Chemoproteomics

Last updated

Chemoproteomics (also known as chemical proteomics) entails a broad array of techniques used to identify and interrogate protein-small molecule interactions. [1] Chemoproteomics complements phenotypic drug discovery, a paradigm that aims to discover lead compounds on the basis of alleviating a disease phenotype, as opposed to target-based drug discovery (reverse pharmacology), in which lead compounds are designed to interact with predetermined disease-driving biological targets. [2] As phenotypic drug discovery assays do not provide confirmation of a compound's mechanism of action, chemoproteomics provides valuable follow-up strategies to narrow down potential targets and eventually validate a molecule's mechanism of action. [2] Chemoproteomics also attempts to address the inherent challenge of drug promiscuity in small molecule drug discovery by analyzing protein-small molecule interactions on a proteome-wide scale. A major goal of chemoproteomics is to characterize the interactome of drug candidates to gain insight into mechanisms of off-target toxicity and polypharmacology. [3]

Contents

Chemoproteomics assays can be stratified into three basic types. Solution-based approaches involve the use of drug analogs that chemically modify target proteins in solution, tagging them for identification. Immobilization-based approaches seek to isolate potential targets or ligands by anchoring their binding partners to an immobile support. Derivatization-free approaches aim to infer drug-target interactions by observing changes in protein stability or drug chromatography upon binding. Computational techniques complement the chemoproteomic toolkit as parallel lines of evidence supporting potential drug-target pairs, and are used to generate structural models that inform lead optimization. Several targets of high profile drugs have been identified using chemoproteomics, and the continued improvement of mass spectrometer sensitivity and chemical probe technology indicates that chemoproteomics will play a large role in future drug discovery.

Background

Context

An example quantitative proteomics workflow. Protein extracts from different samples are extracted and digested using trypsin. Separate samples are labeled using individual isobaric tandem mass tags (TMTs), then labeled samples are pooled. The sample origin of each peptide can be discerned from the TMT attached to it. Labeled peptides are then detected and fragmented by LC-MS/MS, and quantified by comparing relative amounts of TMT fragments in each mass spectrum. This image was adapted from BioRender.com. Quantitative Proteomics.png
An example quantitative proteomics workflow. Protein extracts from different samples are extracted and digested using trypsin. Separate samples are labeled using individual isobaric tandem mass tags (TMTs), then labeled samples are pooled. The sample origin of each peptide can be discerned from the TMT attached to it. Labeled peptides are then detected and fragmented by LC-MS/MS, and quantified by comparing relative amounts of TMT fragments in each mass spectrum. This image was adapted from BioRender.com.

The conclusion of the Human Genome Project was followed with hope for a new paradigm in treating disease. Many fatal and intractable diseases were able to be mapped to specific genes, providing a starting point to better understand the roles of their protein products in illness. Drug discovery has made use of animal knock-out models that highlight the impact of a protein's absence, particularly in the development of disease, and medicinal chemists have leveraged computational chemistry to generate high affinity compounds against disease-causing proteins. [3] Yet FDA drug approval rates have been on the decline over the last decade. [4] One potential source of drug failure is the disconnect between early and late drug discovery. [3] Early drug discovery focuses on genetic validation of a target, which is a strong predictor of success, but knock-out and overexpression systems are simplistic. Spatially and temporally conditional knock-out/knock-in systems have improved the level of nuance in in vivo analysis of protein function, but still fail to completely parallel the systemic breadth of pharmacological action. [3] For example, drugs often act through multiple mechanisms, and often work best by engaging targets partially. [3] Chemoproteomic tools offer a solution to bridge the gap between a genetic understanding of disease and a pharmacological understanding of drug action by identifying the many proteins involved in therapeutic success.

Basic tools

The chemoproteomic toolkit is anchored by liquid chromatography-tandem mass spectrometry (LC-MS/MS or LC-MS) based quantitative proteomics, which allows for the near complete identification and relative quantification of complex proteomes in biological samples. [5] In addition to proteomic analysis, the detection of post-translational modifications, like phosphorylation, glycosylation, acetylation, and recently ubiquitination, which give insight into the functional state of a cell, is also possible. [5] The vast majority of proteomic studies are analyzed using high-resolution orbitrap mass spectrometers and samples are processed using a generalizable workflow. A standard procedure begins with sample lysis, in which proteins are extracted into a denaturing buffer containing salts, an agent that reduces disulfide bonds, such as dithiothreitol, and an alkylating agent that caps thiol groups, such as iodoacetamide. Denatured proteins are proteolysed, often with trypsin, and then separated from other mixture components prior to analysis via LC-MS/MS. For more accurate quantification, different samples can be reacted with isobaric tandem mass tags (TMTs), a form of chemical barcode that allows for sample multiplexing, and then pooled. [5]

Solution-based approaches

A prototypical activity-based protein profiling probe. A covalent warhead and reporter tag are connected by a linker group. The warhead covalently bonds with the active site of an enzyme and the reporter tag is used to enrich or detect the labeled protein. Fluorophosphonate-biotin is an example of an activity-based probe that targets serine hydrolases. It is connected to a biotinylated enrichment handle by an alkane chain. This image was made using BioRender.com. Affinity Based Probe.png
A prototypical activity-based protein profiling probe. A covalent warhead and reporter tag are connected by a linker group. The warhead covalently bonds with the active site of an enzyme and the reporter tag is used to enrich or detect the labeled protein. Fluorophosphonate-biotin is an example of an activity-based probe that targets serine hydrolases. It is connected to a biotinylated enrichment handle by an alkane chain. This image was made using BioRender.com.

Broad proteomic and transcriptomic profiling has led to innumerable advances in the biomedical space, but the characterization of RNA and protein expression is limited in its ability to inform on the functional characteristics of proteins. Given that transcript and protein expression information leave gaps in knowledge surrounding the effects of post-translational modifications and protein-protein interactions on enzyme activity, and that enzyme activity varies across cell types, disease states, and physiological conditions, specialized tools are required to profile enzyme activity across contexts. [6] Additionally, many identified enzymes have not been sufficiently characterized to yield actionable mechanisms on which to base functional assays. Without a basis for a functional biochemical readout, chemical tools are required to detect drug-protein interactions.

