The Western Digital Raptor (often marketed as WD Raptor, 2.5" models known as VelociRaptor) is a discontinued series of high performance hard disk drives produced by Western Digital first marketed in 2003. The drive occupied a niche in the enthusiast, workstation and small-server market. Traditionally, the majority of servers used hard drives featuring a SCSI interface because of their advantages in both performance and reliability over consumer-level ATA drives.
Although pitched as an “enterprise-class drive”, it won favor with the PC gaming and enthusiast community because the drive was capable of speeds usually found only on more expensive SCSI drives. Adopting the SATA interface meant that it could be used easily on all modern motherboards with no separate host adapter card. Also, integration was made easier still by the inclusion of a standard 4-pin Molex power connector in addition to the standard SATA power port. This, however, was available only in 3.5" models.
Despite having been in production since early 2003, there was no direct competition in the same market for many years.
In 2006, Western Digital acknowledged the primary consumer of its Raptor brand drives by releasing a revision of its 150 GB drive. In keeping with the PC case modding trend of stylizing, the drive was given a Perspex window to match the internals of computer cases. This allows the user to see the drive's inner workings while it is in operation.
On February 10, 2003, Western Digital announced the first consumer 10,000 RPM hard drive, sold in 36 GB and 74 GB versions. [1]
On April 21, 2008, Western Digital announced the next generation of its 10,000 RPM SATA Raptor hard drive series. The new drives, called WD VelociRaptor, feature 300 GB capacity and 2.5-inch platters enclosed in the IcePack, a 3.5-inch mounting frame with a built-in heat sink. Western Digital claimed that the new drives were 35 percent faster than the previous generation Raptors. [2]
On April 6, 2010, Western Digital updated the VelociRaptor series. The drives contain up to three platters and a 600 GB total capacity, upgraded from the dual-platter 300 GB design of the prior flagship model. Western Digital claims the new models are 15 percent faster than the previous generation of VelociRaptors. [3]
On April 16, 2012, Western Digital updated the VelociRaptor series for the second time. The new drives contain up to three platters and a 1000 GB total capacity, upgraded from the triple-platter 600 GB design of the prior flagship model. It was the last generation of Raptor hard drives to be manufactured; Western Digital removed it from its product catalog in mid-2016, without any direct successor.
Alongside VelociRaptor, Western Digital also produced S25, rebranded XE in May 2012, an SAS version of VelociRaptor. It was first launched on November 3, 2009 [4] with capacities of 147 and 300 GB, which are similar to competing drives from other manufacturers. They were later expanded to 450 and 600 GB in January 2011, [5] and to 900 GB in March 2012. [6] XE was removed from Western Digital's product catalog before VelociRaptor, in March 2015.
In 2003, Western Digital released the first incarnation of the Raptor series: the WD360GD. [7] It featured a capacity of 37 GB on a single platter, a Serial ATA interface, and was the first ATA drive to operate at a spindle speed of 10,000 rpm. Like many early SATA drives, the Raptor was not a "real" SATA drive because it was really a PATA drive that used an 88i8030C interface bridge chip from Marvell. However, this fact did not significantly hamper the Raptor's performance. WD360GD Raptors do not use the 3.3 V Serial ATA power line. There is no need to use a SATA power connector as it will not be fully utilized. [8]
As is usually the case for hard drives featuring a faster spindle speed, the Raptor outperformed other ATA drives and in some situations was even able to reach the performance of contemporary 10,000 rpm SCSI drives. SCSI drives still outperformed the Raptor in multi-user scenarios, but for high-end home computers it fared very well. For enthusiasts' systems, the Raptor also had the key advantages of low noise and temperature levels compared to similarly performing drives.
All WD360GD drives with Part Number WD360GD-00FNA0 (December 2003) and earlier cannot accept SATA latch cables, as the SATA data connector does not have the required rails. Therefore, only normal cables can be plugged into these connectors.
WD360GD Raptors with the Marvell 88i8030-TBC PATA to SATA bridge chip, such as WD360GD-00FNA0 (December 2003) and earlier, are limited to UDMA 5 transfers. In Linux, "applying bridge limits" is displayed and then it allows transfers up to UDMA/100. In Microsoft Windows, they are reported as UDMA 6, but give a burst rate of 104 MB/s, while WD360GD with the 88i8030-TBC1 chip are reported as UDMA 6 and give a burst rate of 122 MB/s, close their theoretical limit of UDMA 6. Those Raptors limited at UDMA 5 were bought for SATA I 150 MB/s support, but they only support the legacy PATA UDMA 5 at 100 MB/s.
