Adaptive voltage scaling

Last updated

Adaptive voltage scaling (AVS) is a closed-loop dynamic power minimization technique that adjusts the voltage supplied to a computer chip to match the chip's power needs during operation. Many computer chips, especially those in mobile devices or Internet of things devices are constrained by the power available (for example, they are limited to the power stored in a battery) and face varying workloads. [1] In other situations a chip may be constrained by the amount of heat it is allowed to generate. In addition, individual chips can vary in their efficiency due to many factors, including minor differences in manufacturing conditions. [2] AVS allows the voltage supplied to the chip, and therefore its power consumption, to be continuously adjusted to be appropriate to the workload and the parameters of the specific chip. This is accomplished by integrating a device that monitors the performance of the chip (a hardware performance manager) into the chip, which then provides information to a power controller. [3]

Contents

AVS is similar in its goal to dynamic voltage scaling (DVS) and dynamic voltage and frequency scaling (DVFS). All three approaches aim to reduce power usage and heat generation. [4] However AVS adapts the voltage directly to the conditions on the chip, [5] allowing it to address real-time power requirements as well as chip-to-chip variations and changes in performance that occur as the chip ages.

Dynamic Approaches to reduce power in digital circuits Dynamic power Management techniques.jpg
Dynamic Approaches to reduce power in digital circuits

Background

Technological advances have enabled very powerful and versatile computing systems to be implemented on smaller chips. As this allows a larger number of functions to take place in the same area, both current density and the associated power dissipation become more concentrated compared to larger chips. The power consumption and thermal performance of integrated circuits has become a limiting factor for high-performance systems. [6] [7] [8] Mobile devices are also limited by the total amount of power available. [5] Minimizing power consumption in digital CMOS circuits requires significant design effort at all levels. Supply voltage reduction is one way to achieve this, but static supply voltage reduction can reduce performance. Dynamic voltage scaling systems are used to adjust the supply voltage to the specific operations the chip is performing. However, conventional DVS systems do not directly monitor the performance of the chip and must therefore accommodate operation under worst-case performance scenarios. [5] AVS aims to supply each individual domain of the system on the chip with just enough voltage to perform its task under the conditions actually experienced by the chip, minimizing power consumption per processor domain. [4]

Advantages of AVS

Adaptive voltage scaling is a closed-loop DVS approach that evaluates different factors, such as process variations from device to device on a chip, temperature fluctuations during chip operations, and load variations, and establishes a voltage-frequency relationship for the circuit under those conditions. Each individual chip's process corner is determined either during manufacturing or during runtime and the optimal voltage-frequency relationship is determined and subsequently used for voltage optimization. The advantages offered by this approach are: [4]

Adaptive voltage scaling is used to address the energy-saving requirements of application-specific integrated circuits, microprocessors and system on a chip circuits. It is also well-suited for high-volume systems such as data centers and wireless base stations, as well as power-constrained applications such as portable devices, USB peripherals, and consumer electronics. [4]

Comparison between DVS and AVS

The primary difference between DVS and AVS is that the former has an open loop control architecture whereas the latter is closed-loop. That is, in AVS there is direct feedback between the performance of the chip and the voltage provided to it.

DVS

A generic DVS system has a performance manager, a phase-locked loop and a voltage regulator. [8] The performance manager uses a software interface to predict the performance requirements of the next task. Once the power requirements have been determined, the voltage and frequency are set by the performance manager. The phase-locked loop accomplishes the frequency scaling depending on the target frequency set by the performance manager. Similarly, the voltage regulator is programmed to scale the supply voltage in order to achieve the target voltage for the task. DVS systems use a one-to-one mapping of the voltage to frequency to perform the voltage scaling. Frequency-voltage pairs are determined by characterizing the chip's performance under worst-case conditions and stored in a lookup table. If conditions are more favorable, there may be a significant over-supply of power.

AVS

In closed-loop systems such as AVS, actual on-chip conditions are measured and used to determine the target voltage and frequency. [4] [8] Several different implementations of AVS have been developed.

Critical Path Emulation

Critical Path Monitoring Technique for Adaptive Voltage Scaling Critical path monitoring technique.jpg
Critical Path Monitoring Technique for Adaptive Voltage Scaling

One way to determine the voltage-frequency relationship of the chip is to use a critical path emulator. [8] The emulator is tuned during the manufacturing process to closely model the behavior of the chip, and adapts to environmental and process variations. Measuring the behavior of the emulator allows the supply voltage to be automatically adjusted such that the minimum voltage is supplied for the target task. [5]

A ring oscillator that operates at the same voltage as that of the rest of the chip can be used as a critical path emulator. The ring oscillator's measured frequency indicates the voltage-frequency relationship for the chip under the conditions in which it is operating.

