The 2015 Oxnard train derailment occurred on February 24, 2015, at 5:44 a.m. local time when a Metrolink passenger train collided with a truck that a driver had mistakenly turned from Rice Avenue onto the tracks and became stuck. After the impact, the train derailed at Oxnard, California, United States. As a result of the crash, the train engineer died from his injuries a week later and 32 passengers and crew members were injured. The truck driver exited his vehicle and ran from the scene prior to the crash; he sustained minor injuries that were unrelated to the crash sequence.
The accident happened along the Coast Line owned by the Union Pacific Railroad (UP). This portion of the railroad runs parallel with East Fifth Street (designated California State Route 34) between Camarillo and Oxnard. Besides Metrolink, the rail line is used by Amtrak passenger trains and UP freight trains. An average of eight passenger and 24 freight trains use the line in each direction each day.[1][2] At the Rice Avenue at-grade crossing, where this collision occurred, emergency crews had previously pulled vehicles off the tracks about 18 times.[3] A bridge to allow Rice Avenue to pass over the tracks had been planned for almost two decades, however, funding remained unavailable in Ventura County for the estimated $35 million grade separation project.[4]
The truck driver, 54-year-old Jose Alejandro Sanchez-Ramirez, who was unfamiliar with the area and was “acutely fatigued” at the time of the incident, intended to turn right onto East Fifth Street from South Rice Avenue but mistakenly turned onto the UP tracks and the truck became lodged on the track about 80 feet (24m) west of the grade crossing. The driver attempted to push the truck off the track. He also stated that he tried to call 911 but was in a state of panic and could not do so. At some point before the arrival of the train, he exited the truck, leaving the headlights and hazard lights on and the driver door open. Based on an analysis of GPS data obtained from the driver’s cell phone, about 12 minutes elapsed between the time the truck became lodged on the tracks and the collision with the train.[5]
The train was led by a Hyundai Rotem cab/coach car #645 (a nonpowered coach car with a compartment from which the engineer can control the train), followed by Bombardier BiLevel coach car #206, Hyundai Rotem coach cars 211 and 263, and EMD F59PHdiesel-electric locomotive #870 at the rear. It was occupied by three crew members (an engineer, a student engineer, and a conductor) and 51 passengers. The train was traveling from East Ventura to Los Angeles. It was accelerating after leaving the Oxnard station2 miles (3.2km) away from the crash site.[6] Passenger trains are permitted to travel at up to 79 miles per hour (127km/h) on the section of track where the crash occurred.[7] Before the accident, the train was traveling at 64 miles per hour (103km/h) when the emergency brakes were applied[8] and had slowed to 56 miles per hour (90km/h) when it hit the truck.[8]
NTSB investigator examines truck involved in the crash
After striking the truck and trailer, the train continued through the grade crossing, where all four-passenger cars subsequently derailed, and three rolled over on their sides. The locomotive did not derail.[9][1] The truck was pushed along the track and came to rest about 130 feet (40m) east of the grade crossing on the south side of the track bed. The trailer detached from the truck and came to rest on the grade crossing, where a postcrash fire consumed it. Debris from the collision caused minor damage to a 1998 Toyota Camry, which was stopped at the grade crossing, facing north, at the time of the crash.
NTSB Board Member Robert Sumwalt briefs media in February 2015
The National Transportation Safety Board (NTSB) launched an investigation into the accident, and a go-team was dispatched to the scene.[11][12] The train was fitted with a forward-facing camera in the cab/coach car and the camera recorded the collision itself.[9][13]
The NTSB determined that the probable cause of the crash was the truck driver mistakenly turning onto the railroad right-of-way due to acute fatigue and unfamiliarity with the area.[5] The NTSB investigation found that the crash occurred nearly 24 hours after the truck driver, Sanchez-Ramirez, reported for duty in Somerton, Arizona and 16.75 hours after he began the trip to Oxnard, well above the limits set for commercial drivers. The truck driver worked for The Growers Company but operated a vehicle owned by Harvest Management. The two companies share the same ownership and manage a farming operation. After having been off duty the day before, the driver went on duty at 5:51 a.m. on February 23. At 1:00 p.m., his employer dispatched Sanchez-Ramirez from their base in Somerton to Oxnard, a 6-hour trip. However, Sanchez-Ramirez experienced a 4.5-hour delay in Jacumba, California due to a damaged radiator, which necessitated that he obtain a replacement truck. Additionally, his truck was sideswiped by another vehicle in Los Angeles, which further extended his travel time.
