2-12-0

Last updated
A Wurttemberg K locomotive, an example of this wheel arrangement. Wurttemberg K.jpg
A Württemberg K locomotive, an example of this wheel arrangement.

Under the Whyte notation for the classification of steam locomotives, 2-12-0 represents the wheel arrangement of two leading wheels on one axle (usually in a leading truck), twelve powered and coupled driving wheels on six axles, and no trailing wheels.

Contents

Equivalent classifications

Other equivalent classifications are:

Germany

While standard German freight train steam locomotives were 2-10-0 types, between 1917 and 1924 the Esslingen locomotive works produced 44 units of the so-called Class K for the Royal Württemberg State Railways (later renumbered to class 59 by the Deutsche Reichsbahn). With a top speed of only 60 km/h these locomotives were designed for heavy duty in mountainous areas such as the Geislinger Steige, with special attention on low load per axle (16 t). During World War II, after electrification of that line the units were used on the Semmering railway in Austria, then part of the German Reich. [1] The last four units were in service until 1957.

France

The Paris-Orleans railway made a compound demonstrator (160-A1) under the orders of André Chapelon which used a six-cylinder, double expansión configuration with 'resuperheat'.

Other

Other 2-12-0s were built for the Austrian State Railways in 1912. [2]

Related Research Articles

<span class="mw-page-title-main">Whyte notation</span> Code for arrangement of locomotive wheels

The Whyte notation is a classification method for steam locomotives, and some internal combustion locomotives and electric locomotives, by wheel arrangement. It was devised by Frederick Methvan Whyte, and came into use in the early twentieth century following a December 1900 editorial in American Engineer and Railroad Journal.

<span class="mw-page-title-main">0-6-0</span> Locomotive wheel arrangement

0-6-0 is the Whyte notation designation for steam locomotives with a wheel arrangement of no leading wheels, six powered and coupled driving wheels on three axles, and no trailing wheels. Historically, this was the most common wheel arrangement used on both tender and tank locomotives in versions with both inside and outside cylinders.

Under the Whyte notation for the classification of steam locomotives, 2-10-0 represents the wheel arrangement of two leading wheels on one axle, ten powered and coupled driving wheels on five axles, and no trailing wheels. This arrangement was often named Decapod, especially in the United States, although this name was sometimes applied to locomotives of 0-10-0 "Ten-Coupled" arrangement, particularly in the United Kingdom. Notable German locomotives of this type include the war locomotives of Class 52.

The UIC classification of locomotive axle arrangements, sometimes known as the German classification or German system, describes the wheel arrangement of locomotives, multiple units and trams. It is used in much of the world, notable exceptions being the United Kingdom, which uses a slightly simplified form of UIC, and in North America, where the AAR wheel arrangement system is used to describe diesel and electric locomotives. In North America, the Whyte notation is only used for steam locomotives.

<span class="mw-page-title-main">2-6-0</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 2-6-0 represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, six powered and coupled driving wheels on three axles and no trailing wheels. This arrangement is commonly called a Mogul.

<span class="mw-page-title-main">2-2-0</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 2-2-0 represents the wheel arrangement of two leading wheels on one axle, two powered driving wheels on one axle, and no trailing wheels. This configuration, which became very popular during the 1830s, was commonly called the Planet type after the first locomotive, Robert Stephenson's Planet of 1830.

<span class="mw-page-title-main">2-8-2</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 2-8-2 represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, eight powered and coupled driving wheels on four axles and two trailing wheels on one axle, usually in a trailing truck. This configuration of steam locomotive is most often referred to as a Mikado, frequently shortened to Mike.

<span class="mw-page-title-main">2-8-4</span> Locomotive wheel arrangement

Under the Whyte notation, a 2-8-4 is a steam locomotive that has two unpowered leading wheels, followed by eight coupled and powered driving wheels, and four trailing wheels. This locomotive type is most often referred to as a Berkshire, though the Chesapeake and Ohio Railway used the name Kanawha for their 2-8-4s. In Europe, this wheel arrangement was mostly seen in mainline passenger express locomotives and, in certain countries, in tank locomotives.

