.

<span class="mw-page-title-main">Dorman Long</span> British steel company

Dorman Long & Co was a UK steel producer, later diversifying into bridge building. The company was once listed on the London Stock Exchange.

Edward Thomas Judge (c.1909–1992) was an English engineer and industrialist. For most of his career he worked at steel and bridge company Dorman Long, and later he was President of the British Iron and Steel Federation.

<span class="mw-page-title-main">NSB Di 8</span>

The NSB Di 8 is a class of diesel-electric locomotives built by Maschinenbau Kiel (MaK), while it was part of Siemens Schienenfahrzeugtechnik, for the Norwegian State Railways (NSB). The locomotives are equipped with a Caterpillar 3516 DI-TA prime mover, which provides a power output of 1,570 kilowatts (2,110 hp) and a starting tractive effort of 270 kilonewtons (61,000 lbf).

<span class="mw-page-title-main">Tata Steel Netherlands</span> Former Dutch steel company

Koninklijke Hoogovens known as Koninklijke Nederlandse Hoogovens en Staalfabrieken (KNHS) until 1996 or informally Hoogovens. was a Dutch steel producer founded in 1918. Since 2010, the plant is named Tata Steel IJmuiden.

<span class="mw-page-title-main">Port Talbot Steelworks</span> Steel production plant in Port Talbot, Wales

Port Talbot Steelworks is an integrated steel production plant in Port Talbot, Wales, capable of producing nearly 5 million tonnes of steel slab per annum. This makes it the larger of the two major steel plants in the United Kingdom and one of the largest in Europe. Over 4,000 people work at the plant.

<span class="mw-page-title-main">Teesside Steelworks</span>

The Teesside Steelworks was a large steelworks that formed a continuous stretch along the south bank of the River Tees from the towns of Middlesbrough to Redcar in North Yorkshire, England. At its height there were 91 blast furnaces within a 10-mile radius of the area. By the end of the 1970s there was only one left on Teesside. Opened in 1979 and located near the mouth of the River Tees, the Redcar blast furnace was the second largest in Europe.

<span class="mw-page-title-main">Fire and Steel Festival</span> Festival in Redcar, North Yorkshire

Fire and Steel Festival was a one-day festival held in Redcar, North Yorkshire, set against the background of the industrial furnace of the largest steelworks in Europe and Redcar’s coast line.

<span class="mw-page-title-main">GEC Stephenson locomotive</span>

The GEC Stephenson locomotives are a type of heavy industrial shunter built in the 1970s by British industrial company GEC Traction. The locomotives were used for heavy shunting tasks in UK industrial sites for clients including British Steel Corporation and the National Coal Board.

<span class="mw-page-title-main">Scunthorpe Steelworks</span> Industrial complex in northern England

The Iron and Steel Industry in Scunthorpe was established in the mid 19th century, following the discovery and exploitation of middle Lias ironstone east of Scunthorpe, Lincolnshire, England.

<span class="mw-page-title-main">Materials Processing Institute</span> Research centre in the Tees Valley, England

The Materials Processing Institute is a research centre serving organisations that work in advanced materials, low-carbon energy and the circular economy. The Institute is based in Tees Valley in the northeast of England.

Skinningrove steelworks is a steel mill in Skinningrove, North Yorkshire, England. The business was formed in 1874 as the Loftus Iron Company, after a liquidation of the company reformed in 1880 as the Skinningrove Iron Company. The works expanded from producing only pig iron to include steel production in the early 20th century, with mills specialising in long products including railway rail. As part of the business the company constructed a jetty at Skinningrove, and owned an ironstone mine in Loftus.

Sogerail is a rail manufacturer near Hayange, in the Lorraine region of France. Since the 19th century, its products have been used by various railways across Europe as well as various overseas customers.