Like its larger brother the WD740GD, the WD360GD was revised in 2006 and released with the designation WD360ADFD - incorporating twice as much on-board cache (16 MB vs 8 MB), at least one side of a single platter that offers twice the areal density, and enabling NCQ.
The second generation Raptor was introduced in early 2004, featuring two platters for 74 GB of storage space. Unlike its predecessor, the WD740GD didn't use ball bearings to support the spinning disks, but rather used fluid dynamic bearings. These allowed the new Raptor to operate at a noise level comparable to the quieter 7,200 rpm drives.
Another advantage the WD740GD had over its predecessor was Tagged Command Queuing, a feature that had previously been available only in SCSI drives. Command queuing resulted in a notable increase in the WD740GD's multi-user performance—a key discipline where its predecessor failed compared to SCSI drives. However, enabling command queuing on the WD740GD resulted in a performance decrease in single-user scenarios. It is worth noting that as of 2005 [update] , only a few SATA controllers could fully support command queuing. This drive became immensely popular in high-end gaming systems because of these features.
In 2006 Western Digital revised the WD740GD specification and released the WD740ADFD, ostensibly the same drive but with 16 MB of on-board cache, and a larger single platter (one 75 GB platter vs two 37 GB platters). Support for TCQ (rarely supported on SATA RAID controllers) was dropped in favor of NCQ, and at the same time replacing the SATA-to-PATA bridge controller chip with a native SATA controller. Unfortunately one of the major enhancements of WD740ADFD, the NCQ, is implemented so badly in the WD740ADFD-00NLR1 that it has been added to the Linux libata drive blacklist. The WD740GD did not apply because it uses TCQ and not NCQ. In order to deal with it, NCQ is disabled Link to the NCQ-Bug in the Kernel Bug Tracker. In TCQ capable controllers, the WD740GD is possibly faster than its successor as some of the WD740ADFDs' gains are lost. The WD740ADFD has also caused problems in some motherboards and their manufacturers had to release BIOS updates.
The third generation Raptor was released by Western Digital in January 2006. It features two 75 GB platters (for a total of 150 GB) and a more advanced system of Native Command Queuing. At the same time, the Raptor X was released. It has identical specifications to the standard Raptor, [9] but it has the addition of a clear polycarbonate window in the drive cover, making the movements of the disks and magnetic heads visible. This unique feature is likely to be popular with case modders. Like the regular Raptor, the Raptor X has a MTBF rating of 1.2 million hours, or 137 years. Both drives are covered by a five-year warranty. While this drive uses the NCQ feature of SATA 2, it lacks support for the increased bandwidth of SATA 2. [10]
The fourth-generation Raptor was announced by Western Digital in April 2008. The new drive is being sold under the VelociRaptor name. [11] As well as increasing the capacity to 300 GB (split over two 150 GB platters), the form factor is as follows:
Earlier GLFS models have been criticised for being incompatible with 3.5-inch SATA hot swap bays due to the position of the connectors; however, a new revision (HLFS models) has been released which remedies this problem. [12] Furthermore, TLER has been enabled by default on HLFS models.
Western Digital later released a 2.5-inch Velociraptor (BLFS models) which is nearly identical to the 3.5-inch version, but without the IcePack heat sink. These drives are designed for use in servers and are unsuitable for laptops because of their power requirements and 15 mm thickness. TLER is also enabled by default on BLFS models.
A severe issue with the fourth generation of raptor drives was faulty firmware, which caused the drive to report TLER timeouts after roughly 50 days of continuous operation (precisely 49.71 days counted in milliseconds, which corresponds to the overflow of a 32-bit number). [13] [14] [15] The bug has been present in all models of drives shipped, from their introduction up to late 2009. WDC never admitted the existence of this bug, or officially released a firmware update; however, an update was leaked by a WDC technician and is still readily available through various download sites. [16] The bug was of minor significance for desktop users, but prolonged drive operation in RAID setups could result in mass drive dropouts after 49.71 days, causing maintenance problems and potentially data loss.
The fifth-generation Raptor (or second-generation VelociRaptor) drive was announced in April 2010. Besides increasing the total capacity to 600 GB, the SATA interface speed had been increased to 6 Gbit/s. The drives are sold either in the same IcePack mounting frame as the previous generation, or as bare drives (intended for rackmount servers). While the drive width of 2.5 inches may entice users to try to install a VelociRaptor drive in a laptop, this is not possible. Not only are the drives a thicker-than-usual 15 mm high, but they require both +12 V and +5 V power that most laptops cannot provide. Standard laptop hard drives typically only require +5 V.