<span class="mw-page-title-main">0-10-0</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 0-10-0 represents the wheel arrangement of no leading wheels, ten powered and coupled driving wheels on five axles and no trailing wheels. In the United Kingdom, this type is known as a Decapod, a name which is applied to 2-10-0 types in the United States. In the United States, the type is known as ten-coupled.

<span class="mw-page-title-main">4-2-2</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 4-2-2 represents the wheel arrangement of four leading wheels on two axles, two powered driving wheels on one axle, and two trailing wheels on one axle.

<span class="mw-page-title-main">2-6-4</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, a 2-6-4 locomotive has two leading wheels, six coupled driving wheels and four trailing wheels.

<span class="mw-page-title-main">2-2-2</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 2-2-2 represents the wheel arrangement of two leading wheels on one axle, two powered driving wheels on one axle, and two trailing wheels on one axle. The wheel arrangement both provided more stability and enabled a larger firebox than the earlier 0-2-2 and 2-2-0 types. This wheel arrangement is sometimes described as a Single, although this name could be used to describe any kind of locomotive with a single pair of driving wheels.

Under the Whyte notation for the classification of steam locomotives, 0-8-0 represents the wheel arrangement of no leading wheels, eight powered and coupled driving wheels on four axles and no trailing wheels. Locomotives of this type are also referred to as eight coupled.

Under the Whyte notation for the classification of steam locomotives, 0-8-2 represents the wheel arrangement of no leading wheels, eight powered and coupled driving wheels on four axles, and two trailing wheels on one axle.

<span class="mw-page-title-main">0-4-4T</span> Tank locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 0-4-4 represents the wheel arrangement of no leading wheels, four powered and coupled driving wheels on two axles, and four trailing wheels on two axles. This type was only used for tank locomotives.

Under the Whyte notation for the classification of steam locomotives, 0-12-0 represents the wheel arrangement of no leading wheels, twelve powered and coupled driving wheels on six axles, and no trailing wheels.

Under the Whyte notation for the classification of steam locomotives, 2-12-2 represents the wheel arrangement of two leading wheels on one axle, twelve powered and coupled driving wheels on six axles, and two trailing wheels on one axle.

<span class="mw-page-title-main">2-6-8-0</span> Articulated locomotive wheel arrangement

A 2-6-8-0 steam locomotive, in the Whyte notation for describing locomotive wheel arrangements, has two leading wheels, a set of six driving wheels, a set of eight driving wheels, and no trailing wheels. These locomotives usually employ the Mallet principle of articulation, with a swinging front engine and a rigidly attached rear engine.

<span class="mw-page-title-main">4-6-2+2-6-4</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives by wheel arrangement, a 4-6-2+2-6-4 is a Garratt or Union Garratt articulated locomotive using a pair of 4-6-2 engine units back to back, with the boiler and cab suspended between them. The 4-6-2 wheel arrangement of each engine unit has four leading wheels on two axles, usually in a leading bogie, six powered and coupled driving wheels on three axles, and two trailing wheels on one axle, usually in a trailing truck.

<span class="mw-page-title-main">Leading wheel</span> Unpowered wheel at the front of a locomotive

The leading wheel or leading axle or pilot wheel of a steam locomotive is an unpowered wheel or axle located in front of the driving wheels. The axle or axles of the leading wheels are normally located on a leading truck. Leading wheels are used to help the locomotive negotiate curves and to support the front portion of the boiler.

References

  1. Wallis, P. Ransome (1976). Last Steam locomotives of Western Europe. Internet Archive. [S.l.] : an Allan. p. 7. ISBN   978-0-7110-0637-9.
  2. 0-12-0 Type Locomotives for Bulgarian State Rys. Railway Review. 1923. p. 127.