Activity-based protein profiling

Activity-based protein profiling (ABPP, also activity-based proteomics) is a technique that was developed to monitor the availability of enzymatic active sites to their endogenous ligands. [5] ABPP uses specially designed probes that enter and form a covalent bond with an enzyme's active site, which confirms that the enzyme is an active state. [7] The probe is typically an analog of the drug whose mechanism is being studied, so covalent labeling of an enzyme is indicative of drug binding. ABPP probes are designed with three key functional units: (1) a site-directed covalent warhead (reactive group); (2) a reporter tag, such as biotin or rhodamine; and (3) a linker group. [8] The site-directed covalent warhead, also called a covalent modifier, is an electrophile that covalently modifies a serine, cysteine, or lysine residue in the enzyme's active site and prevents future interactions with other ligands. [7] ABPP probes are generally designed against enzymatic classes, and thus can provide systems-level information about the impact of cell state on enzymatic networks. The reporter tag is used to confirm labeling of the enzyme with the reactive group and can vary depending on the downstream readout. The most widely used reporters are fluorescent moieties that enable imaging and affinity tags, such as biotin, that allow for pull-down of labeled enzymes and analysis via mass spectrometry. There are drawbacks to each strategy, namely that fluorescent reporters do not allow for enrichment for proteomic analysis, while biotin-based affinity tags co-purify with endogenously biotinylated proteins. [8] A linker group is used to connect the reactive group to the reporter, ideally in a manner that does not alter the activity of probe. The most common linker groups are long alkyl chains, derivatized PEGs, and modified polypeptides. [5]

Under the assumption that enzymes vary in their structure, function, and associations depending on a system's physiological or developmental state, it can be inferred that the accessibility of an enzyme's active site will also vary. [6] Therefore, the ability of an ABPP probe to label an enzyme will also vary across conditions. Thus, the binding of a probe can reveal information around an enzyme's functional characteristics in different contexts. High-throughput screening has benefitted from ABPP, particularly in the area of competitive inhibition assays, in which biological samples are pre-incubated with drug candidates, then made to compete with ABPP probes for binding to target enzymes. Compounds with high affinity to their targets will prevent binding of the probe, and the degree of probe binding can be used as an indication of compound affinity. Because ABPP probes label classes of enzymes, this approach can also be used to profile drug selectivity, as highly selective compounds will ideally outcompete probes at only a small number of proteins. [8]

A prototypical photoaffinity probe. A drug scaffold acts as the first interaction site between probe and protein. A photoreactive group, here an arylazide, can be activated by light to form a reactive intermediate that bonds with a non-specific site on the protein. A tag can then be used to enrich and identify or image and detect the target. This image was made using BioRender.com. Photoaffinity labeling.png
A prototypical photoaffinity probe.A drug scaffold acts as the first interaction site between probe and protein. A photoreactive group, here an arylazide, can be activated by light to form a reactive intermediate that bonds with a non-specific site on the protein. A tag can then be used to enrich and identify or image and detect the target. This image was made using BioRender.com.

Photoaffinity labeling

Unlike ABPP, which results in protein labeling upon probe binding, photoaffinity labeling probes require activation by photolysis before covalent bonding to a protein occurs. [7] The presence of a photoreactive group makes this possible. [7] These probes are composed of three connected moieties: (1) a drug scaffold; (2) a photoreactive group, such as an phenylazide, phenyldiazirine, or benzophenone; and (3) an identification tag, such as biotin, a fluorescent dye, or a click chemistry handle. [9] The drug scaffold is typically an analog of a drug whose mechanism is being studied, and, importantly, binds to the target reversibly, which better mimics the interaction between most drugs and their targets. [9] There are several varieties of photoreactive groups, but they are fundamentally different from ABPP probes: while ABPP specifically labels nucleophilic amino acids in a target's active site, photoaffinity labeling is non-specific, and thus is applicable to labeling a wider range of targets. [7] The identification tag will vary depending on the type of analysis being done: biotin and click chemistry handles are suitable for enrichment of labeled proteins prior to mass spectrometry based identification, while fluorescent dyes are used when using a gel-based imaging method, such as SDS-PAGE, to validate interaction with a target. [7] [9]

Phenylazide, a photoreactive group commonly used in photoaffinity labeling. Phenyl azide Structural Formula V1.svg
Phenylazide, a photoreactive group commonly used in photoaffinity labeling.

Because photoaffinity probes are multifunctional, they are difficult to design. Chemists incorporate the same principles of structure-activity relationship modeling into photoaffinity probes that apply to drugs, but must do so without compromising the drug scaffold's activity or the photoreactive group's ability to bond. [9] Since photoreactive groups bond indiscriminately, improper design can cause the probe to label itself or non-target proteins. The probe must remain stable in storage, across buffers, at various pH levels, and in living systems to ensure that labeling occurs only when exposed to light. Activation by light must also be fine-tuned, as radiation can damage cells. [9]

Immobilization-based approaches

Three strategies for immobilization-based target identification. In all cases, protein mixtures are incubated with the ligand and bound targets are detected downstream. (1A) Ligands are attached to a solid support, such as a microbead or chromatography column, via derivatization. (1B) Ligands bind targets in solution, and are then pulled down by an enrichment handle, such as biotin. (1C) Ligands contain a cross-linking group, which is activated, often with light, labeling the target. An enrichment handle is used to pull down the labeled target. (2) After attachment, the target can be eluted from the ligand or trypsinized directly on-bead. Trypsinized peptides are analyzed via LC-MS/MS. This image was adapted from BioRender.com. Immobilization Strategies for Target Identification.png
Three strategies for immobilization-based target identification. In all cases, protein mixtures are incubated with the ligand and bound targets are detected downstream. (1A) Ligands are attached to a solid support, such as a microbead or chromatography column, via derivatization. (1B) Ligands bind targets in solution, and are then pulled down by an enrichment handle, such as biotin. (1C) Ligands contain a cross-linking group, which is activated, often with light, labeling the target. An enrichment handle is used to pull down the labeled target. (2) After attachment, the target can be eluted from the ligand or trypsinized directly on-bead. Trypsinized peptides are analyzed via LC-MS/MS. This image was adapted from BioRender.com.

Immobilization-based chemoproteomic techniques encompass variations on microbead-based affinity pull-down, which is similar to immunoprecipitation, and affinity chromatography. In both cases, a solid support is used as an immobilization surface bearing a bait molecule. The bait molecule can be a potential drug if the investigator is trying to identify targets, or a target, such as an immobilized enzyme, if the investigator is screening for small molecules. [10] The bait is exposed to a mixture of potential binding partners, which can be identified after removing non-binding components.

Microbead-based immobilization

Microbead-based immobilization is a modular technique in that it allows the investigator to decide whether they wish to fish for protein targets from the proteome or drug-like compounds from chemical libraries. The macroscopic properties of microbeads make them amenable to relatively low labor enrichment applications, since they are easily to visualize and their bulk mass is readily removable protein solutions. [11] Microbeads were historically made of inert polymers, such as agarose and dextran, that are functionalized to attach a bait of choice. In the case of using proteins as bait, amine functional groups are common linkers to facilitate attachment. More modern approaches have benefitted from the popularization of dynabeads, a type of magnetic microbead, which enable magnetic separation of bead-immobilized analytes from treated samples. Magnetic beads exhibit superparamagnetic properties, which make them very easy to remove from solution using an external magnet. [12] In a simplified workflow, magnetic beads are used to immobilize a protein target, then the beads are mixed with a chemical library to screen for potential ligands. High-affinity ligands bind to the immobilized target and resist removal by washing, so they are enriched in the sample. Conversely, a ligand of interest can be immobilized and screened against proteome proteins by incubation with a lysate. [12]

Hybrid solution- and immobilization-based strategies have been applied, in which ligands functionalized with an enrichment tag, such as biotin, are allowed to float freely in solution and find their target proteins. After an incubation period, ligand-protein complexes can be reacted with streptavidin-coated beads, which bind the biotin tag and allow for pull-down and identification of interaction partners. This technology can be extended to assist with preparation of samples for ABPP and photoaffinity labeling. While immobilization approaches have been reproducible and successful, it is impossible to avoid the limitation of immobilization-induced steric hindrance, which interferes with induced fit. Another drawback is non-specific adsorption of both proteins and small molecules to the bead surface, which has the potential to generate false positives. [10]

Affinity chromatography

Affinity chromatography emerged in the 1950s as a rarely used method used to purify enzymes; it has since seen mainstream use and is the oldest among chemoproteomic approaches. [13] Affinity chromatography is performed following one of two basic formats: ligand immobilization or target immobilization. Under the ligand immobilization format, a ligand of interest - often a drug lead - is immobilized within a chromatography column and acts as the stationary phase. A complex sample consisting of many proteins, such as a cell lysate, is passed through the column and the target of interest binds to the immobilized ligand while other sample components pass through the column unretained. Under the target immobilization format, a target of interest - often a disease-relevant protein - is immobilized within a chromatography column and acts as the stationary phase. Pooled compound libraries are then passed through the column in an application buffer, ligands are retained through binding interactions with the stationary phase, and other compounds pass through the column unretained. [14] In both cases, retained analytes can be eluted from the column and identified using mass spectrometry. A table of elution strategies is provided below.