<span class="mw-page-title-main">British Steel (2016–present)</span> Steel manufacturer founded in 2016

British Steel Limited is a long steel products business founded in 2016 with assets acquired from Tata Steel Europe by Greybull Capital, then acquired by Jingye Group in 2020. The primary steel production site is Scunthorpe Steelworks, with rolling facilities at Skinningrove Steelworks, Teesside.

<span class="mw-page-title-main">Redcar Bulk Terminal</span> Deep sea East Coast port in Redcar and Cleveland, Northern England

Redcar Bulk Terminal (RBT), also known as Redcar Ore Terminal, is a privately run dock at the mouth of the Tees Estuary in North Yorkshire, England. The port is used for the transhipment of coal and coke and for many years was the import dock for iron ore destined for Redcar Steelworks under British Steel Corporation, British Steel plc, Corus, Tata Steel Europe and Sahaviriya Steel Industries.

<span class="mw-page-title-main">Sheerness Steelworks</span>

Sheerness Steelworks was a steel plant located at Sheerness, on the Isle of Sheppey, in Kent, England. The plant opened in 1971 and produced steel via the Electric Arc Furnace (EAF) method rather than as a primary metal by the smelting of iron ore. The plant has closed down twice in its history; first in 2002 and again in 2012. Current owners Liberty House, had announced plans to re-open part of the site in 2016.