The sixth-generation Raptor (or third-generation VelociRaptor) was announced by Western Digital in April 2012. The drives are 2.5-inch devices with 15 mm in height, sold either as bare drives (CHTZ and BHTZ models) or mounted in the IcePack 3.5-inch mounting frame (DHTZ and HHTZ models), which continues the variants available in the previous generation. Beside increasing the capacity to 1000 GB, the buffer size has been doubled to 64 MB. They are also the first Raptor models employing the Advanced Format (AF) 512e internal layout. [17] [18]
Model no. | Gen. | Released | Capacity | Cache | Interface | Feature set | Sector Size | Notes | Product Page |
---|---|---|---|---|---|---|---|---|---|
WD360GD | 1 | 2003 | 36 GB | 8 MB | Parallel ATA to Serial ATA bridge | – | 512 bytes | – | Specifications |
WD740GD | 2 | 2004 | 74 GB | 8 MB | Parallel ATA to Serial ATA bridge | TCQ | 512 bytes | – | Specifications |
WD360ADFD | 3 | 2006 | 36 GB | 16 MB | Native SATA | NCQ | 512 bytes | – | Specifications |
WD740ADFD | 3 | 2006 | 74 GB | 16 MB | Native SATA | NCQ | 512 bytes | – | Specifications |
WD1500ADFD | 3 | 2006 | 150 GB | 16 MB | Native SATA | NCQ | 512 bytes | – | Specifications |
WD1500AHFD | 3 | 2006 | 150 GB | 16 MB | Native SATA | NCQ | 512 bytes | Raptor X variant | Specifications |
WD740HLFS | 4 | 2008 | 74 GB | 16 MB | Native SATA 3 Gbit/s | NCQ | 512 bytes | VelociRaptor | TBA |
WD800HLFS | 4 | 2008 | 80 GB | 16 MB | Native SATA 3 Gbit/s | NCQ | 512 bytes | VelociRaptor | TBA |
WD1500BLFS | 4 | 2008 | 150 GB | 16 MB | Native SATA 3 Gbit/s | NCQ | 512 bytes | VelociRaptor | Specifications |
WD1500HLFS | 4 | 2008 | 150 GB | 16 MB | Native SATA 3 Gbit/s | NCQ | 512 bytes | VelociRaptor | Specifications |
WD3000BLFS | 4 | 2008 | 300 GB | 16 MB | Native SATA 3 Gbit/s | NCQ | 512 bytes | VelociRaptor | Specifications |
WD3000GLFS | 4 | 2008 | 300 GB | 16 MB | Native SATA 3 Gbit/s | NCQ | 512 bytes | VelociRaptor | Specifications |
WD3000HLFS | 4 | 2008 | 300 GB | 16 MB | Native SATA 3 Gbit/s | NCQ | 512 bytes | VelociRaptor | Specifications |
WD3000HLHX | 5 | 2010 | 300 GB | 32 MB | Native SATA 6 Gbit/s | NCQ | 512 bytes | VelociRaptor | Specifications |
WD4500BLHX | 5 | 2010 | 450 GB | 32 MB | Native SATA 6 Gbit/s | NCQ | 512 bytes | VelociRaptor | Specifications |
WD4500HLHX | 5 | 2010 | 450 GB | 32 MB | Native SATA 6 Gbit/s | NCQ | 512 bytes | VelociRaptor | Specifications |
WD6000BLHX | 5 | 2010 | 600 GB | 32 MB | Native SATA 6 Gbit/s | NCQ | 512 bytes | VelociRaptor | Specifications |
WD6000HLHX | 5 | 2010 | 600 GB | 32 MB | Native SATA 6 Gbit/s | NCQ | 512 bytes | VelociRaptor | Specifications |
WD1500HLHX | 5 | 2011 | 150 GB | 32 MB | Native SATA 6 Gbit/s | NCQ | 512 bytes | VelociRaptor | Specifications |
WD1600HLHX | 5 | 2011 | 160 GB | 32 MB | Native SATA 6 Gbit/s | NCQ | 512 bytes | VelociRaptor | Specifications |
WD3000HLHX | 5 | 2011 | 300 GB | 32 MB | Native SATA 6 Gbit/s | NCQ | 512 bytes | VelociRaptor | Specifications |
WD6000HLHX | 5 | 2011 | 600 GB | 32 MB | Native SATA 6 Gbit/s | NCQ | 512 bytes | VelociRaptor | Specifications |
WD2500HHTZ | 6 | 2012 | 250 GB | 64 MB | Native SATA 6 Gbit/s | NCQ | 4096 bytes | VelociRaptor | Specifications |
WD5000HHTZ | 6 | 2012 | 500 GB | 64 MB | Native SATA 6 Gbit/s | NCQ | 4096 bytes | VelociRaptor | Specifications |
WD1000DHTZ | 6 | 2012 | 1000 GB | 64 MB | Native SATA 6 Gbit/s | NCQ | 4096 bytes | VelociRaptor | Specifications |
Special models | |||||||||
WD800GD | 2 | 2004 | 80 GB | 8 MB | Parallel ATA to Serial ATA bridge | TCQ | 512 bytes | – | [Original link no longer available] |
WD800ADFD | 3 | 2006 | 80 GB | 16 MB | Native SATA | NCQ | 512 bytes | Initially HP/Dell-exclusive; now retailed | Specifications |
WD800ADFS | 3 | 2006 | 80 GB | 16 MB | Native SATA 3 Gbit/s | NCQ | 512 bytes | Initially HP/Dell-exclusive; now retailed | Official site |
WD1600ADFS | 3 | 2006 | 160 GB | 16 MB | Native SATA 3 Gbit/s | NCQ | 512 bytes | Initially HP/Dell-exclusive; now retailed | Specifications |
