Yeo (locomotive)

Last updated

Lynton & Barnstaple Railway Yeo
L&bwebimage2.jpg
Yeo and train approaching Woody Bay in Southern livery
Type and origin
Power typeSteam
Builder Manning Wardle, Leeds [1]
Serial number1361
Build date1898 [1]
Specifications
Configuration:
   Whyte 2-6-2 T [1]
Gauge 1 ft 11+12 in (597 mm) [1]
Leading dia. 2 ft 0 in (0.610 m) [1]
Driver dia.2 ft 9 in (0.838 m) [1]
Trailing dia. 2 ft 0 in (0.610 m) [1]
Wheelbase Coupled: 6 ft 6 in (1.981 m)
Total: 17 ft 9 in (5.410 m) [1]
Length22 ft 4 in (6.81 m) over buffer beams [1]
Width6 ft 7 in (2.01 m) [1]
Height8 ft 11 in (2.72 m) [1]
Loco weight22.05 long tons (22.40  t; 24.70 short tons) [1]
Fuel type Coal [1]
Firebox:
  Grate area8.85 sq ft (0.822 m2) [1]
Heating surface383 sq ft (35.6 m2) [1]
Cylinders Two, outside [2] outside
Cylinder size 10.5 in × 16 in (267 mm × 406 mm) [1]
Valve gear Joy [1]
Career
Operators
NumbersL&B: Yeo,
SR: E759 [2]
Locale Devon, South West England
Last run29 September 1935 [3]
ScrappedDecember 1935

Yeo was one of three narrow gauge 2-6-2 T steam locomotives built by Manning Wardle in 1898 for the Lynton and Barnstaple Railway. The other two locomotives were named Exe and Taw. Yeo, like all the locomotives on the L&B, was named after a local river with a three-letter name, in this case the River Yeo. [3]

This naming tradition has been continued in the 21st Century, with Lyd (a replica of Lew, the fourth locomotive built to this basic design) operational on the Ffestiniog Railway and the Welsh Highland Railway. It had been intended that Lyd would receive Yeo's original chimney (which survived on a steamroller for 62 years) but it was found to be too corroded for further use. [4]

The naming tradition has also been applied to a Kerr Stuart Joffre class locomotive currently running on the revived L&B, which has been named Axe, [5] and a Maffei locomotive named Sid. [6]

Following the railway's closure in 1935 Yeo was scrapped along with all of the other L&B locomotives except Lew which was exported to South America. [3]

A set of frames for a new Yeo were built by Winson Engineering in 2000 and are currently stored waiting for construction to continue when funds are available. [7]

A 12+14 in (311 mm) gauge model was built by David Curwen in 1978 for the Réseau Guerlédan Chemin de Fer Touristique in Brittany, France. When the line closed, it transferred to the Fairbourne Railway in North Wales. [8]

A 7+14 in (184 mm) gauge model was built by Milner Engineering in 1979 and worked in Buckfastleigh before moving to the Gorse Blossom Railway in 1984. [9]

Notes

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 "Design, Configuration and Statistics". 762 Club. Retrieved 5 February 2017.
  2. 1 2 "Lynton and Barnstaple Locomotives". Southern Email Group's Internet Site. Retrieved 14 March 2024.
  3. 1 2 3 "History". The 762 Club. Retrieved 5 February 2017.
  4. "Lyd". Festipedia. Retrieved 5 February 2017.
  5. "Axe". Lynton and Barnstaple Railway. Retrieved 5 February 2017.
  6. "Locomotives". Lynton and Barnstaple Railway. Retrieved 5 February 2017.
  7. "Project Yeo". Lynton and Barnstaple Railway. Retrieved 5 February 2017.
  8. "Engines". Fairbourne Railway. Retrieved 14 March 2024.
  9. "South Devon Miniature Railway 7 ¼ inch". Miniature Railway World. Retrieved 5 February 2017.

Related Research Articles

<span class="mw-page-title-main">OO9</span>

OO9, often also denoted as 009 or 00-9 is a model railway scale and gauge combination of 4 mm scale and 9 mm gauge tracks, which models a prototype track gauge of 2 ft 3 in. It is a common choice in the United Kingdom for the modelling of narrow-gauge railways whose prototype gauges lie approximately between 2 ft and 2 ft 6 in. The 9 mm track gauge is used by N gauge model railways, a common commercial scale, which means that a selection of wheels, track, and mechanisms is readily available.

<span class="mw-page-title-main">16 mm scale</span>

16 mm to 1 foot or 1:19.05 is a popular scale of model railway in the UK which represents narrow gauge prototypes. The most common gauge for such railways is 32 mm, representing 2 ft gauge prototypes. This scale/gauge combination is sometimes referred to as "SM32" and is often used for model railways that run in gardens, being large enough to easily accommodate live steam models. The next most common gauge is 45 mm, which represents the theoretical non-existent gauge 2 feet 9+34 inches (857 mm). This gauge is commonly used to portray prototypes between 2 ft 6 in and 3 ft gauge.