Affinity Chromatography Elution Strategies [14]
StrategyDescriptionMechanism(s)AdvantagesDisadvantages
Non-specific elutionBound ligands are released after a change in mobile phase composition shifts the local chemical environment of the stationary phase; protein conformation is changed, causing release of ligands; alternatively solvent polarity is decreased, causing bound ligands to preferentially distribute into the mobile phase. pH; ionic strength; polarity.Can be fine tuned

to elute specific

proteins or ligands.

Elution conditions may not be strong enough to elute unoptimized compounds.
Isocratic elutionThe elution buffer is identical to the application buffer, ligands move readily through the column but at different speeds according to their underlying affinity for the target.Transient interactions with stationary phase.Allows for comparison of compound affinities.Can be time consuming; requires continuous fraction collection.
Biospecific elution Analytes are eluted by adding a high concentration of a high-affinity binding partner to the mobile phase, bound analytes are competed off of the stationary phase; the additive can be either a protein that scavenges bound ligands or a small molecule that displaces them. Competitive binding.Allows for concentration of analytes with immediate elution; high recovery.Compounds not previously tested may have higher affinity than the elution additive.

Derivatization-free approaches

An example thermal proteome profiling workflow. Binding of a drug to a protein often leads to ligand-induced stabilization of the protein (1), which can be measured by comparing the amount of non-denatured protein remaining in a drug-treated sample to an untreated control. The change in protein stability can be visualized as a rightward shift in its stability curve (2). This image was adapted from BioRender.com. Thermal Proteome Profiling.png
An example thermal proteome profiling workflow. Binding of a drug to a protein often leads to ligand-induced stabilization of the protein (1), which can be measured by comparing the amount of non-denatured protein remaining in a drug-treated sample to an untreated control. The change in protein stability can be visualized as a rightward shift in its stability curve (2). This image was adapted from BioRender.com.

While the approaches above have shown success, they are inherently limited by their need for derivatization, which jeopardizes the affinity of the interaction that derivatized compounds are said to emulate and introduces steric hindrance. [10] Immobilized ligands and targets are limited in their ability to move freely through space in a way that replicates the native protein-ligand interaction, and conformational change from induced fit is often limited when proteins or drugs are immobilized. Probe-based approaches also alter the three-dimensional nature of the ligand-protein interaction by introducing functional groups to the ligand, which can alter compound activity. Derivatization-free approaches aim to infer interactions by proxy, often through observations of changes to protein stability upon binding, and sometimes through chromatographic co-elution. [15]

The stability-based methods below are thought to work due to ligand-induced shifts in equilibrium concentrations of protein conformational states. A single protein type in solution may be represented by individual molecules in a variety of conformations, with many of them different from one another despite being identical in amino acid sequence. Upon binding a drug, the majority of ligand-bound protein enters an energetically favorable conformation, and moves away from the unpredictable distribution of less stable conformers. [16] Thus, ligand binding is said to stabilize proteins, making them resistant to thermal, enzymatic and chemical degradation. Some examples of stability-based derivatization-free approaches follow.

Thermal proteome profiling (TPP)

Thermal proteome profiling (also, Cellular Thermal Shift Assay) is recently popularized strategy to infer ligand-protein interactions from shifts in protein thermal stability induced by ligand binding. In a typical assay setup, protein-containing samples are exposed to a ligand of choice, then those samples are aliquoted and heated to separate individual temperature points. Upon binding to a ligand, a protein's thermal stability is expected to increase, so ligand-bound proteins will be more resistant to thermal denaturation. After heating, the amount of non-denatured protein remaining is analyzed using quantitative proteomics and stability curves are generated. Upon comparison to an untreated stability curve, the treated curve is expected to shift to the right, indicating that ligand-induced stabilization occurred. Historically, thermal proteome profiling has been assessed using a western blot against a known target of interest. With the advent of high resolution Orbitrap mass spectrometers, this type of experiment can be executed on a proteome-wide scale and stability curves can be generated for thousands of proteins at once. Thermal proteome profiling has been successfully performed in vitro, in situ, and in vivo . When coupled with mass spectrometry, this technique is referred to as the Mass Spectrometry Cellular Thermal Shift Assay (MS-CETSA). [17]

An example drug affinity responsive target stability (DARTS) workflow. Binding of a drug to a protein often leads to ligand-induced stabilization of the protein. In DARTS, drug and control treated proteins are subjected to limited proteolysis and the extent of protein digestion can either be visualized on a gel or measured by mass spectrometry. Drug binding is expected to result in an increase in signal of the stabilized protein. This image was made using BioRender.com. DARTS.png
An example drug affinity responsive target stability (DARTS) workflow.Binding of a drug to a protein often leads to ligand-induced stabilization of the protein. In DARTS, drug and control treated proteins are subjected to limited proteolysis and the extent of protein digestion can either be visualized on a gel or measured by mass spectrometry. Drug binding is expected to result in an increase in signal of the stabilized protein.This image was made using BioRender.com.

Drug affinity responsive target stability (DARTS)

The Drug Affinity Responsive Target Stability assay follows a similar basic assumption to TPP – that protein stability is increased by ligand binding. In DARTS, however, protein stability is assessed in response to digestion by a protease. Briefly, a sample of cell lysate is incubated with a small molecule of interest, the sample is split into aliquots, and each aliquot goes through limited proteolysis after addition of protease. Limited proteolysis is critical, since complete proteolysis would render even a ligand-bound protein completely digested. Samples are then analyzed via SDS-PAGE to assess differences in extent of digestion, and bands are then excised and analyzed via mass spectrometry to confirm the identities of proteins that are resist proteolysis. Alternatively, if the target is already suspected and is being tested for validation, a western blot protocol can be used to identify protein directly. [18]

An example stability of proteins from rates of oxidation (SPROX) workflow. Binding of a drug to a protein often leads to ligand-induced stabilization of the protein. In SPROX, drug and control treated proteins samples are exposed to increasing amounts of a denaturant. Hydrogen peroxide is added to oxidize exposed methionine residues. Drug binding is expected to protect methionine from oxidation by stabilizing the folded form of a protein. Extent of oxidation can be monitored by mass spectrometry and used to generate stability curves. This image was made using BioRender.com. SPROX.png
An example stability of proteins from rates of oxidation (SPROX) workflow.Binding of a drug to a protein often leads to ligand-induced stabilization of the protein. In SPROX, drug and control treated proteins samples are exposed to increasing amounts of a denaturant. Hydrogen peroxide is added to oxidize exposed methionine residues. Drug binding is expected to protect methionine from oxidation by stabilizing the folded form of a protein. Extent of oxidation can be monitored by mass spectrometry and used to generate stability curves.This image was made using BioRender.com.