WD800HLFS | 4 | 2008 | 80 GB | 16 MB | Native SATA 3 Gbit/s | NCQ | 512 bytes | Initially HP/Dell-exclusive; now retailed | Specifications |
WD1600HLFS | 4 | 2008 | 160 GB | 16 MB | Native SATA 3 Gbit/s | NCQ | 512 bytes | HP/Dell-exclusive | Specifications |
Parallel ATA (PATA), originally AT Attachment, also known as Integrated Drive Electronics (IDE), is a standard interface designed for IBM PC-compatible computers. It was first developed by Western Digital and Compaq in 1986 for compatible hard drives and CD or DVD drives. The connection is used for storage devices such as hard disk drives, floppy disk drives, optical disc drives, and tape drives in computers.
A hard disk drive (HDD), hard disk, hard drive, or fixed disk is an electro-mechanical data storage device that stores and retrieves digital data using magnetic storage with one or more rigid rapidly rotating platters coated with magnetic material. The platters are paired with magnetic heads, usually arranged on a moving actuator arm, which read and write data to the platter surfaces. Data is accessed in a random-access manner, meaning that individual blocks of data can be stored and retrieved in any order. HDDs are a type of non-volatile storage, retaining stored data when powered off. Modern HDDs are typically in the form of a small rectangular box.
SATA is a computer bus interface that connects host bus adapters to mass storage devices such as hard disk drives, optical drives, and solid-state drives. Serial ATA succeeded the earlier Parallel ATA (PATA) standard to become the predominant interface for storage devices.
Western Digital Corporation is an American data storage company headquartered in San Jose, California. It has a decades-long history in the electronics industry as an integrated circuit and data memory technology developer. It is one of the world's largest computer hard disk drive (HDD) manufacturers, along with producing solid-state drives (SSDs) and flash memory devices.
The Power Macintosh G3 is a series of personal computers designed, manufactured, and sold by Apple Computer from November 1997 to August 1999. It represented Apple's first step towards eliminating redundancy and complexity in the product line by replacing eight Power Macintosh models with three: Desktop and Mini Tower models for professional and home use, and an all-in-one model for education. The introduction of the Desktop and Mini Tower models coincided with Apple starting to sell build-to-order Macs directly from its web site in an online store, which was unusual for the time as Dell was the only major computer manufacturer doing this. Apple's move to build-to-order sales of the Power Macintosh G3 also coincided with the acquisition of Power Computing Corporation, which had been providing telephone sales of Macintosh clones for more than two years.
CompactFlash (CF) is a flash memory mass storage device used mainly in portable electronic devices. The format was specified and the devices were first manufactured by SanDisk in 1994.
In computing, Native Command Queuing (NCQ) is an extension of the Serial ATA protocol allowing hard disk drives to internally optimize the order in which received read and write commands are executed. This can reduce the amount of unnecessary drive head movement, resulting in increased performance for workloads where multiple simultaneous read/write requests are outstanding, most often occurring in server-type applications.
In computing, Serial Attached SCSI (SAS) is a point-to-point serial protocol that moves data to and from computer-storage devices such as hard disk drives, solid-state drives and tape drives. SAS replaces the older Parallel SCSI bus technology that first appeared in the mid-1980s. SAS, like its predecessor, uses the standard SCSI command set. SAS offers optional compatibility with Serial ATA (SATA), versions 2 and later. This allows the connection of SATA drives to most SAS backplanes or controllers. The reverse, connecting SAS drives to SATA backplanes, is not possible.