References

  1. ↑ "Energy use in the steel industry" (PDF). worldsteel.org. April 2021. p. 2. Retrieved 4 July 2024.
  2. ↑ Cowburn 2016, p. 17.
  3. ↑ Cowburn 2016, p. 5.
  4. ↑ "Teesside Beam Mill marks 60th anniversary by investing in the future". britishsteel.co.uk. 22 May 2018. Retrieved 10 November 2023.
  5. ↑ "Dorman Long Expansion". The Times. No. 53987. 1 November 1957. p. 16. ISSN   0140-0460.
  6. ↑ House, John W.; Fullerton, Brian (1960). Tees-side at mid-century: an industrial and economic survey. London: MacMillan. p. 212. OCLC   5704897.
  7. ↑ Cowburn 2016, pp. 7, 9.
  8. ↑ Judge, Edward Thomas (1992). Dorman Long: a concise history. Brian Goodyear. p. 11. OCLC   1128419976.
  9. ↑ "Job losses at Teesside steelworks". BBC News. 20 May 2011. Retrieved 11 November 2023.
  10. 1 2 "Rolling Europe's largest beam". The Manchester Guardian. No. 34, 767. 11 April 1958. p. 8. ISSN   0261-3077.
  11. 1 2 Baxter, J. W; Gee, A. F; James, H. B (March 1965). "Gladesville Bridge". Proceedings of the Institution of Civil Engineers. 30 (3): 515. doi:10.1680/iicep.1965.9523.
  12. 1 2 Pidd, Helen; Murray, Jessica (29 May 2019). "Redcar: how the end of steel left a tragic legacy in a proud town". The Guardian. Retrieved 11 November 2023.
  13. 1 2 Tighe, Chris; Rovnick, Naomi; Gross, Anna; Bounds, Andy (24 May 2019). "How British Steel's demise may destroy communities" . Financial Times. Retrieved 11 November 2023.
  14. 1 2 Cowburn 2016, p. 23.
  15. 1 2 "Teeside [sic] Beam Mill Case study: Marking" (PDF). ibrary.e.abb.com. Retrieved 10 November 2023.
  16. 1 2 "BSC's Finishing Facilities - ProQuest". Steel Times International. 206 (6). Redhill: Quartz Business Media Ltd: 54–55. June 1978. ISSN   0143-7798. ProQuest   1365687135.
  17. ↑ Cattermole et al 2022, p. 10.
  18. ↑ Cowburn 2016, p. 54.
  19. ↑ Cowburn 2016, p. 3.
  20. ↑ "New Mill Output Grows". The Times. No. 55189. 18 September 1961. p. 18. ISSN   0140-0460.
  21. ↑ Images of Teesside. Derby: Breedon. 1998. p. 11. ISBN   1859831133.
  22. ↑ "British Steel". Iron and Steel Engineer. 67. Pittsburgh: Association of Iron and Steel Engineers: 37. 1990. ISSN   0021-1559. OCLC   1753960.
  23. ↑ Jones, Leigh (16 September 2023). "Job cuts expected despite £500m government deal on steelworks". The Yorkshire Post. p. 2. ISSN   0963-1496.
  24. ↑ Hughes, Mike (4 October 2022). "Everything we know as British Steel 'rescue talks' leads to fears over hundreds of North East jobs". The Northern Echo. Retrieved 1 July 2024.
  25. ↑ Sadler, David (March 1990). "Privatising British Steel: The Politics of Production and Place". Area. 22 (1). Royal Geographical Society: 52. ISSN   0004-0894.
  26. ↑ Kanji, Gopal K. (1996). Total quality management in action. London: Chapman & Hall. p. 192. ISBN   9780412782206.
  27. ↑ McLauchlan, Karen (4 October 2011). "£1.5m for Lackenby". The Middlesbrough Evening Gazette. p. 10. ISSN   1367-0603.
  28. ↑ "Hope of saving steel jobs". The Newcastle Journal. 12 August 2009. p. 25. ISSN   0307-3645.
  29. ↑ Tighe, Chris; Pooler, Michael (15 September 2016). "British Steel signs deal to supply two new London skyscrapers" . Financial Times. Retrieved 10 November 2023.
  30. 1 2 Price, Kelley (22 May 2018). "Steel mill that helped transform the world's skyline has turned 60". Teesside Live. Retrieved 11 November 2023.
  31. ↑ King, Ian (5 December 2009). "Corus says lack of state support is to blame for Teesside mothballing". The Times. No. 69811. p. 69. ISSN   0140-0460.
  32. ↑ "Doubts remain over steel jobs". BBC News. 24 September 2003. Retrieved 11 November 2023.
  33. ↑ Harrison, Michael (31 January 2007). "Tata buys steel giant Corus for £6.2bn". The Independent. Retrieved 4 May 2024.
  34. ↑ Burn, Chris (14 September 2017). "Campaigners call on MPs to intervene in steel pensions". The Yorkshire Post. p. 1. ISSN   0963-1496.
  35. ↑ Farrell, Sean (1 June 2016). "Tata completes sale to Greybull, saving jobs and reviving British Steel". The Guardian. Retrieved 1 July 2024.
  36. ↑ Lea, Robert (1 July 2024). "British Steel returns as Tata sells works for £1" . The Times. Retrieved 1 July 2024.
  37. ↑ Jolly, Jasper (11 November 2019). "British Steel to be sold to Chinese firm in deal that could save 4,000 jobs". The Guardian. Retrieved 1 July 2024.
  38. ↑ "British Steel: Takeover by Chinese firm completed". BBC News. 8 March 2020. Retrieved 1 July 2024.
  39. ↑ Cattermole et al 2022, pp. 1–3.
  40. ↑ Cattermole et al 2022, p. 3.
  41. ↑ Walker, Martin (7 November 2023). "How Teesside will play key role in British Steel's green ambitions". Tees Business. Retrieved 10 November 2023.
  42. ↑ "Steelmaking to Return to Teesside Under Plans For Electric Arc Furnace". Tees Valley. 6 November 2023. Retrieved 2 May 2024.
  43. ↑ Burgess, Tom (10 November 2023). "British Steel unveils electric arc furnace plan for Teesside". Darlington & Stockton Times. No. 2023–45. p. 63. ISSN   2516-5348.
  44. ↑ "British Steel Redcar electric arc furnace gets planning permission". BBC News. 4 April 2024. Retrieved 2 May 2024.
  45. ↑ Arnold, Stuart (3 April 2024). "'Over the moon': Planning approval given for return of steelmaking to Teesside". Teesside Live. Retrieved 2 May 2024.

Sources

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.