Stability of proteins from rates of oxidation (SPROX)

Stability of Proteins from Rates of Oxidation also rests upon the assumption that ligand binding confers protection to proteins from manners of degradation, this time from oxidation of methionine residues. In SPROX, a lysate is split and treated with drug or a DMSO control, then each group is further aliquoted into separate samples with increasing concentrations of the chaotrope and denaturant guanidinium hydrochloride (GuHCl). Depending on the concentration of GuHCl, proteins will unfold to varying degrees. Each sample is then reacted with hydrogen peroxide, which oxidizes methionine residues. Proteins that are stabilized by the drug will remain folded at higher concentrations of GuHCl and will experience less methionine oxidation. Oxidized methionine residues can be quantified via LC-MS/MS and used to generate methionine stability curves, which are a proxy for drug binding. There are drawbacks to the SPROX assay, namely that the only relevant peptides from SPROX samples are those with methionine residues, which account for approximately one-third of peptides, and for which there are currently no viable enrichment techniques. Only those methionines that are exposed to oxidation provide meaningful information, and not all differences in methionine oxidation are consistent with protein stabilization. Without enrichment, LC-MS/MS analysis of these peptides is challenging, as the contribution of other sample components to mass spectrometer noise can drown out relevant signal. Therefore, SPROX samples require fractionation to concentrate peptides of interest prior to LC-MS/MS analysis. [16]

Affinity selection-mass spectrometry

While adoption of affinity selection-mass spectrometry (AS-MS) has led to an expansion of assay formats, [19] the general technique follows a simple scheme. Protein targets are incubated with small molecules to allow for the formation of stable ligand-protein complexes, unbound small molecules are removed from the mixture, and the components of remaining ligand-protein complexes are analyzed using mass spectrometry. [19] The bound ligands identified are then categorized as hits and can be used to provide a starting point for lead generation. Since AS-MS measures binding in an unbiased manner, a hit does not need to be tied to a functional readout, opening the possibility of identifying drugs that act beyond active sites, such as allosteric modulators and chemical chaperones, all in a single assay. [20] Because small molecules can be directly identified by their exact mass, no derivatization is needed to confirm the validity of a hit. [20] Among derivatization- and label-free approaches, AS-MS has the unique advantage of being amenable to the assessment of multiple test compounds per experiment—as many as 20,000 compounds per experiment have been reported in the literature, and one group has reported assaying chemical libraries against heterogeneous protein pools. [20] The basic steps of AS-MS are described in more detail below.

Affinity selection via gel filtration. A pool of test compounds is added to a protein sample, which is passed through a gel filtration column. Protein-bound compounds move around the beads and exit the column quickly. Unbound compounds are small enough to travel through beads and take a longer path before elution. This image was made using BioRender.com. TIFF Workflow copy (3).png
Affinity selection via gel filtration.A pool of test compounds is added to a protein sample, which is passed through a gel filtration column. Protein-bound compounds move around the beads and exit the column quickly. Unbound compounds are small enough to travel through beads and take a longer path before elution. This image was made using BioRender.com.

Affinity selection

A generalized AS-MS workflow begins with the pre-incubation of purified protein solutions (i.e. target proteins) with chemical libraries in microplates. Assays can be designed to contain sufficiently high protein concentrations to prevent competition for binding sites between structural analogs, ensuring that hits across a range of affinities can be identified; inversely, assays can contain low protein concentrations to allow for distinction between high and low affinity analogs and to inform structure-activity relationships. [20] The choice of a chemical library is less stringent than other high-throughput screening strategies owing to the lack of functional readouts, which would otherwise require deconvolution of the source compound that generates biological activity. Thus, the typical range for AS-MS is 400-3,000 compounds per pool. [20] Other considerations for screening are more practical, such as a need to balance desired compound concentration, which is usually in the micromolar range, with the fact that compound stock solutions are typically stored as 10 millimolar solutions, effectively capping the number of compounds screened in the thousands. [20] After appropriate test compounds and targets are selected and incubated, ligand-protein complexes can be separated by a variety of means. [19]

Separation of unbound small molecules and ligand-protein complexes

Affinity selection is followed by the removal of unbound small molecules via ultrafiltration or size-exclusion chromatography, making only protein-bound ligands available for downstream analysis. [19] Several types of ultrafiltration have been reported with varying degrees of throughput, including pressure-based, centrifugal, and precipitation-based ultrafiltration. [19] Under both pressure-based and centrifugal formats, unbound small molecules are forced through a semipermeable membrane that excludes proteins on the basis of size. Multiple washing steps are required after ultrafiltration to ensure complete removal of unbound small molecules. [19] Ultrafiltration can also be confounded by non-specific adsorption of unbound small molecules to the membrane. [19] A group at the University of Illinois published a screening strategy involving amyloid-beta, in which ligands were used to stabilize the protein and prevent its aggregation. Ultrafiltration was used to precipitate aggregated amyloid-beta and remove unbound ligands, while the ligand-stabilized protein was detected and quantified using mass spectrometry. [19]

Size-exclusion chromatography (SEC) is more widely used in industrial drug discovery and has the advantage of more efficient removal of unbound compounds as compared to ultrafiltration. [19] Size-exclusion approaches have been described in both high-performance liquid chromatography (HPLC) based and spin column formats. [19] In either case, a mixture of unbound ligands, proteins, ligand-protein complexes is passed through a column of porous beads. Ligand-protein complexes are excluded from entering the beads and exit the column quickly, while unbound ligands must travel through the beads and are retained by the column for a longer time. Ligands that elute from the column early on are therefore inferred to be bound to a protein. [19] The automated ligand identification system (ALIS), developed by Schering-Plough, uses a combined HPLC-based SEC to liquid chromatography-mass spectrometry (LC-MS) system that separates ligand-protein complexes from unbound ligands using SEC and diverts the complex toward an LC-MS system for on-line analysis of bound ligands. [19] Novartis' SpeedScreen uses SEC in 96-well spin column format, also known as gel filtration chromatography, which allows for simultaneous removal of unbound ligands from up to 96 samples. [21] Samples are also passed through porous beads, but centrifugation is used to move the sample through the column. [21] SpeedScreen is not coupled to an LC-MS system and requires further processing prior to final analysis. In this case, ligands must be freed from their targets and analyzed separately.

Analysis of bound ligands

The final step requires bioanalytical separation of bound ligands from their targets, and subsequent identification of ligands using liquid chromatography-mass spectrometry. [20] AS-MS offers means for identifying small molecule-protein interactions either directly - through top-down proteomic detection of intact complexes - or indirectly - through denaturation of small molecule-protein complexes followed by identification of small molecules using mass spectrometry. [19] The top-down approach requires direct infusion of the complex into an electrospray ionization mass spectrometry source under conditions gentle enough to preserve the interaction and maintain its integrity in the transition from liquid to gas. [19] While this was shown to be possible by Ganem and Henion in 1991, it is not suitable for high throughput. [19] Interestingly, electron capture dissociation, which is typically used in structure elucidation of peptides, has been used to identify ligand binding sites during top-down analysis. [19] A simpler method for analysis of bound ligands uses a protein precipitation extraction to denature proteins and release ligands into the precipitation solution, which can then be diluted and identified on an LC-MS system.