Perpendicular recording, also known as conventional magnetic recording (CMR), is a technology for data recording on magnetic media, particularly hard disks. It was first proven advantageous in 1976 by Shun-ichi Iwasaki, then professor of the Tohoku University in Japan, and first commercially implemented in 2005. The first industry-standard demonstration showing unprecedented advantage of PMR over longitudinal magnetic recording (LMR) at nanoscale dimensions was made in 1998 at IBM Almaden Research Center in collaboration with researchers of Data Storage Systems Center (DSSC) – a National Science Foundation (NSF) Engineering Research Center (ERCs) at Carnegie Mellon University (CMU).
A hybrid drive is a logical or physical computer storage device that combines a faster storage medium such as solid-state drive (SSD) with a higher-capacity hard disk drive (HDD). The intent is adding some of the speed of SSDs to the cost-effective storage capacity of traditional HDDs. The purpose of the SSD in a hybrid drive is to act as a cache for the data stored on the HDD, improving the overall performance by keeping copies of the most frequently used data on the faster SSD drive.
The Quantum Bigfoot series was a type of hard disk drives produced by Quantum Corp. from 1996 through the late 1990s. The Bigfoot series was notable for deviating from the standard form factor for hard drives. While most desktop hard drives at that time used a 3.5-inch physical format, Quantum Bigfoot drives used a larger 5.25-inch form factor more commonly seen in older hard drives, CD-ROM and other optical disc drives. This form factor allowed Quantum to increase the capacity of their hard drives without an increase in data density, thus lowering costs compared to a 3.5-inch drive with the same capacity. It also allowed manufacturers and owners to install the hard drive above or below the optical drive in the computer, as the typical computer had multiple 5.25-inch bays.
Deskstar was the name of a product line of computer hard disk drives. It was originally announced by IBM in October 1994. The line was continued by Hitachi, when in 2003 it bought IBM's hard disk drive division and renamed it Hitachi Global Storage Technologies. In 2012, Hitachi sold the division to Western Digital, who continued the drive product line brand as HGST Deskstar. In 2018, Western Digital began winding down the HGST brand, and as of 2020 it is defunct.
In computer science, a command queue is a queue that determines when a command is executed, usually by order of priority or on a first-in first-out basis. Instead of waiting for each command to be executed before sending the next one, a program will put all its commands in the command queue, freeing it to perform other functions while the queue is processed by the operating system.
Travelstar was a brand of 2.5-inch hard disk drive (HDD) that was introduced by IBM in 1994 with the announcement of the Travelstar LP. At 12.5 mm high with two platters, they were available in 360, 540 and 720 MB capacities. Initial models were industry-leading for small form factor HDDs in terms of areal density, data transfer rates and shock tolerance (500g).
sync is a standard system call in the Unix operating system, which commits all data from the kernel filesystem buffers to non-volatile storage, i.e., data which has been scheduled for writing via low-level I/O system calls. Higher-level I/O layers such as stdio may maintain separate buffers of their own.
In 1953, IBM recognized the immediate application for what it termed a "Random Access File" having high capacity and rapid random access at a relatively low cost. After considering technologies such as wire matrices, rod arrays, drums, drum arrays, etc., the engineers at IBM's San Jose California laboratory invented the hard disk drive. The disk drive created a new level in the computer data hierarchy, then termed Random Access Storage but today known as secondary storage, less expensive and slower than main memory but faster and more expensive than tape drives.
In computer storage, a disk buffer is the embedded memory in a hard disk drive (HDD) or solid-state drive (SSD) acting as a buffer between the rest of the computer and the physical hard disk platter or flash memory that is used for storage. Modern hard disk drives come with 8 to 256 MiB of such memory, and solid-state drives come with up to 4 GB of cache memory.
The Seagate Barracuda is a series of hard disk drives and later solid state drives produced by Seagate Technology that was first introduced in 1993.
The Quantum Fireball was a brand of 3.5-inch hard disk drives made by Quantum Corporation from 1995 to 2001. The first models in the series were 5400 RPM and came in 0.54 and 1.08 GB capacities, while the Quantum Fireball Plus was known for being Quantum's first 7200 RPM Integrated Drive Electronics (IDE) hard drive. There were sixteen different models of the Quantum Fireball, with the last being the LCT 20.
Official
Reviews