Another type of emulator is a "delay chain" of inverters, NAND gates, wire segments, etc. The exact setting of the delay chain is determined during manufacturing after testing. The delay chain is then used to measure the time taken for a process to traverse the chain, simulating the performance of the chip. [8] [9] [10]

Both the ring oscillator and critical path methods suffer from the problem that they may not offer a perfect simulation of the operation of the chip, so that a safety margin must be included. [9]

Direct measurement of circuit behavior

An alternative to simulating the behavior of the critical path is to measure circuit performance directly. One implementation of this approach, called Razor, is based on the idea that only a subset of input patterns will activate the longest timing path on the chip. If the voltage is too low, these input patterns will create a timing error. However, chips have error-correction systems built into them, so a low number of errors can be tolerated. The number of errors is measured and used as feedback to the power system: if the number of errors is very low, then the voltage can be dropped to save power; if the number of errors is above a certain threshold, then the voltage must be increased. [5] [8] [11]

Over time, chips develop negative-bias temperature instability, which increases the voltage required to operate correctly. AVS can be used to mitigate this issue by increasing the voltage to match the new requirements of the system. This is possible only if the operational degradation due to temperature instability is accurately captured by the performance sensor in the AVS system. [10]

See also

Related Research Articles

Amplifier Electronic device/component that increases the strength of a signal

An amplifier, electronic amplifier or (informally) amp is an electronic device that can increase the power of a signal. It is a two-port electronic circuit that uses electric power from a power supply to increase the amplitude of a signal applied to its input terminals, producing a proportionally greater amplitude signal at its output. The amount of amplification provided by an amplifier is measured by its gain: the ratio of output voltage, current, or power to input. An amplifier is a circuit that has a power gain greater than one.

Analog-to-digital converter System that converts an analog signal into a digital signal

In electronics, an analog-to-digital converter is a system that converts an analog signal, such as a sound picked up by a microphone or light entering a digital camera, into a digital signal. An ADC may also provide an isolated measurement such as an electronic device that converts an analog input voltage or current to a digital number representing the magnitude of the voltage or current. Typically the digital output is a two's complement binary number that is proportional to the input, but there are other possibilities.

Embedded system Computer system with a dedicated function

An embedded system is a computer system—a combination of a computer processor, computer memory, and input/output peripheral devices—that has a dedicated function within a larger mechanical or electronic system. It is embedded as part of a complete device often including electrical or electronic hardware and mechanical parts. Because an embedded system typically controls physical operations of the machine that it is embedded within, it often has real-time computing constraints. Embedded systems control many devices in common use today. In 2009, it was estimated that ninety-eight percent of all microprocessors manufactured were used in embedded systems.

CMOS Technology for constructing integrated circuits

Complementary metal–oxide–semiconductor, also known as complementary-symmetry metal–oxide–semiconductor (COS-MOS), is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complementary and symmetrical pairs of p-type and n-type MOSFETs for logic functions. CMOS technology is used for constructing integrated circuit (IC) chips, including microprocessors, microcontrollers, memory chips, and other digital logic circuits. CMOS technology is also used for analog circuits such as image sensors, data converters, RF circuits, and highly integrated transceivers for many types of communication.

Overclocking Practice of increasing the clock rate of a computer to exceed that certified by the manufacturer

In computing, overclocking is the practice of increasing the clock rate of a computer to exceed that certified by the manufacturer. Commonly, operating voltage is also increased to maintain a component's operational stability at accelerated speeds. Semiconductor devices operated at higher frequencies and voltages increase power consumption and heat. An overclocked device may be unreliable or fail completely if the additional heat load is not removed or power delivery components cannot meet increased power demands. Many device warranties state that overclocking or over-specification voids any warranty, however there are an increasing number of manufacturers that will allow overclocking as long as performed (relatively) safely.

Processor power dissipation or processing unit power dissipation is the process in which computer processors consume electrical energy, and dissipate this energy in the form of heat due to the resistance in the electronic circuits.