An example target identification by chromatographic co-elution (TICC) workflow. Drug-spiked lysate is fractionated using ion exchange chromatography. Fractions are collected every minute, then analyzed for both drug and protein content using LC-MS/MS. Drug and protein elution profiles are constructed and correlated. Target identification is supported by a strong correlation in elution profile between a drug and a protein. This image was made using BioRender.com. Target identification by chromatographic co-elution.png
An example target identification by chromatographic co-elution (TICC) workflow.Drug-spiked lysate is fractionated using ion exchange chromatography. Fractions are collected every minute, then analyzed for both drug and protein content using LC-MS/MS. Drug and protein elution profiles are constructed and correlated. Target identification is supported by a strong correlation in elution profile between a drug and a protein.This image was made using BioRender.com.

Target identification by chromatographic co-elution (TICC)

Target identification by chromatographic co-elution does not rely on differences in protein stability after drug treatment. Instead, it rests on the assumption that drugs form stable complexes with their target proteins, and that those complexes are robust enough to survive a chromatographic separation. In a typical workflow, a cell lysate is incubated with a drug, then the lysate is injected onto an ion-exchange chromatography system and fractionated. Lysate proteins are eluted along an ionic strength gradient and fractions are collected over short time intervals. Each fraction is analyzed by LC-MS/MS for both protein and drug content. Individual proteins elute with characteristic profiles, and pre-incubated drugs should mirror the elution profiles of the targets they complex with. Correlation of drug and protein elution profiles allows for targets to be narrowed down and inferred. [22]

Computational approaches

Molecular docking simulations

The development and application of bench-top chemoproteomics assays is often time consuming and cost-prohibitive. Molecular docking simulations have emerged as relatively low-cost, high-throughput means for ranking the strength of small molecule-protein interactions. Molecular docking requires accurate modeling of both ligand and protein conformation at atomic resolution, and is therefore aided by empirical determination of protein structure, often through orthogonal methods such as x-ray crystallography and cryogenic electron microscopy. Molecular docking strategies are categorized by the type of information that is already known about the ligand and protein of interest. [23]

Ligand-based methods

An example pharmacophore model. Each sphere represents a different scorable feature. PharmacophoreModel example.svg
An example pharmacophore model. Each sphere represents a different scorable feature.

When a bioactive ligand with a known structure is to be screened against a protein with limited structural information, modeling is done with regard to ligand structure. Pharmacophore modeling identifies key electronic and structural features that are associated with therapeutic activity across similarly bioactive structural analogs, and accordingly requires large libraries with corresponding experimental data to enhance predictive power. Compound structures are superimposed virtually and common elements are scored on the basis of their tendency toward bioactivity. [24] The move away from lock-and-key based modeling toward induced-fit based modeling has improved binding predictions but has also given rise to the challenge of modeling ligand flexibility, which requires building a database of conformational models and uses large amounts of data storage space. Another approach is the so-called on-the-fly method, in which conformational models are tested during the process of pharmacophore modeling, without a database; this method requires significantly less storage space at the cost of high computing time. [24] A second challenge arises from the decision of how to superimpose analog structures. A common approach is to use a least-squares regression for superimposition, but this requires user-selected anchor points and therefore introduces human bias into the process. Pharmacophore models require training data sets, giving rise to another challenge—selection of the appropriate library of compounds to adequately train models. Data set size and chemical diversity significantly affect performance of the downstream product. [25]

Structure-based methods

Ideally, the structure of a drug target is known, which allows for structure-based pharmacophore modeling. A structure-based model integrates key structural properties of the protein's binding site, such as the spatial distribution of interaction points, with features identified from ligand based pharmacophore models to generate a holistic simulation of the ligand-protein interaction. A major challenge in structure-based modeling is to narrow down pharmacophore features, of which many are initially identified, to a set of high priority features, as modeling too many features is a computational challenge. Another challenge is the incompatibility of pharmacophore modeling with quantitative structure-activity relationship (QSAR) profiling. Accurate QSAR models rely on inclusion of many potential targets, not just the therapeutic target. For example, important pharmacophores may yield high-affinity interactions with therapeutic targets, but they may also lead to undesirable off-target activity, and they may also be substrates of metabolic enzymes, such as Cytochrome P450s. Therefore, pharmacophore modeling against therapeutic targets is only one component of the compound's total structure-activity relationship. [24]

Applications

Druggability

PROTAC: Proteolysis targeting chimera. PROTACs are heterobifunctional small molecules that contain a functional group that binds a target and another functional group that recruits an E3 ubiquitin ligase. Binding to both proteins induces proximity-based ubiquitination of the target by the E3 ubiquitin ligase, leading to target degradation. Proteolysis targeting chimera mechanism.svg
PROTAC: Proteolysis targeting chimera. PROTACs are heterobifunctional small molecules that contain a functional group that binds a target and another functional group that recruits an E3 ubiquitin ligase. Binding to both proteins induces proximity-based ubiquitination of the target by the E3 ubiquitin ligase, leading to target degradation.

Chemoproteomic strategies have been used to expand the scope of druggable targets. [26] While historically successful drugs target well-defined binding pockets of druggable proteins, these define only about 15% of the annotated proteome. [26] To continue growing our pharmacopoeia, bold approaches to ligand discovery are required. The use of ABPP has coincidentally reinvigorated the search for newly ligandable sites. ABPP probes, intentionally used to label enzyme active sites, have been found to label many nucleophilic regions on many different proteins unintentionally. Originally thought to be experimental noise, these unintended reactions have clued researchers to the presence of sites that can potentially be targeted by novel covalent drugs. This is particularly salient in the case of proteins with no enzymatic activity to inhibit, or with mutated drug resistant proteins. In any of these cases, proteins can potentially be targeted for degradation using the novel drug modality of proteolysis-targeting-chimeras (PROTACs). [26] PROTACs are heterobifunctional small molecules that are designed to interact with a target and an E3 ubiquitin ligase. The interaction brings the E3 ubiquitin ligase close enough to the target that the target is labeled for degradation. The existence of potential covalent binding sites across the proteome suggests that many drugs can be covalently targeted using such a modality. [26]

Drug repurposing

Chemoproteomics is at the forefront of drug repurposing. This is particularly relevant in the era of COVID-19, which saw a dire need to rapidly identify FDA approved drugs that have antiviral activity. [27] In this context, a phenotypic screen is usually employed to identify drugs with a desired effect in vitro , such as inhibition of viral plaque formation. If a drug produces a positive test, the next step is to determine whether it is acting on a known or novel target. Chemoproteomics is thus a follow-up to phenotypic screening. In the case of COVID-19, Friman et al investigated off-target effects of the broad-spectrum antiviral Remdesivir, which was among the first repurposed drugs to be used in the pandemic. [27] Remdesivir was tested via thermal proteome profiling in a HepG2 cellular thermal shift assay, along with the controversial drug hydroxychloroquine, and investigators discovered TRIP13 as a potential off-target of Remdesivir. [27]

