Port Talbot Steelworks | |
---|---|
Industry | Steelmaking |
Employees | around 2,000 |
Owner(s) | Tata Steel |
Port Talbot Steelworks is a steel mill in Port Talbot, Wales. Over 4,000 people worked at the plant until the last blast furnace closed in October 2024. Around 2,000 employees remain after this time, processing imported steel slabs to produce rolled steel products. [1] [2] The mill is in the process of building a 320-ton capacity electric arc furnace which would be operational in late 2027. [3]
The majority of the steel slabs produced before September 2024 was rolled on-site at Port Talbot and at the Newport Llanwern site to make a variety of steel strip products. The remainder was processed at other Tata Steel plants or sold in slab form. After September 2024 imported steel slabs are used as inputs at those rolling plants.
The works covers a large area of land which dominates the east of the town. Its two inactive blast furnaces [4] and steel production plant buildings are major landmarks visible from both the M4 motorway and the South Wales Main Line when passing through the town.
The site at Margam is made up of a number of plants across a large site, developed since 1901.
The original works were built by Gilbertson, and situated south of Port Talbot railway station. Constructed in 1901–5, the works was named after Christopher Rice Mansel Talbot of Margam Castle, the principal sponsor of the developments at Port of Port Talbot, which had opened in 1837.
The site was closed in 1961 and demolished in 1963. The General Offices housed Port Talbot magistrates' court until 2012, but the rest of the site is an industrial estate. [5]
Steelmaking at the Port Talbot complex began with the Margam Iron and Steel Works, completed between 1923 and 1926.
Abbey Steelworks was planned in 1947, but today is correctly termed Tata Steel Strip Products UK Port Talbot Works. It is believed to be named after the Cistercian Margam Abbey that used to be on the site – a small amount of the original building still stands (protected) within the site that survived the dissolution of the monasteries. Several steel manufacturers in South Wales pooled their resources to form the Steel Company of Wales, to construct a modern integrated steelworks on a site then owned by Guest, Keen and Baldwins. However, political manoeuvring led to tinplate production being retained in its original heartland further west, at two new works in Trostre and Felindre. The steelworks were built upon 32,000 piles into sand and peat. [6] [7] Opened in 1951, it was fully operational by 1953. [8] [9]
Once the new No.4 and 5 furnaces began production, the older furnaces, numbers 1 and 2 built in the 1920s, were demolished. No.3 furnace, built in 1941, was retained and used as a stand-by, until demolished in the mid-2000s. [10] At the time of peak employment in the 1960s, the Abbey Works was Europe's largest steelworks and the largest single employer in Wales, with a labour force of 18,000. [11]
In 1967, The Steel Company of Wales was nationalised and absorbed into British Steel Corporation, which was subsequently privatised and merged with Hoogovens to form Corus Group. Tata Group agreed to purchase all Corus' ordinary shares in March 2007, and the deal was concluded in April 2007. In 2010 it was announced that Corus was to be rebranded to the group name of Tata Steel Europe.
It is an integrated steelmaking site using imported ore and coal; together with Llanwern steelworks, the plants produce up to 3.5 million tonnes of hot rolled and cold rolled annealed steel coils per annum, for a variety of different end uses. Output is taken by rail from Margam Knuckle Yard to Shotton for coating, Trostre for tinplating, or direct to the Midlands for the motor industry and domestic goods.
Tata Steel announced on 30 March 2016 it may pull out of its UK operations, including Port Talbot. It provided as reasons "imports of Chinese steel, high energy costs and weak demand ". [12] "Plans to save the steelworks were put on hold when potential buyers indicated their intention to withdraw from the bidding process due to the UK voting in favour of withdrawing from the EU" . [13] However, in spite of the Brexit result and warnings from industry and elsewhere that leaving the EU could have a disruptive effect on UK steel, following the vote Tata recommitted to the plant. [14] [15] The UK Government said it "remains committed to supporting a sustainable, long-term future for steel making in the UK".
