| White Pass and Yukon Route Class DL-535E MLW-Worthington Model Series C-14 | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | |||||||||||||||||||||||||
| |||||||||||||||||||||||||
| |||||||||||||||||||||||||
| |||||||||||||||||||||||||
| |||||||||||||||||||||||||
The White Pass and Yukon Route Class DL-535E (sometimes known as the MLW-Worthington Model Series C-14) is a series of narrow-gauge diesel locomotives that were custom-built by the Montreal Locomotive Works of Montreal, Quebec in Canada between 1969 and 1971 for the White Pass and Yukon Route (WP&Y) in Skagway, Alaska. [2] [3]
Units 101-107 were built in May 1969 while units 108-110 were built in December 1971. [4] [5] [6] They are powered by an American Locomotive Company (ALCO) model 6-251D prime mover. [3] In July 1982, the White Pass and Yukon Route (WP&Y) ordered an additional four units, those being units 111-114, built by the Bombardier Transportation, complete with a wide cab instead of the traditional standard cab at the time, but these units were ultimately never delivered to them and eventually placed in storage. [7]
In 1992, Units #102 and #105 were both severely damaged and burned beyond repair in a roundhouse fire in Skagway, Alaska and later scrapped as a result. [3] Later that year, Nos. 101, 103, 104, 106, and 107 were sold to Sociedad Colombiana de Transport Ferroviaro in South America until later being sold back to the White Pass and Yukon Route in 1999 for tourist excursion service. [3]
In April 2020, Nos. 101, 103, 106, and 107 were sold again to the Durango and Silverton Narrow Gauge Railroad (D&SNG) in Durango, Colorado, with Nos. 101 and 107 both arriving at the D&SNG in August and September of that year respectively and Nos. 103 and 106 both arriving at the D&SNG in September 2021. This was due to the late delivery of D&SNG MP2000NG type diesels Nos. 1201 and 1202, which were both custom-built by the now-defunct Motive Power and Equipment Solutions, Inc. (MP&ES) of Greenville, South Carolina sometime between 2018 and 2020, having both been rebuilt from two former Tri-Rail EMD F40PHL-2 type diesels. [8] [9]
From 1982 to 1991, Nos. 111, 112, 113, and 114 were stored at Soulanges Industries, Les Cèdres, Quebec. Nos. 111, 112, and 113 were eventually sold in 1991 to the United States Gypsum Corporation in Plaster City, California while No. 114 was eventually sold to the WP&Y in 1995 for tourist excursion service. [10]
Unfortunately, in 1992, No. 113 was destroyed in an accident and later scrapped as a result. As of 2020, No. 114 remains at the WP&Y where it is currently stored out of service, having last operated sometime in the late 2010s. On November 11, 2023, the Cumbres and Toltec Scenic Railroad (C&TS) announced in a commission meeting that they would acquire No. 114 for $120,000. [10] [11]
The Denver and Rio Grande Western Railroad, often shortened to Rio Grande, D&RG or D&RGW, formerly the Denver & Rio Grande Railroad, was an American Class I railroad company. The railroad started as a 3 ft narrow-gauge line running south from Denver, Colorado, in 1870. It served mainly as a transcontinental bridge line between Denver and Salt Lake City, Utah. The Rio Grande was also a major origin of coal and mineral traffic.
The White Pass and Yukon Route is a Canadian and U.S. Class III 3 ft narrow-gauge railroad linking the port of Skagway, Alaska, with Whitehorse, the capital of Yukon. An isolated system, it has no direct connection to any other railroad. Equipment, freight and passengers are ferried by ship through the Port of Skagway, and via road through a few of the stops along its route.
The ALCO Century 415 is a diesel-electric locomotive of B-B wheel arrangement produced by the American Locomotive Company (ALCO) as part of their Century Series of locomotives.
The ALCO S-1 and S-3 were 660 horsepower (490 kW) diesel-electric switcher locomotives produced by ALCO and their Canadian subsidiary Montreal Locomotive Works (MLW). The two locomotives differed only in trucks, with the S-1 using ALCO's own Blunt trucks, and the S-3 using AAR type A switcher trucks. The S-1 was built between April 1940 and June 1950, with a total of 543 completed, while the S-3 was constructed between February 1950 and November 1953 with total sales of 300. A modified version, the S-10, was built by MLW only; 13 were built between January and June 1958.
The Cumbres and Toltec Scenic Railroad, often abbreviated as the C&TSRR, is a 3 ft narrow-gauge heritage railroad that operates on 64 miles (103 km) of track between Antonito, Colorado, and Chama, New Mexico, in the United States. The railroad is named for two geographical features along the route: the 10,015-foot (3,053 m)-high Cumbres Pass and the Toltec Gorge. Originally part of the Denver and Rio Grande Western Railroad's narrow-gauge network, the line has been jointly owned by the states of Colorado and New Mexico since 1970. Today, the C&TSRR is one of only two remaining parts of the former D&RGW narrow-gauge network, the other being the Durango and Silverton Narrow Gauge Railroad (D&SNG), which runs between the communities of Durango and Silverton, Colorado. The railroad has a total of ten narrow-gauge steam locomotives and two narrow-gauge diesel locomotives on its current roster. The railroad also operates two smaller former D&RGW steam locomotives, Nos. 315 and 168, for special events and excursions.