High-throughput screening

Approved drugs are never identified as hits in high-throughput screens because the chemical libraries used in screening have not been optimized against any targets. However, methods like affinity chromatography and affinity selection-mass spectrometry are workhorses of the pharmaceutical industry, and AS-MS particularly has been documented to produce a significant number of hits across many classes of difficult-to-drug proteins. [20] This is due in large part to the sheer volume of ligands that can be screened in a single assay. Researchers at the iHuman Institute at ShanghaiTech University employed of scheme in which 20,000 compounds per pool were screened against A2AR, a difficult G-protein coupled receptor to drug, with a 0.12% hit rate, leading to several high affinity ligands. [20]

Real World Applications of Chemoproteomic Techniques
TechniqueBioactive LigandTargetDescriptionReference
Activity based protein profilingABX1431 MAGL Cesar et al optimized MAGL inhibitor ABX1431 using a competitive inhibition system. [28]
Photoaffinity labeling Chloroquine PfCRTLekostaj et al identified the chloroquine binding site on the Plasmodium chloroquine resistance transporter using photoaffinity labeling. [7]
Affinity chromatography Purvanolol CDKs, CK1 Knockaert et al confirmed CDKs and discovered CK1 as targets of purvanolol; CK1 is a Plasmodium protein, and purvanolol analogs have activity against Plasmodium. [29]
Thermal proteome profiling (CETSA) Remdesivir TRIP13 Friman et al identified TRIP13 as an off-target of Remdesivir after an investigation into off-target effects of repurposed COVID-19 drugs. [27]
Drug affinity responsive target stability Resveratrol EIF4A Lomenick et al discovered EIF4A as a target of the longevity-associated small molecule resveratrol. [18]
Stability of proteins from rates of oxidationManassantin A EEF1A1 Geer Wallace et al discovered EEF1A1 as a target of the potent antineoplastic natural product Manassantin A [15]
Affinity selection-mass spectrometryScreening compounds STING Merck & Co. used AS-MS to successfully screen for ligands against the difficult to drug STING protein, which has a large binding site and strong competing endogenous ligand [20]
Target identification by chromatographic co-elution4513-0042ERG6PChan et al identified the yeast protein ERG6P as a target of the antifungal natural product 4513-0042 and followed up with validation experiments [22]

See also

Related Research Articles

<span class="mw-page-title-main">Proteomics</span> Large-scale study of proteins

Proteomics is the large-scale study of proteins. Proteins are vital parts of living organisms, with many functions such as the formation of structural fibers of muscle tissue, enzymatic digestion of food, or synthesis and replication of DNA. In addition, other kinds of proteins include antibodies that protect an organism from infection, and hormones that send important signals throughout the body.

Glycomics is the comprehensive study of glycomes, including genetic, physiologic, pathologic, and other aspects. Glycomics "is the systematic study of all glycan structures of a given cell type or organism" and is a subset of glycobiology. The term glycomics is derived from the chemical prefix for sweetness or a sugar, "glyco-", and was formed to follow the omics naming convention established by genomics and proteomics.

<span class="mw-page-title-main">Glycome</span> Complete set of all sugars, free or bound, in an organism.

A glycome is the entire complement or complete set of all sugars, whether free or chemically bound in more complex molecules, of an organism. An alternative definition is the entirety of carbohydrates in a cell. The glycome may in fact be one of the most complex entities in nature. "Glycomics, analogous to genomics and proteomics, is the systematic study of all glycan structures of a given cell type or organism" and is a subset of glycobiology.

Affinity chromatography is a method of separating a biomolecule from a mixture, based on a highly specific macromolecular binding interaction between the biomolecule and another substance. The specific type of binding interaction depends on the biomolecule of interest; antigen and antibody, enzyme and substrate, receptor and ligand, or protein and nucleic acid binding interactions are frequently exploited for isolation of various biomolecules. Affinity chromatography is useful for its high selectivity and resolution of separation, compared to other chromatographic methods.

A protein microarray is a high-throughput method used to track the interactions and activities of proteins, and to determine their function, and determining function on a large scale. Its main advantage lies in the fact that large numbers of proteins can be tracked in parallel. The chip consists of a support surface such as a glass slide, nitrocellulose membrane, bead, or microtitre plate, to which an array of capture proteins is bound. Probe molecules, typically labeled with a fluorescent dye, are added to the array. Any reaction between the probe and the immobilised protein emits a fluorescent signal that is read by a laser scanner. Protein microarrays are rapid, automated, economical, and highly sensitive, consuming small quantities of samples and reagents. The concept and methodology of protein microarrays was first introduced and illustrated in antibody microarrays in 1983 in a scientific publication and a series of patents. The high-throughput technology behind the protein microarray was relatively easy to develop since it is based on the technology developed for DNA microarrays, which have become the most widely used microarrays.

<span class="mw-page-title-main">Ligand (biochemistry)</span> Substance that forms a complex with a biomolecule

In biochemistry and pharmacology, a ligand is a substance that forms a complex with a biomolecule to serve a biological purpose. The etymology stems from Latin ligare, which means 'to bind'. In protein-ligand binding, the ligand is usually a molecule which produces a signal by binding to a site on a target protein. The binding typically results in a change of conformational isomerism (conformation) of the target protein. In DNA-ligand binding studies, the ligand can be a small molecule, ion, or protein which binds to the DNA double helix. The relationship between ligand and binding partner is a function of charge, hydrophobicity, and molecular structure.

Surface-enhanced laser desorption/ionization (SELDI) is a soft ionization method in mass spectrometry (MS) used for the analysis of protein mixtures. It is a variation of matrix-assisted laser desorption/ionization (MALDI). In MALDI, the sample is mixed with a matrix material and applied to a metal plate before irradiation by a laser, whereas in SELDI, proteins of interest in a sample become bound to a surface before MS analysis. The sample surface is a key component in the purification, desorption, and ionization of the sample. SELDI is typically used with time-of-flight (TOF) mass spectrometers and is used to detect proteins in tissue samples, blood, urine, or other clinical samples, however, SELDI technology can potentially be used in any application by simply modifying the sample surface.

Phosphoproteomics is a branch of proteomics that identifies, catalogs, and characterizes proteins containing a phosphate group as a posttranslational modification. Phosphorylation is a key reversible modification that regulates protein function, subcellular localization, complex formation, degradation of proteins and therefore cell signaling networks. With all of these modification results, it is estimated that between 30–65% of all proteins may be phosphorylated, some multiple times. Based on statistical estimates from many datasets, 230,000, 156,000 and 40,000 phosphorylation sites should exist in human, mouse, and yeast, respectively.

<span class="mw-page-title-main">Activity-based proteomics</span> Analytical technique to study proteins

Activity-based proteomics, or activity-based protein profiling (ABPP) is a functional proteomic technology that uses chemical probes that react with mechanistically related classes of enzymes.

<span class="mw-page-title-main">Meir Wilchek</span> Israeli biochemist (born 1935)

Meir Wilchek is an Israeli biochemist. He is a professor at the Weizmann Institute of Science.