In September 2023 the UK Government agreed to pay Tata a £500 million subsidy in order for it to invest in an electric arc furnace. This was in a bid to cut emissions resulting from the carbon-intensity of the current blast furnaces. Trade unions worried that the increased autonomy of the electric arc furnace would lead to job losses. Unions presented the firm with a plan to keep one of the two blast furnaces open until 2032 in order to minimise job losses. The firm rejected the plan, announcing in January 2024 that they would close both blast furnaces, putting 3,000 jobs at risk. [2] [16]
With Tata being the largest private employer in Port Talbot, concerns have been raised regarding the future economic health of the town. [2]
There has been controversy among some commentators around the causes behind Tata choosing to close the blast furnaces in 2024 as opposed to accepting the proposal from unions to keep them open as the plant transitioned to more environmentally friendly methods of production. Many commentators have blamed Net Zero targets. [17] However, Labour former Welsh First Minister Carwyn Jones pointed to the UK's decision to leave the EU as a factor, stating that the uncertainty caused by Brexit resulted in reluctance to invest in the plant and had made it less competitive and less viable as a business, highlighting that Tata was retaining blast furnace operations in the Netherlands and choosing to close them in the UK. [18] Figures from the steel industry had for some time been warning that leaving the EU would have a negative impact on UK steel, [19] and Stephen Kinnock, Port Talbot's MP, had also warned prior to the referendum that the UK choosing to leave the EU would be "a disaster" for the UK's steel industry. [20] The negative impact from Brexit as a result of uncertainty and lower EU customer orders was cited as one of the reasons behind the liquidation of British Steel, previously owned by Tata, prior to the UK even leaving the EU. [21] Following the UK's departure from the EU and the implementation of the EU–UK Trade and Cooperation Agreement, UK steel exports to the EU dropped significantly [22] and high-profile industry figures spoke out about the impact the TCA, which imposed some tariffs and quotas on UK steel exports, was having on UK steel. [23] British Steel had also made a submission to the UK Parliament highlighting the importance of the EU market, which according to their figures accounted for 70% of UK steel exports, urging them to revise the TCA. [24] Tata themselves also acknowledged that Brexit had increased their operating costs, estimating that it had added around 15% to the cost of transport and processing. [25]
Tata Steel also received criticism for stating environmental reasons were behind their decision to close the blast furnaces at Port Talbot due to their construction of new blast furnaces in India. [26]
There have been many fatalities caused by industrial accidents at the plant since its opening, the number having been reduced over the years by improved safety measures.
An explosion at the Port Talbot plant in November 2001 killed three men. [27] Len Radford, 53, Stephen Galsworthy, 25, and Andrew Hutin, 20, died when blast furnace five erupted, sending molten liquid down on them. Twelve other men were seriously injured in the blast. [27] [28] The blast heavily damaged No.5, which was rebuilt and resumed operation from 2003 onwards. [29]
In July 2012 Tata Steel were fined £500,000 over the 2006 death of worker Kevin Downey at the Port Talbot plant. [27] Engulfed in steam during a night shift, Downey wandered into a channel of molten slag heated to 1500 °C (2700°F). He was rescued by colleagues, but suffered 85% burns and died later that day. At the time of the accident, the Port Talbot plant was still controlled by Corus Steel UK. [27]
In 2019 a contractor was killed while servicing machinery at the plant. [30]
Port Talbot is a town and community in the county borough of Neath Port Talbot, Wales, situated on the east side of Swansea Bay, approximately eight miles from Swansea. The Port Talbot Steelworks covers a large area of land which dominates the south east of the town. It is one of the biggest steelworks in the world, but has been under threat of closure since the 1980s. The population was 31,550 in 2021, comprising about a fifth of the 141,931 population of Neath Port Talbot.
Tata Steel Limited is an Indian multinational steel-making company, based in Jamshedpur, Jharkhand and headquartered in Mumbai, Maharashtra. It is a part of the Tata Group.
Margam is a suburb and community of Port Talbot in the Welsh county borough of Neath Port Talbot, Wales, close to junction 39 of the M4 motorway. The community had a population of 3,017 in 2011; the built up area being larger and extending into Taibach community.
Tata Steel Europe Ltd. was a steelmaking company headquartered in London, England, with its main operations in the United Kingdom and the Netherlands. The company was created in 2007, when Tata Group took over the British-Dutch Corus Group.
Felindre is a rural village in southern Wales. Felindre is located in the far north of Swansea, in the electoral ward of Mawr.
Koninklijke Hoogovens known as Koninklijke Nederlandse Hoogovens en Staalfabrieken (KNHS) until 1996 or informally Hoogovens. is a Dutch steel producer founded in 1918. Since 2010, the plant is named Tata Steel IJmuiden.