The Durango and Silverton Narrow Gauge Railroad, often abbreviated as the D&SNG, is a 3 ft (914 mm) narrow-gauge heritage railroad that operates on 45.2 mi (72.7 km) of track between Durango and Silverton, in the U.S. state of Colorado. The railway is a federally-designated National Historic Landmark and was also designated by the American Society of Civil Engineers as a National Historic Civil Engineering Landmark in 1968.
The ALCO RSD-12 was a C-C diesel-electric locomotive rated at 1,800 horsepower (1.34 MW). 171 locomotives were produced —Used in much the same manner as its four-axle counterpart, the ALCO RS-11, though the six-motor design allowed better tractive effort at lower speeds.
The ALCO RS-2 is a 1,500–1,600 horsepower (1,100–1,200 kW) B-B diesel-electric locomotive built by the American Locomotive Company (ALCO) from 1946 to 1950. ALCO introduced the model after World War II as an improvement on the ALCO RS-1. Between 1946 and 1950, 377 examples of the RS-2 were built, primarily for American and Canadian customers.
The ALCO DL-109 was one of six models of A1A-A1A diesel locomotives built to haul passenger trains by the American Locomotive Company (ALCO) between December, 1939 and April, 1945. They were of a cab unit design, and both cab-equipped lead A units DL-103b, DL-105, DL-107, DL-109 and cabless booster B units DL-108, DL-110 models were built. The units were styled by noted industrial designer Otto Kuhler, who incorporated into his characteristic cab the trademark three-piece windshield design. A total of 74 cab units and four cabless booster units were built.
The ALCO FA was a family of B-B diesel locomotives designed to haul freight trains. The locomotives were built by a partnership of ALCO and General Electric in Schenectady, New York, between January 1946 and May 1959. Designed by General Electric's Ray Patten, they were of a cab unit design; both cab-equipped lead FA and cabless booster FB models were built. A dual passenger-freight version, the FPA/FPB, was also offered. It was equipped with a steam generator for heating passenger cars.
The Denver and Rio Grande Western K-36 is a class of ten 3 ft narrow gauge 2-8-2 "Mikado" type steam locomotives built for the Denver and Rio Grande Western Railroad (D&RGW) by Baldwin Locomotive Works. They were shipped to the Rio Grande in 1925 and were first used along the Monarch Branch and Marshall Pass, but were later sent to the Third Division out of Alamosa. Of the original ten, four are owned by the Durango and Silverton Narrow Gauge Railroad (D&SNG) and five by the Cumbres and Toltec Scenic Railroad (C&TSRR). Number 485 fell into the turntable pit at Salida and was scrapped in Pueblo in 1955, with many parts being saved.
The ALCO 300 was an early diesel-electric switcher locomotive built by the American Locomotive Company (ALCO) of Schenectady, New York between 1931 and 1938.
The Denver and Rio Grande Western K-37 is a class of 2-8-2 "Mikado" type narrow-gauge steam locomotives built for the Denver and Rio Grande Western Railroad. They were new steam locomotives built in the D&RGW Burnham Shops as a near copy of the Rio Grande class K-36. In-house production was chosen to preemptively address material shortages and personnel issues. Burnham Shops was assisted in the construction of the class by the Stearn-Rogers Manufacturing Company. The class recycled components from Baldwin Locomotive Works-built Class 19 2-8-0 locomotives used on the Rio Grande's standard gauge; re-using the boiler, tender and other components salvaged from the C-41's. The engine components were constructed new for the locomotive class.
The Denver and Rio Grande Western K-28 is a class of ten 3 ft gauge narrow gauge 2-8-2 "Mikado" type steam locomotives built in 1923 by the Schenectady Locomotive Works of the American Locomotive Company (ALCO) for the Denver & Rio Grande Railroad. They were the first new narrow gauge locomotives ordered by the railroad since 1903. They initially comprised class E-4-148-S, but were reclassified K-28 in 1924 when the railroad reorganized into the Denver & Rio Grande Western Railroad.
The ALCO 251 is a 4-stroke diesel engine that was developed by the American Locomotive Company to replace its 244 and 539 engines. The 251 was developed to be used in diesel locomotives, as a marine power plant in ships, and as a stationary power generator.
The MLW RS-18 was an 1,800 hp (1,340 kW) diesel-electric locomotive built by Montreal Locomotive Works between December 1956 and August 1968. It replaced the RS-10 in MLW's catalogue, and production totalled 351 locomotives, to eight customers.
Denver and Rio Grande Western No. 315 is a class "C-18" 2-8-0 "Consolidation" type narrow-gauge steam locomotive that was originally built for the Florence and Cripple Creek Railroad by the Baldwin Locomotive Works in 1895. It was purchased by the Denver and Rio Grande Railroad (D&RG) in 1917 and later became known as No. 315. It was retired in 1949 and had been on display at City of Durango parks until the Durango Railroad Historical Society restored the locomotive from 2001 to August 2007. It was operational from then until September 2021. On March 8, 2023, it has returned to service, following its FRA federally mandated 1,472-day boiler inspection and overhaul. Most "sister" locomotives to No. 315 were scrapped, but two others survive today: D&RGW No. 318, on display at the Colorado Railroad Museum; and F&CC No. 10, currently in storage at the Nevada Southern Railroad Museum.
The San Juan Express was a narrow gauge train that ran on the 3 feet (0.91 m) Denver & Rio Grande Western Railroad (D&RGW) route from Durango, Colorado via Chama, New Mexico; Cumbres Pass; and Antonito, Colorado to Alamosa, Colorado. The train ran from February 11, 1937 until January 31, 1951 as train numbers 115 and 116, though towards the end of the passenger service it took on the number 215 and 216.