<span class="mw-page-title-main">Quantitative proteomics</span> Analytical chemistry technique

Quantitative proteomics is an analytical chemistry technique for determining the amount of proteins in a sample. The methods for protein identification are identical to those used in general proteomics, but include quantification as an additional dimension. Rather than just providing lists of proteins identified in a certain sample, quantitative proteomics yields information about the physiological differences between two biological samples. For example, this approach can be used to compare samples from healthy and diseased patients. Quantitative proteomics is mainly performed by two-dimensional gel electrophoresis (2-DE), preparative native PAGE, or mass spectrometry (MS). However, a recent developed method of quantitative dot blot (QDB) analysis is able to measure both the absolute and relative quantity of an individual proteins in the sample in high throughput format, thus open a new direction for proteomic research. In contrast to 2-DE, which requires MS for the downstream protein identification, MS technology can identify and quantify the changes.

<span class="mw-page-title-main">Affinity electrophoresis</span>

Affinity electrophoresis is a general name for many analytical methods used in biochemistry and biotechnology. Both qualitative and quantitative information may be obtained through affinity electrophoresis. Cross electrophoresis, the first affinity electrophoresis method, was created by Nakamura et al. Enzyme-substrate complexes have been detected using cross electrophoresis. The methods include the so-called electrophoretic mobility shift assay, charge shift electrophoresis and affinity capillary electrophoresis. The methods are based on changes in the electrophoretic pattern of molecules through biospecific interaction or complex formation. The interaction or binding of a molecule, charged or uncharged, will normally change the electrophoretic properties of a molecule. Membrane proteins may be identified by a shift in mobility induced by a charged detergent. Nucleic acids or nucleic acid fragments may be characterized by their affinity to other molecules. The methods have been used for estimation of binding constants, as for instance in lectin affinity electrophoresis or characterization of molecules with specific features like glycan content or ligand binding. For enzymes and other ligand-binding proteins, one-dimensional electrophoresis similar to counter electrophoresis or to "rocket immunoelectrophoresis", affinity electrophoresis may be used as an alternative quantification of the protein. Some of the methods are similar to affinity chromatography by use of immobilized ligands.

Bioanalysis is a sub-discipline of analytical chemistry covering the quantitative measurement of xenobiotics and biotics in biological systems.

<span class="mw-page-title-main">Disuccinimidyl suberate</span> Chemical compound

Disuccinimidyl suberate (DSS) is a six-carbon lysine-reactive non-cleavable cross-linking agent.

There are many methods to investigate protein–protein interactions which are the physical contacts of high specificity established between two or more protein molecules involving electrostatic forces and hydrophobic effects. Each of the approaches has its own strengths and weaknesses, especially with regard to the sensitivity and specificity of the method. A high sensitivity means that many of the interactions that occur are detected by the screen. A high specificity indicates that most of the interactions detected by the screen are occurring in reality.

<span class="mw-page-title-main">Surface-assisted laser desorption/ionization</span>

Surface-assisted laser desorption/ionization (SALDI) is a soft laser desorption technique used for mass spectrometry analysis of biomolecules, polymers, and small organic molecules. In its first embodiment Koichi Tanaka used a cobalt/glycerol liquid matrix and subsequent applications included a graphite/glycerol liquid matrix as well as a solid surface of porous silicon. The porous silicon represents the first matrix-free SALDI surface analysis allowing for facile detection of intact molecular ions, these porous silicon surfaces also facilitated the analysis of small molecules at the yoctomole level. At present laser desorption/ionization methods using other inorganic matrices such as nanomaterials are often regarded as SALDI variants. As an example, silicon nanowires as well as Titania nanotube arrays (NTA) have been used as substrates to detect small molecules. SALDI is used to detect proteins and protein-protein complexes. A related method named "ambient SALDI" - which is a combination of conventional SALDI with ambient mass spectrometry incorporating the direct analysis real time (DART) ion source has also been demonstrated. SALDI is considered one of the most important techniques in MS and has many applications.

Mass spectrometric immunoassay (MSIA) is a rapid method is used to detect and/ or quantify antigens and or antibody analytes. This method uses an analyte affinity isolation to extract targeted molecules and internal standards from biological fluid in preparation for matrix assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF-MS). This method allows for "top down" and "bottom up" analysis. This sensitive method allows for a new and improved process for detecting multiple antigens and antibodies in a single assay. This assay is also capable of distinguishing mass shifted forms of the same molecule via a panantibody, as well as distinguish point mutations in proteins. Each specific form is detected uniquely based on their characteristic molecular mass. MSIA has dual specificity because of the antibody-antigen reaction coupled with the power of a mass spectrometer.

A thermal shift assay (TSA) measures changes in the thermal denaturation temperature and hence stability of a protein under varying conditions such as variations in drug concentration, buffer pH or ionic strength, redox potential, or sequence mutation. The most common method for measuring protein thermal shifts is differential scanning fluorimetry (DSF) or thermofluor, which utilizes specialized fluorogenic dyes.

<span class="mw-page-title-main">Degradomics</span> Sub-discipline of biology

Degradomics is a sub-discipline of biology encompassing all the genomic and proteomic approaches devoted to the study of proteases, their inhibitors, and their substrates on a system-wide scale. This includes the analysis of the protease and protease-substrate repertoires, also called "protease degradomes". The scope of these degradomes can range from cell, tissue, and organism-wide scales.

Stable isotope standards and capture by anti-peptide antibodies (SISCAPA) is a mass spectrometry method for measuring the amount of a protein in a biological sample.