The cab/coach car and two of the three coach cars were fitted with a crash energy management (CEM) system designed to dissipate kinetic energy during a collision. The cars had been purchased as part of the response to Metrolink's deadly 2005 Glendale train crash and 2008 Chatsworth train collision.[14] The NTSB investigation determined that the CEM elements (colloquially known as "crumple zones") were not activated in the collision. The investigation further determined that welds on the train's pilot assembly (colloquially known as a "snowplow" or "cowcatcher") failed and detached from the lead cab car during the crash sequence; however, no markings or damage suggested that the pilot assembly itself interfered with the wheels of the train and caused the derailment. The railcar interiors exhibited no loss of occupant survival space, and analysis determined the primary cause of injury was determined to be the overturning of the railcars and subsequent passenger and crew impacts with hard interior surfaces.[5][15]
Aftermath
BNSF AC4400CW 5696 pulling Metrolink in the aftermath of the derailment
Immediately following the derailment, service was suspended through the accident site, and Metrolink passengers were bussed between Camarillo, Oxnard, and East Ventura stations.[16]AmtrakPacific Surfliner and service between Los Angeles and Goleta, that uses the same tracks, was canceled.[17] Local roads around the scene of the accident were closed.[6]
Service along the rail line was restored by Wednesday afternoon, with the first passenger train passing through the crash site at about 5:40p.m.[16]
The train engineer, Glenn Steele, 62, was critically injured and died one week later.[18][19] Steele was employed by Amtrak, which provides train crews to Metrolink under contract, and at the time of his death, was the most senior engineer with Metrolink, having spent half of his 42-year-long Amtrak career with Metrolink.[20][21][22] Steele died at Cedars-Sinai Medical Center early on March 3.[23] A resident of Homeland, California, Steele was a grandfather.[21]
The truck driver, Jose Alejandro Sanchez-Ramirez, 54 left the scene on foot following the accident but was later taken into custody about a mile away. According to his attorney, the man was trying to summon help in a remote part of the county without a vehicle and with no guarantee anyone he found would be able to communicate with him since he only speaks Spanish.[1] When he finally encountered police officers, he handed them the cell phone on which he had been talking to his son so that his son could explain to the officers what had just happened to the train.[24] He was booked on suspicion of hit and run and held on $150,000 bail, but prosecutors later declined to file criminal charges against him and he was released two days later.[25][26] On February 22, 2016, Sanchez-Ramirez was charged with a misdemeanor vehicular manslaughter charge by Ventura County prosecutors.[27] He pleaded guilty to the charge on April 25, 2019 and was sentenced on July 24 to spend 30 days in jail.[28][3]
In March 2015, two of those injured due to the crash sued the truck driver, and his employer, Harvest Management LLC.[29]
Metrolink announced on September 3, 2015, that they would restrict the use of the cab cars for at least a year as they reviewed the safety features. As a stopgap, BNSF Railway locomotives were borrowed to add a second locomotive to each train set, positioned in front of the cab car.[30][31] Metrolink determined that all of the pilot assemblies on the Hyundai–Rotem cab car had not been securely attached, and on July 8, 2016, the Metrolink board approved a $1.5 million plan to repair the pilots.[32] Metrolink sued the manufacturer a few months later, alleging faulty parts and a breach of contract and warranty.[33] Once the repairs were completed, the cars returned to service and the leased BNSF locomotives were returned.
Metrolink is a commuter rail system in Southern California, serving Los Angeles, Orange, Riverside, San Bernardino, and Ventura counties, as well as to Oceanside in San Diego County. The system consists of eight lines and 69 stations operating on 545.6 miles (878.1 km) of track. This includes Arrow, which Metrolink operates under a contract with the San Bernardino County Transportation Authority (SBCTA).
