Walter Vega

Last updated
Vega
Walter Vega (1929) 1.jpg
Walter Vega, radial five-cylinder
Type Radial aircraft engine
National origin Czechoslovakia
Manufacturer Walter Aircraft Engines
DesignerFrantišek Adolf Barvitius
First run1929

The Walter Vega was a five-cylinder, air-cooled, radial engine for aircraft use, built in Czechoslovakia in the late 1920s.

Contents

Applications

Specifications

Data fromFlight. [1]

General characteristics

Components

Performance

See also

Related lists

Related Research Articles

<span class="mw-page-title-main">Armstrong Siddeley Leopard</span> 1920s British piston aircraft engine

The Armstrong Siddeley Leopard was a British 14-cylinder twin-row air-cooled radial aero engine developed in 1927 by Armstrong Siddeley. It was the most powerful radial engine in the world when introduced.

<span class="mw-page-title-main">Armstrong Siddeley Lynx</span> 1920s British piston aircraft engine

The Armstrong Siddeley Lynx is a British seven-cylinder aero engine developed by Armstrong Siddeley. Testing began in 1920 and 6,000 had been produced by 1939. In Italy Alfa Romeo built a 200 horsepower (150 kW) licensed version of this engine named the Alfa Romeo Lynx.

<span class="mw-page-title-main">Armstrong Siddeley Mongoose</span> 1920s British piston aircraft engine

The Armstrong Siddeley Mongoose is a British five-cylinder radial aero engine produced by Armstrong Siddeley. Developed in the mid-1920s it was used in the Hawker Tomtit trainer and Parnall Peto seaplane amongst others. With a displacement of 540 cubic inches (9 litres) the Mongoose had a maximum power output of 155 horsepower (115 kilowatts).

<span class="mw-page-title-main">Walter Venus</span> 1920s Czech piston aircraft engine

The Walter Venus was a seven-cylinder, air-cooled, radial engine for aircraft use, built in Czechoslovakia in the late 1920s.

<span class="mw-page-title-main">Gnome-Rhône 18L</span>

The Gnome et Rhône 18L was a French-designed twin-row 18-cylinder air-cooled radial engine. The 18L was a large step up in terms of displacement, power and number of cylinders. The majority of Gnome-Rhone engines were either 7, 9 or 14 cylinders. The engine proved not to be a success, and it was dropped in 1939 due to a poor power-to-weight ratio.

<span class="mw-page-title-main">Armstrong Siddeley Ounce</span> 1920s British piston aircraft engine

The Armstrong Siddeley Ounce was a small two-cylinder aero engine developed by Armstrong Siddeley in 1920. The engine was originally conceived as a test piece but ran very well and was put into production for early ultralight aircraft and use in target drones. The Ounce used two cylinders from the preceding Jaguar I radial engine.

<span class="mw-page-title-main">Jacobs R-915</span> Radial aircraft engine manufactured in the United States

The Jacobs R-915 or Jacobs L-6 is a seven-cylinder, air-cooled, radial engine for aircraft manufactured in the United States, production started in 1936.

The Jacobs R-830 or L-5 is a seven-cylinder, air-cooled, radial engine for aircraft manufactured in the United States, production started in 1935.

<span class="mw-page-title-main">Alvis Pelides</span> 1930s British piston aircraft engine

The Alvis Pelides was an unflown British air-cooled radial aero engine first developed in 1936. The Pelides Major was a projected but unbuilt development as were the Alcides, Alcides Major and the Maeonides Major, the Alvis aircraft engine range taking their names from Greek mythology.

The Blackburn Cirrus Midget was a British four-cylinder, inverted, inline air-cooled aero engine designed and built in 1937 by the Cirrus Engine Section of Blackburn Aircraft Limited. Little is known of its development and use, its sole aircraft application being reported as the Chilton D.W.1 although it is possible that this did not transpire.

<span class="mw-page-title-main">Wolseley Aquarius</span> 1930s British piston aircraft engine

The Wolseley Aquarius I or A.R.7 was a British seven-cylinder, air-cooled radial aero engine that first ran in 1933, it was designed and built by Wolseley Motors. Intended for the military trainer aircraft market few were produced, as Wolseley withdrew from the aero engine market in 1936.

<span class="mw-page-title-main">Salmson AD.3</span>

The Salmson AD.3 or Salmson 3 Ad was a French designed, three-cylinder, air-cooled radial aero engine. It was also produced by British Salmson in Great Britain during the 1920s.

<span class="mw-page-title-main">British Salmson AD.9</span>

British Salmson aero-engines refers to a series of small French designed, air-cooled radial aero engine that were produced by British Salmson Aero Engines Ltd, under license from Société des Moteurs Salmson, in Great Britain during the late 1920s and 1930s.

<span class="mw-page-title-main">Walter Scolar</span> 1930s Czech piston aircraft engine

The Walter Scolar was a Czechoslovakian nine-cylinder, air-cooled radial engine for powering light aircraft that first ran in 1936. With a displacement of 8 litres, it produced 132 kW at 2,500 rpm.

<span class="mw-page-title-main">Walter Pollux</span> 1930s Czech piston aircraft engine

The Walter Pollux is a Czechoslovakian nine-cylinder, air-cooled, radial engine, built by Walter Aircraft Engines for powering light aircraft and that first ran in 1936. The engine produces 240 kW (320 hp) at 1,800 rpm.

<span class="mw-page-title-main">Walter Regulus</span> 1930s Czech piston aircraft engine

The Walter Regulus was a Czechoslovakian five-cylinder, air-cooled radial engine for powering light aircraft that first ran in 1934. The engine produced 186 kW.

<span class="mw-page-title-main">Walter Bora</span> 1930s Czech piston aircraft engine

The Walter Bora was a Czechoslovakian nine-cylinder, air-cooled radial engine for powering light aircraft that was developed in the 1930s by Walter Aircraft Engines.

<span class="mw-page-title-main">Walter Mars</span> 1930s Czech piston aircraft engine

The Walter Mars was a Czechoslovakian 14-cylinder, air-cooled radial engine for powering aircraft, a licensed built Gnome-Rhône 14M.

<span class="mw-page-title-main">Walter Castor</span> 1920s Czech piston aircraft engine

The Walter Castor was a Czechoslovakian seven-cylinder, air-cooled radial engine for powering aircraft that was developed in the late 1920s. The Super Castor was a nine-cylinder development. Castor I production began in 1928, Castor II in 1932 and the Castor III in 1934.

<span class="mw-page-title-main">Walter Mars I</span> 1920s Czech piston aircraft engine

The Walter Mars I was a nine-cylinder, air-cooled, radial engine for aircraft use built in Czechoslovakia in the late 1920s.

References

  1. Flight - 25 July 1929, p. 762. Retrieved: 29 May 2012