References

  1. Wang, Lei (2020-08-21). "Chemical Tools and Mass Spectrometry-based Approaches for Exploring Reactivity and Selectivity of Small Molecules in Complex Proteomes". Doctoral Dissertations.
  2. 1 2 Conway LP, Li W, Parker CG (March 2021). "Chemoproteomic-enabled phenotypic screening". Cell Chemical Biology. 28 (3): 371–393. doi: 10.1016/j.chembiol.2021.01.012 . PMID   33577749. S2CID   231910437.
  3. 1 2 3 4 5 Moellering RE, Cravatt BF (January 2012). "How chemoproteomics can enable drug discovery and development". Chemistry & Biology. 19 (1): 11–22. doi:10.1016/j.chembiol.2012.01.001. PMC   3312051 . PMID   22284350.
  4. Dowden H, Munro J (July 2019). "Trends in clinical success rates and therapeutic focus". Nature Reviews. Drug Discovery. 18 (7): 495–496. doi:10.1038/d41573-019-00074-z. PMID   31267067. S2CID   164564888.
  5. 1 2 3 4 5 Yao, Xudong, ed. (2021). Advances in Chemical Proteomics (1st ed.). Elsevier. doi:10.1016/C2019-0-03583-2. ISBN   978-0-12-821433-6. S2CID   243825970.
  6. 1 2 Nomura DK, Dix MM, Cravatt BF (September 2010). "Activity-based protein profiling for biochemical pathway discovery in cancer". Nature Reviews. Cancer. 10 (9): 630–638. doi:10.1038/nrc2901. PMC   3021511 . PMID   20703252.
  7. 1 2 3 4 5 6 7 Geoghegan KF, Johnson DS (2010). "Chemical Proteomic Technologies for Drug Target Identification". Annual Reports in Medicinal Chemistry. 45. Elsevier: 345–360. doi:10.1016/s0065-7743(10)45021-6. ISBN   9780123809025.
  8. 1 2 3 Wang S, Tian Y, Wang M, Wang M, Sun GB, Sun XB (2018-04-09). "Advanced Activity-Based Protein Profiling Application Strategies for Drug Development". Frontiers in Pharmacology. 9: 353. doi: 10.3389/fphar.2018.00353 . PMC   5900428 . PMID   29686618.
  9. 1 2 3 4 5 Smith E, Collins I (February 2015). "Photoaffinity labeling in target- and binding-site identification". Future Medicinal Chemistry. 7 (2): 159–183. doi:10.4155/fmc.14.152. PMC   4413435 . PMID   25686004.
  10. 1 2 3 Chen X, Wang Y, Ma N, Tian J, Shao Y, Zhu B, et al. (May 2020). "Target identification of natural medicine with chemical proteomics approach: probe synthesis, target fishing and protein identification". Signal Transduction and Targeted Therapy. 5 (1): 72. doi:10.1038/s41392-020-0186-y. PMC   7239890 . PMID   32435053.
  11. Hou X, Sun M, Bao T, Xie X, Wei F, Wang S (October 2020). "Recent advances in screening active components from natural products based on bioaffinity techniques". Acta Pharmaceutica Sinica B. 10 (10): 1800–1813. doi:10.1016/j.apsb.2020.04.016. PMC   7606101 . PMID   33163336.
  12. 1 2 Zhuo R, Liu H, Liu N, Wang Y (November 2016). "Ligand Fishing: A Remarkable Strategy for Discovering Bioactive Compounds from Complex Mixture of Natural Products". Molecules. 21 (11): 1516. doi: 10.3390/molecules21111516 . PMC   6274472 . PMID   27845727.
  13. Turkov J (1978). Affinity Chromatography. Elsevier. ISBN   978-0-08-085812-8. OCLC   476215351.
  14. 1 2 Rodriguez EL, Poddar S, Iftekhar S, Suh K, Woolfork AG, Ovbude S, et al. (November 2020). "Affinity chromatography: A review of trends and developments over the past 50 years". Journal of Chromatography. B, Analytical Technologies in the Biomedical and Life Sciences. 1157: 122332. doi:10.1016/j.jchromb.2020.122332. PMC   7584770 . PMID   32871378.
  15. 1 2 Ha J, Park H, Park J, Park SB (March 2021). "Recent advances in identifying protein targets in drug discovery". Cell Chemical Biology. 28 (3): 394–423. doi: 10.1016/j.chembiol.2020.12.001 . PMID   33357463. S2CID   229693161.
  16. 1 2 Lomenick B, Olsen RW, Huang J (January 2011). "Identification of direct protein targets of small molecules". ACS Chemical Biology. 6 (1): 34–46. doi:10.1021/cb100294v. PMC   3031183 . PMID   21077692.
  17. Mateus A, Kurzawa N, Becher I, Sridharan S, Helm D, Stein F, et al. (March 2020). "Thermal proteome profiling for interrogating protein interactions". Molecular Systems Biology. 16 (3): e9232. doi:10.15252/msb.20199232. PMC   7057112 . PMID   32133759.
  18. 1 2 Lomenick B, Hao R, Jonai N, Chin RM, Aghajan M, Warburton S, et al. (December 2009). "Target identification using drug affinity responsive target stability (DARTS)". Proceedings of the National Academy of Sciences of the United States of America. 106 (51): 21984–21989. Bibcode:2009PNAS..10621984L. doi: 10.1073/pnas.0910040106 . PMC   2789755 . PMID   19995983.
  19. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Annis DA, Nickbarg E, Yang X, Ziebell MR, Whitehurst CE (October 2007). "Affinity selection-mass spectrometry screening techniques for small molecule drug discovery". Current Opinion in Chemical Biology. 11 (5): 518–526. doi:10.1016/j.cbpa.2007.07.011. PMID   17931956.
  20. 1 2 3 4 5 6 7 8 9 10 Prudent R, Annis DA, Dandliker PJ, Ortholand JY, Roche D (2020-10-21). "Exploring new targets and chemical space with affinity selection-mass spectrometry". Nature Reviews Chemistry. 5 (1): 62–71. doi:10.1038/s41570-020-00229-2. PMID   37118102. S2CID   224811862.
  21. 1 2 Zehender H, Le Goff F, Lehmann N, Filipuzzi I, Mayr LM (September 2004). "SpeedScreen: The "missing link" between genomics and lead discovery". Journal of Biomolecular Screening. 9 (6): 498–505. doi: 10.1177/1087057104267605 . PMID   15452336. S2CID   7135803.
  22. 1 2 Chan JN, Vuckovic D, Sleno L, Olsen JB, Pogoutse O, Havugimana P, et al. (July 2012). "Target identification by chromatographic co-elution: monitoring of drug-protein interactions without immobilization or chemical derivatization". Molecular & Cellular Proteomics. 11 (7): M111.016642. doi: 10.1074/mcp.M111.016642 . PMC   3394955 . PMID   22357554.
  23. Meng XY, Zhang HX, Mezei M, Cui M (June 2011). "Molecular docking: a powerful approach for structure-based drug discovery". Current Computer-Aided Drug Design. 7 (2): 146–157. doi:10.2174/157340911795677602. PMC   3151162 . PMID   21534921.
  24. 1 2 3 Yang SY (June 2010). "Pharmacophore modeling and applications in drug discovery: challenges and recent advances". Drug Discovery Today. 15 (11–12): 444–450. doi:10.1016/j.drudis.2010.03.013. PMID   20362693. S2CID   12843569.
  25. Khedkar SA, Malde AK, Coutinho EC, Srivastava S (March 2007). "Pharmacophore modeling in drug discovery and development: an overview". Medicinal Chemistry. 3 (2): 187–197. doi:10.2174/157340607780059521. PMID   17348856.
  26. 1 2 3 4 Spradlin JN, Zhang E, Nomura DK (April 2021). "Reimagining Druggability Using Chemoproteomic Platforms". Accounts of Chemical Research. 54 (7): 1801–1813. doi:10.1021/acs.accounts.1c00065. PMID   33733731. S2CID   232303398.
  27. 1 2 3 4 Haas P, Muralidharan M, Krogan NJ, Kaake RM, Hüttenhain R (February 2021). "Proteomic Approaches to Study SARS-CoV-2 Biology and COVID-19 Pathology". Journal of Proteome Research. 20 (2): 1133–1152. doi:10.1021/acs.jproteome.0c00764. PMC   7839417 . PMID   33464917.
  28. Deng H, Lei Q, Wu Y, He Y, Li W (April 2020). "Activity-based protein profiling: Recent advances in medicinal chemistry". European Journal of Medicinal Chemistry. 191: 112151. doi:10.1016/j.ejmech.2020.112151. PMID   32109778. S2CID   211564093.
  29. Knockaert M, Gray N, Damiens E, Chang YT, Grellier P, Grant K, et al. (June 2000). "Intracellular targets of cyclin-dependent kinase inhibitors: identification by affinity chromatography using immobilised inhibitors". Chemistry & Biology. 7 (6): 411–422. doi: 10.1016/s1074-5521(00)00124-1 . PMID   10873834.