The Metrolink Ventura County Line is a commuter rail line serving Ventura County and the San Fernando Valley in Los Angeles County and the City of Los Angeles, in the Southern California system. The line is the successor of the short lived CalTrain commuter rail line.
Metrolink's Riverside Line is a commuter rail line running from L.A. Union Station in Downtown Los Angeles to Riverside along the Union Pacific Railroad. It runs weekday peak commuter hours only, with very little midday and reverse commute service. In 2011, the average weekday ridership was 5,161 passengers.
The 2005 Glendale train crash occurred on January 26, 2005, at 6:03 a.m. PST, when a Metrolink commuter train collided with a sport utility vehicle that had been parked on the tracks by a suicidal man in an industrial area of Glendale, California, just east of the Los Angeles city limits, causing the deaths of 11 people and injuring 177 more. The driver of the car, who had changed his mind shortly before the impact but willingly left his car on the tracks, survived the incident and was charged with eleven counts of murder and one count of arson.
On March 15, 1999, Amtrak's southbound City of New Orleans passenger train collided with a semi-trailer truck in the village of Bourbonnais, Illinois, United States. Most of the train derailed, killing eleven people. A National Transportation Safety Board (NTSB) investigation into the accident attributed the cause to the truck driver trying to beat the train across a grade crossing. The NTSB's recommendations from the accident included increased enforcement of grade crossing signals, the installation of train event recorders at all new or improved grade crossings, and procedures to provide emergency responders with accurate lists of all crew members and passengers aboard trains. The city of Bourbonnais erected a memorial near the site to commemorate those killed in the accident.
Positive train control (PTC) is a family of automatic train protection systems deployed in the United States. Most of the United States' national rail network mileage has a form of PTC. These systems are generally designed to check that trains are moving safely and to stop them when they are not.
The 2008 Chatsworth train collision occurred at 4:22:23 p.m. PDT on September 12, 2008, when a Union Pacific Railroad freight train and a Metrolink commuter rail passenger train collided head-on in the Chatsworth neighborhood of Los Angeles, California, United States.
On the evening of February 3, 2015, a commuter train on Metro-North Railroad's Harlem Line struck a passenger car at a grade crossing on Commerce Street near Valhalla, New York, United States, between the Valhalla and Mount Pleasant stations, killing six people and injuring 15 others, seven very seriously. It is the deadliest crash in Metro-North's history, and at the time the deadliest rail accident in the United States since the June 2009 Washington Metro train collision, which killed nine passengers and injured 80.
On March 9, 2015, an Amtrak passenger train derailed in Halifax, North Carolina, after colliding with a truck carrying an oversize load that was obstructing the line at a grade crossing. There were no fatalities, but 55 people were injured.
The Crozet, Virginia train crash was a railway accident that occurred on January 31, 2018. A chartered Amtrak train named Congressional Special Train 923, following the route normally used by the Amtrak Cardinal and carrying a group of politicians and lawmakers from the Republican Party, collided with a garbage truck at a level crossing at Lanetown Road in Crozet, Virginia, 12 miles (19 km) west of Charlottesville, Virginia. The train was chartered by Republican lawmakers for transportation from Washington Union Station to an annual retreat at The Greenbrier in White Sulphur Springs, West Virginia. Several politicians brought their spouses and children with them for the trip; no members of the general public were passengers.
Metrolink, the commuter rail system serving Southern California, operates a fleet of passenger train rolling stock consisting of 60 locomotives, 137 active Bombardier BiLevel Coaches, and 137 Rotem Commuter Cars. Operation of the weekday train schedule requires 36 locomotives to be operational.
On June 27, 2022, the Southwest Chief, a passenger train operated by Amtrak, derailed near the small town of Mendon, Missouri. The derailment was caused by the train striking a dump truck that was obstructing the crossing of County Road 113, about three miles (4.8 km) southwest of Mendon. Four people were killed in the wreck: three passengers on board the train and the truck driver, with up to 150 people injured.
The 2002 Placentia train collision occurred at around 8:10 am. PDT on April 23, 2002, when a BNSF Railway freight train and a Metrolink commuter train collided head-on at Control Point Atwood in Placentia, California, United States.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