Bipolar CMOS (BiCMOS) is a semiconductor technology that integrates two semiconductor technologies, those of the bipolar junction transistor and the CMOS gate, in a single integrated circuit device. In more recent times the bipolar processes have been extended to include high mobility devices using Silicon Germanium junctions.

In electronics, rapid single flux quantum (RSFQ) is a digital electronic device that uses superconducting devices, namely Josephson junctions, to process digital signals. In RSFQ logic, information is stored in the form of magnetic flux quanta and transferred in the form of Single Flux Quantum (SFQ) voltage pulses. RSFQ is one family of superconducting or SFQ logic. Others include Reciprocal Quantum Logic (RQL), ERSFQ – energy-efficient RSFQ version that does not use bias resistors, etc. Josephson junctions are the active elements for RSFQ electronics, just as transistors are the active elements for semiconductor electronics. RSFQ is a classical digital, not quantum computing, technology.

Charge pump

A charge pump is a kind of DC-to-DC converter that uses capacitors for energetic charge storage to raise or lower voltage. Charge-pump circuits are capable of high efficiencies, sometimes as high as 90–95%, while being electrically simple circuits.

Direct torque control (DTC) is one method used in variable-frequency drives to control the torque of three-phase AC electric motors. This involves calculating an estimate of the motor's magnetic flux and torque based on the measured voltage and current of the motor.

Dynamic frequency scaling is a power management technique in computer architecture whereby the frequency of a microprocessor can be automatically adjusted "on the fly" depending on the actual needs, to conserve power and reduce the amount of heat generated by the chip. Dynamic frequency scaling helps preserve battery on mobile devices and decrease cooling cost and noise on quiet computing settings, or can be useful as a security measure for overheated systems.

Dynamic voltage scaling is a power management technique in computer architecture, where the voltage used in a component is increased or decreased, depending upon circumstances. Dynamic voltage scaling to increase voltage is known as overvolting; dynamic voltage scaling to decrease voltage is known as undervolting. Undervolting is done in order to conserve power, particularly in laptops and other mobile devices, where energy comes from a battery and thus is limited, or in rare cases, to increase reliability. Overvolting is done in order to support higher frequencies for performance.

Low-power electronics are electronics, such as notebook processors, that have been designed to use less electric power than usual, often at some expense. In the case of notebook processors, this expense is processing power; notebook processors usually consume less power than their desktop counterparts, at the expense of lower processing power.

Microelectromechanical system oscillators Devices that generate highly stable reference frequencies to measure time. The core technologies used in MEMS oscillators have been in development since the mid-1960s, but have only been sufficiently advanced for commercial applications since 2006. MEMS oscillators incorporate MEMS resonators, which are microelectromechanical structures that define stable frequencies. MEMS clock generators are MEMS timing devices with multiple outputs for systems that need more than a single reference frequency. MEMS oscillators are a valid alternative to older, more established quartz crystal oscillators, offering better resilience against vibration and mechanical shock, and reliability with respect to temperature variation.

Electronic systems’ power consumption has been a real challenge for Hardware and Software designers as well as users especially in portable devices like cell phones and laptop computers. Power consumption also has been an issue for many industries that use computer systems heavily such as Internet service providers using servers or companies with many employees using computers and other computational devices. Many different approaches have been discovered by researchers to estimate power consumption efficiently. This survey paper focuses on the different methods where power consumption can be estimated or measured in real-time.

Physical unclonable function (PUF), sometimes also called physically unclonable function, is a physical entity that is embodied in a physical structure and is easy to evaluate but hard to predict.

In computing, energy proportionality is a measure of the relationship between power consumed in a computer system, and the rate at which useful work is done. If the overall power consumption is proportional to the computer's utilization, then the machine is said to be energy proportional. Equivalently stated, for an idealized energy proportional computer, the overall energy per operation is constant for all possible workloads and operating conditions.

Eby Friedman

Eby G. Friedman is an electrical engineer, and Distinguished Professor of Electrical and Computer Engineering at the University of Rochester. Friedman is also a Visiting Professor at the Technion - Israel Institute of Technology. He is a Senior Fulbright Fellow and a Fellow of the IEEE.

MOSFET applications Wikimedia list article

The metal–oxide–semiconductor field-effect transistor, also known as the metal–oxide–silicon transistor, is a type of insulated-gate field-effect transistor (IGFET) that is fabricated by the controlled oxidation of a semiconductor, typically silicon. The voltage of the covered gate determines the electrical conductivity of the device; this ability to change conductivity with the amount of applied voltage can be used for amplifying or switching electronic signals.

