VR Class Vk4

Last updated
VR Class Vk4
Borsig-Leena.jpg
VR Class Vk4 steam locomotive no. 68 at the Finnish Railway Museum
Type and origin
Power typeSteam
Builder Borsig Lokomotiv Werke (AEG)
Order number7268 and 7858
Build date1909-1910
Total produced2
Specifications
Configuration:
   Whyte 0-4-0T
Gauge 1,524 mm (5 ft)
Length6.6 m
Loco weight18 tonnes (18 long tons; 20 short tons)
Fuel typeCoal or wood
Career
Numbers68
Nicknames“Leena”
First run1909
Withdrawn1967
Disposition68 Finnish Railway Museum

The locomotive that came to form VR Class Vk4 was originally one of a pair of 0-4-0T locomotives ordered from Rheinmetall Borsig Lokomotiv Werke (AEG), Germany to work at Ino fortress at Terijoki on the Karelian Isthmus. [1] The locomotives had 2 axles, they were the wet-steam type, and used a slip-Walschaert valve gear. Production numbers and years were 7268/1909 and 7858/1910. [1] The fortress was in Finnish hands when Finland became independent.

The fortress was not needed after the Treaty of Tartu in 1920. [1] It was therefore decided to cancel the order for the locomotives. But this was not possible so it was decided to use the locomotives in the dismantling of the fortress. In 1919, the second locomotive, 7858/1910, was sold to as an industrial locomotive. [1] The first locomotive continued to work dismantling the fort until 1922 when it was acquired by a building company in Hanko. After this the locomotive was sold to Enqvist Ltd Ab, Tampere who scrapped it in 1951. [1]

The second locomotive was purchased by the VR Kuopio depot and given the running number 68. The locomotive was still running in the 1960s. The locomotive was used until 1962 and finally withdrawn in 1967. [1] In the early 1980s it was restored externally and placed in the Kuopio locomotive shed. It was discovered in 1986 by Savo Steam Transport Museum. Unfortunately, the museum project floundered and the locomotive was plinthed outside a restaurant. [1]

In 2008 it was decided to restore the locomotive. On 24 March 2009, the locomotive was moved to Hyvinkää workshop, where ultrasound measurements were taken. [1] The final restoration was carried out by ABB Services and the Jokioinen Museum Railway, where the locomotive arrived on 8 May 2009. The locomotive was presented to the public on 17 June 2010. [2]

The locomotive is currently situated at the Finnish Railway Museum, and is steamed up several times every summer.

Related Research Articles

<span class="mw-page-title-main">VR Group</span> State-owned railway company in Finland

VR-Group Plc, commonly known as VR, is a government-owned railway company in Finland. VR's most important function is the operation of Finland's passenger rail services with 250 long-distance and 800 commuter rail services every day. With 7,500 employees and net sales of €1,251 million in 2017, VR is one of the most significant operators in the Finnish public transport market area.

<span class="mw-page-title-main">Jokioinen Museum Railway</span> Railway line in Finland

The Jokioinen Museum Railway is located in Jokioinen, Finland. It is located on the last operating commercial narrow gauge railway in Finland, the 750 mm gauge Jokioinen Railway.

The history of rail transport in Finland began on January 31, 1862, with the opening of the railway line between Helsinki and Hämeenlinna. By 1900 most of the future main lines had been constructed, including the line to St. Petersburg. By the time of the birth of the new Finnish Republic in 1917 lines connected all major cities, major ports, and reached as far as the Swedish border, and inner Finland as far north as Kontiomäki in Paltamo region, as well as eastwards into Karelia.

<span class="mw-page-title-main">Jokioinen Railway</span>

The Jokioinen Railway located in Jokioinen, Finland, was opened for temporary traffic on December 9, 1898. On October 25 1899, the railway began permanent passenger and freight services.

<span class="mw-page-title-main">VR Class Tk3</span>

The Finnish VR Class Tk3 was a 2-8-0 light freight locomotive. It was the most numerous steam locomotive class in Finland with 161 built. 100 locomotives were constructed between 1927 and 1930, with a further 61 ordered and constructed 1943–53. They were numbered 800–899, 1100–1118, and 1129–1170.

<span class="mw-page-title-main">VR Class Dm7</span> Diesel multiple unit locomotives

The Dm6 and Dm7 were diesel multiple units built by Valmet in the 1950s and 1960s for Valtionrautatiet. They are known by their nickname lättähattu.

<span class="mw-page-title-main">VR Class Pr1</span>

VR Class Pr1 was a tank steam locomotive for local passenger services of Finnish railways.

<span class="mw-page-title-main">Finnish Steam Locomotive Class B1</span>

The Finnish Steam Locomotive Class B1 is an 0-4-2ST built by Beyer, Peacock & Company, at its Gorton Foundry in Manchester, England. Nine were constructed between 1868 and 1890. They were designed for use as shunting locomotives.