The Port of Port Talbot is located on the River Afan estuary next to Port Talbot Steelworks in the industrial town of Port Talbot, South Wales. The whole basin complex covers about 500 acres (2.0 km2), consisting of: an inner set of floating docks, developed from 1834 onwards; and an outer tidal basin, completed in 1970. Owned and operated by Associated British Ports, the tidal basin has the deepest berthing facilities in the Severn estuary and is one of only a few harbours in the UK capable of handling Capesize vessels of up to 170,000 tonnes deadweight (DWT), mostly for the import of iron ore and coal for use by nearby Port Talbot Steelworks.
The Steel Company of Wales Ltd was a Welsh steel and tinplate producer. It was formed in 1947 and absorbed into British Steel Corporation in 1967, British Steel then merged with Hoogovens and became Corus UK Limited. The business now forms part of Tata Steel Europe.
The Teesside Steelworks was a large steelworks that formed a continuous stretch along the south bank of the River Tees from the towns of Middlesbrough to Redcar in North Yorkshire, England. At its height there were 91 blast furnaces within a 10-mile radius of the area. By the end of the 1970s there was only one left on Teesside. Opened in 1979 and located near the mouth of the River Tees, the Redcar blast furnace was the second largest in Europe.
Corus Rugby Football Club was a Welsh rugby union clubs based in Port Talbot. It is now known as Tata Steel RFC, the club is a member of the Welsh Rugby Union and is a feeder club for the Ospreys.
Llanwern steelworks is located in Llanwern, east of the City of Newport, South Wales.
Ebbw Vale Steelworks was an integrated steel mill located in Ebbw Vale, South Wales. Developed from 1790, by the late 1930s it had become the largest steel mill in Europe. It was nationalised after World War II. As the steel industry changed to bulk handling, iron and steel making was ceased in the 1970s, and the site was redeveloped as a specialised tinplate works. It was closed by Corus in 2002, but is being redeveloped in a joint partnership between Blaenau Gwent Council and the Welsh Government.
Margam Knuckle Yard is a railway yard in Margam, South Wales, on the South Wales Main Line, operated by DB Schenker Rail (UK). The yard is the major freight yard of the region, handling all of the rail freight movements from Port Talbot Steelworks, and most of the railfreight traffic around South Wales.
The Iron and Steel Industry in Scunthorpe was established in the mid 19th century, following the discovery and exploitation of middle Lias ironstone east of Scunthorpe, Lincolnshire, England.
Trostre Steelworks is a tinplate manufacturing facility located in Pemberton, Carmarthenshire, just outside Llanelli, West Wales. Planned by the Steel Company of Wales in 1947, today it is part of Tata Steel Europe's infrastructure.
Skinningrove steelworks is a steel mill in Skinningrove, North Yorkshire, England. The business was formed in 1874 as the Loftus Iron Company, after a liquidation of the company reformed in 1880 as the Skinningrove Iron Company. The works expanded from producing only pig iron to include steel production in the early 20th century, with mills specialising in long products including railway rail. As part of the business the company constructed a jetty at Skinningrove, and owned an ironstone mine in Loftus.
Sogerail is a rail manufacturer near Hayange, in the Lorraine region of France. Since the 19th century, its products have been used by various railways across Europe as well as various overseas customers.
British Steel Limited is a long steel products business founded in 2016 with assets acquired from Tata Steel Europe by Greybull Capital, then acquired by Jingye Group in 2020. The primary steel production site is Scunthorpe Steelworks, with rolling facilities at Skinningrove Steelworks, Teesside.
Redcar Bulk Terminal (RBT), also known as Redcar Ore Terminal, is a privately run dock at the mouth of the Tees Estuary in North Yorkshire, England. The port is used for the transhipment of coal and coke and for many years was the import dock for iron ore destined for Redcar Steelworks under British Steel Corporation, British Steel plc, Corus, Tata Steel Europe and Sahaviriya Steel Industries.
The manufacturing sector in Wales was historically centred on the mining industry, with slate, coal, tinplate and steel being important industries. Today, while traditional industries remain in smaller quantities, manufacturing in Wales is increasingly specialised and diverse, including parts of the automotive, aerospace, medical and technological industries.
Tata blames cheap imports of Chinese steel, high energy costs and weak demand