Trevor Mudge is a computer scientist, academic and researcher. He is the Bredt Family Chair of Computer Science and Engineering, and Professor of Electrical Engineering and Computer Science at the University of Michigan.

References

  1. ↑ Keller, Ben; Cochet, Martin; Zimmer, Brian; Lee, Yunsup; Blagojevic, Milovan; Kwak, Jaehwa; Puggelli, Alberto; Bailey, Stevo; Chiu, Pi-Feng; Dabbelt, Palmer; Schmidt, Colin; Alon, Elad; Asanovic, Krste; Nikolic, Borivoje (2016). "Sub-microsecond adaptive voltage scaling in a 28nm FD-SOI processor SoC" (PDF). ESSCIRC Conference 2016: 42nd European Solid-State Circuits Conference. pp. 269–272. doi:10.1109/ESSCIRC.2016.7598294. ISBN   978-1-5090-2972-3. S2CID   28473665.
  2. ↑ Horowitz, M.; Alon, E.; Patil, D.; Naffziger, S.; Kumar, R.; Bernstein, K. (2005). "Scaling, power, and the future of CMOS" (PDF). IEEE International Electron Devices Meeting, 2005. IEDM Technical Digest. pp. 9–15. doi:10.1109/IEDM.2005.1609253. ISBN   0-7803-9268-X. S2CID   114793159.
  3. ↑ Kushwaha, Sunita; Kumar, Sanjay (2016). "Energy Saving Approaches for Scheduling on Parallel Systems - A Review". International Journal of Computer Applications. 152 (4): 38–42. doi: 10.5120/ijca2016911798 . S2CID   29261059.
  4. 1 2 3 4 5 Texas Instruments — Application Report (March 2014). "Adaptive (Dynamic) Voltage (Frequency) Scaling—Motivation and Implementation". doi:10.1109/TVLSI.2007.896909. S2CID   12638702.{{cite journal}}: Cite journal requires |journal= (help)
  5. 1 2 3 4 5 Gupte, Ajit; Dwivedi, Satyam; Mehta, Nandish; Amrutur, Bharadwaj (2011). "Adaptative Techniques to Reduce Power in Digital Circuits". Journal of Low Power Electronics and Applications. 1 (2): 261–276. doi: 10.3390/jlpea1020261 .
  6. ↑ Nakai, M.; Akui, S.; Seno, K.; Meguro, T.; Seki, T.; Kondo, T.; Hashiguchi, A.; Kawahara, H.; Kumano, K. (2005). "Dynamic voltage and frequency management for a low-power embedded microprocessor". IEEE Journal of Solid-State Circuits. 40 (1): 28–35. Bibcode:2005IJSSC..40...28N. doi:10.1109/JSSC.2004.838021. ISSN   0018-9200. S2CID   62637419.
  7. ↑ Rabaey, Jan M. (2009). Low power design essentials. New York: Springer. ISBN   9780387717135. OCLC   405547044.
  8. 1 2 3 4 5 6 Elgebaly, M.; Sachdev, M. (2007). "Variation-Aware Adaptive Voltage Scaling System". IEEE Transactions on Very Large Scale Integration (VLSI) Systems. 15 (5): 560–571. doi:10.1109/TVLSI.2007.896909. ISSN   1063-8210. S2CID   12638702.
  9. 1 2 Gupte, Ajit; Dwivedi, Satyam; Mehta, Nandish; Amrutur, Bharadwaj (2011). "Adaptative Techniques to Reduce Power in Digital Circuits". Journal of Low Power Electronics and Applications. 1 (2): 261–276. doi: 10.3390/jlpea1020261 .
  10. 1 2 Chan, Tuck-Boon; Chan, Wei-Ting Jonas; Kahng, Andrew B. (March 2013). "Impact of Adaptive Voltage Scaling on Aging-Aware Signoff" (PDF). Proceedings of the Conference on Design, Automation and Test in Europe: 1683–1688. CiteSeerX   10.1.1.310.2413 . doi:10.7873/DATE.2013.340. ISBN   9781467350716. S2CID   140692.
  11. ↑ Calimera, Andrea; Rizzo, Roberto Giorgio (2019). "Implementing Adaptive Voltage Over-Scaling: Algorithmic Noise Tolerance vs. Approximate Error Detection". Journal of Low Power Electronics and Applications. 9 (2): 17. doi: 10.3390/jlpea9020017 .
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.