<span class="mw-page-title-main">VR Class Hv1</span>

The Finnish VR Class Hv1 was a 4-6-0 express passenger train locomotive. 42 were built between 1915 and 1921. They were numbered 545–578 and 648–655.

<span class="mw-page-title-main">VR Class Vr1</span>

Before 1942, the VR Class Vr1 were originally classified as L1. The Vr1 was a powerful and effective locomotive. Part of them were built by Tampella and part by Hannoversche Maschinenbau AG of Germany. They were numbered 530–544, 656–670, 787–799 and were nicknamed “Kana” ("Hen"). They were operation from 1913-1974.

<span class="mw-page-title-main">VR Class Vr3</span>

The VR Class Vr3 was a class of steam locomotive built in Finland. Before 1942, the class was known as O1. They were nicknamed Kukko and they have the same frames and boiler as the Vr Class Pr1 (Paikku) locomotive. The first locomotive was ordered in 1924 from Hanomag of Germany, number 10 351 and it was numbered 752. The remaining 4 were produced by Tampella Oy in Tampere. They were numbered 752 to 756.

<span class="mw-page-title-main">VR Class Tr1</span> Finnish steam locomotive

The VR Class Tr1 is a class of heavy freight locomotive built in Finland and Germany. Before 1942 VR Class Tr1s originally had the class name R1. They were nicknamed “Risto”, after the Finnish President Risto Ryti. They were numbered 1030–1096.

<span class="mw-page-title-main">VR Class Pr2</span>

The Finnish VR Class Pr2, nicknamed "Henschel", was a passenger tank class ordered from the Henschel & Son locomotive workshops by the Estonia State Railways in the spring 1939 and completed in 1941. The outbreak of the Second World War prevented their delivery to Estonia, but at least a few of these engines did manage to operate in Latvia in 1942. These engines became superfluous, because the Germans were converting the Baltic tracks to standard gauge, and so Finland could purchase these four engines. They were classified Pr2 and numbered 1800–1803 after their arrival in December 1942.

<span class="mw-page-title-main">VR Class Tve2</span>

VR Class Tve2 was a VR Group diesel shunting locomotive. They were ordered from the Saalasti Oy engineering company and built between 1962 and 1964. Locomotives was sent to the Turenki sugar factory. A total of 8 units. The manufacturer's designation for the model was OTSO2 and OTSO2/VR.

<span class="mw-page-title-main">VR Class Dr12</span>

VR Class Dr12 was a heavy diesel-electric locomotive of Valtionrautatiet. The first 6 locomotives were ordered in 1956. They entered service between 1959 and 1963. The locomotives were built by 2 manufacturers, Valmet and Lokomo, both based in Tampere. All Hr12 class locomotives with even numbers were produced by Valmet, while all odd numbers were produced by Lokomo. The locomotives were withdrawn in the early 1990s.

<span class="mw-page-title-main">VR Class Ds1</span>

The VR Class Ds1 Also known as "Puumotti" was the first railbus of the Finnish State Railways. It was ordered in 1927. The Ds1 was built by the Pasila workshop, but the automotive parts including the engine were supplied by the Swedish company DEVA. Ds1 has a diesel engine and an electric drive, with a diesel generator providing power to the wheels. A cab is at either end of the vehicle, so that the vehicle did not have to be turned at terminal stations. The vehicle consisted of a motor room, a luggage compartment, and a 3rd class passenger compartment bare on a wooden bench seating.

<span class="mw-page-title-main">VR Class Vk3</span>

The VR Class Vk3 was originally called the Finnish Steam Locomotive Class I3. The Finnish State Railways ordered three similar classes of locomotives; The American-built Baldwin Class I1s, and the Class I2s and Class I3s, built at Tampella. All were tank locomotives, which did not have to be turned at terminal stations and could run in both directions at the same speed.

<span class="mw-page-title-main">VR Class Rro</span>

VR Class Rro was a locomotive of Finnish origin. The Rro portion of the name comes from a word RautatieRakennusOsasto which is the Railway Construction Department.

<span class="mw-page-title-main">Säyneinen</span> Former municipality in Kuopio Province, Finland

Säyneinen is a village and a former municipality of Finland at the time of its existence in the Kuopio Province, now in Northern Savonia. Together with Muuruvesi, it was consolidated with Juankoski in 1971, since 2017 part of Kuopio.

References

  1. 1 2 3 4 5 6 7 8 "Leena on pieni, hidas ja tehoton | Häme". yle.fi. Retrieved 2012-01-30.
  2. "Finnish Railway Museum - Welcome!". Rautatie.org. Archived from the original on 2013-05-16. Retrieved 2012-01-30.

See also