<span class="mw-page-title-main">Fairbourne Railway</span> Welsh miniature railway

The Fairbourne Railway is a 12+14 in gauge miniature railway running for 2 miles (3.2 km) from the village of Fairbourne on the Mid-Wales coast, alongside the beach to the end of a peninsula at Barmouth Ferry railway station, where there is a connection with the Barmouth Ferry across the Mawddach estuary to the seaside resort of Barmouth.

<span class="mw-page-title-main">Lynton and Barnstaple Railway</span> Narrow gauge railway in Devon, England

The Lynton and Barnstaple Railway (L&B) opened as an independent railway in May 1898. It was a single track, 1 ft 11+12 in narrow gauge railway and was slightly over 19 miles (31 km) long running through the rugged and picturesque area bordering Exmoor in North Devon, England. Although opened after the Light Railways Act 1896 came into force, it was authorised and constructed prior to that act. Therefore, as with all other railways, it was authorised under its own Act of Parliament and built to higher standards than similar railways of the time. In the United Kingdom it was notable as being the only narrow gauge line required to use main-line standard signalling. For a short period the line earned a modest return for shareholders, but for most of its life the L&B made a loss. In 1923, the L&B was taken over by the Southern Railway, and eventually closed in September 1935.

<span class="mw-page-title-main">British narrow-gauge railways</span> History of British narrow-gauge railways

There were more than a thousand British narrow-gauge railways ranging from large, historically significant common carriers to small, short-lived industrial railways. Many notable events in British railway history happened on narrow-gauge railways including the first use of steam locomotives, the first public railway and the first preserved railway.

<span class="mw-page-title-main">Manning Wardle</span>

Manning Wardle was a steam locomotive manufacturer based in Hunslet, Leeds, West Yorkshire, England.

<i>Lyn</i> (locomotive)

Lyn was a 2-4-2 tank steam locomotive built by the Baldwin Locomotive Works in 1898 for the Lynton and Barnstaple Railway in England. While the original Lyn was scrapped in 1935, a complete recreation of the locomotive exists, having been completed in 2017, and bears the same name as its precursor.

Lew was a Manning Wardle 2-6-2T built in 1925 for the narrow gauge Lynton and Barnstaple Railway.

<span class="mw-page-title-main">On30 gauge</span>

On30gauge is the modelling of narrow gauge railways in O scale on HO gauge track in 1:48 scale ratio by American and Australian model railroaders, in 1:43.5 scale ratio by British and French model railroaders and 1:45 by Continental European model railroaders.

The Rolling stock of the Lynton and Barnstaple Railway was one of the most distinctive aspects of the 1 ft 11+12 in narrow gauge line which ran for almost twenty miles across Exmoor in North Devon, England, from 1898 to 1935.

<span class="mw-page-title-main">Réseau Guerlédan</span>

Réseau Guerlédan was a short-lived railway in Côtes-du-Nord which operated from 1978 to 1979.

<span class="mw-page-title-main">Statfold Barn Railway</span>

The Statfold Barn Railway is a narrow gauge railway based near Tamworth, Staffordshire and partially in Warwickshire, England. Founded by engineering entrepreneur Graham Lee and his wife Carol at their farm-based home, they originally designed what is still termed the garden railway, in which Graham could run his trains and Carol could design an extensive English country garden around a lake.

Winson Engineering was a British manufacturer of narrow gauge and miniature railway steam locomotives and rolling stock during the 1990s. It built several new locomotives for heritage railways as well as undertaking major rebuilds of existing locomotives.

<span class="mw-page-title-main">Saltwood Miniature Railway</span>

Saltwood Miniature Railway was a 7+14 in gauge miniature railway which first opened in Sheffield, but subsequently relocated to Saltwood in Kent, England. It closed in 1987.

<span class="mw-page-title-main">Shuzenji Romney Railway</span>

The Shuzenji Romney Railway is a 1.2 km, 15 in gauge ridable miniature railway located in Niji-no-Sato in Izu, Shizuoka, on the Izu Peninsula in Japan. It is based on the English Romney, Hythe & Dymchurch Railway on the English Channel coast in Kent, which opened in 1927. The railway operates using a mixture of steam and diesel locomotives and enclosed saloon carriages. Its primary two steam engines were built by the Ravenglass and Eskdale Railway in Cumbria, England, and are based on that line's 1976 Northern Rock 2-6-2 steam locomotive. Its No. 2 locomotive Ernest W. Twining was acquired from the Fairbourne Railway in Wales when that line converted to 12+14 in gauge. There is also a small 15-inch gauge railway museum.

Lyd or LYD may refer to:

Thorne Memorial Park Miniature Railway is a 7+14 in gauge and 5 in gauge miniature railway built in 1998 in Thorne, South Yorkshire, England, operating on two loops within the park.

<i>Lyd</i> (locomotive)

Lyd is a narrow gauge steam locomotive built by the Ffestiniog Railway in their Boston Lodge shops over a period of 15 years.

David C. Curwen was an English miniature railway steam locomotive mechanical engineer.