AS.57 Ambassador | |
---|---|
General information | |
Type | Airliner |
Manufacturer | Airspeed Ltd |
Status | Retired |
Primary user | British European Airways |
Number built | 23 [1] |
History | |
Manufactured | 1947–1953 |
Introduction date | 1951 |
First flight | 10 July 1947 |
The Airspeed AS.57 Ambassador is a British twin piston-engined airliner that was designed and produced by the British aircraft manufacturer Airspeed Ltd. It was one of the first postwar airliners to be produced.
The Ambassador was developed in response to a requirement identified by the Brabazon Committee for a twin-engined short-to-medium-haul airliner as a replacement for the ubiquitous Douglas DC-3. Airspeed assembled a dispersed design team at Fairmile Manor, Cobham, Surrey, in 1943, which initially worked on a smaller proposal powered by Bristol Hercules radial engines; this was quickly superseded by a larger-capacity design aimed at better fulfilling the expansion in postwar civil air travel, although several entities doubted Airspeed's projected growth in air travel. Fitted with the new but conventional Bristol Centaurus radial engines, the Ambassador was designed to accommodate four Napier Nomad turbo-compound engines, a then-recent innovation. Its fuselage was compatible with pressurisation, this being an optional feature offered to customers.
On 10 July 1947, the first prototype Ambassador conducted its maiden flight at Christchurch with chief test pilot George Errington at the controls; a total of three prototypes were built. Early on, British European Airways (BEA) emerged as a key customer for the type, having placed a £3 million order for 20 aircraft in September 1948. Introducing the Ambassador to service in 1951, BEA often referred to the aircraft as the "Elizabethans", as the aircraft were used for the airline's "Elizabethan Class" passenger service. However, the type was quickly outperformed by the turboprop-powered Vickers Viscount, with BEA opting to withdraw its Ambassadors in 1958.
Secondhand aircraft were operated by several other airlines, including Dan-Air and Northeast Airlines. Despite being produced in relatively small numbers, the Ambassador was operational for longer than had been anticipated by planners. [1]
The origins of the Ambassador can be traced to 1943 and the work of the Brabazon Committee, which sought to define what types of aircraft would be desired by the postwar civil aviation sector. One of the committee's recommendations was a twin-engined short-to-medium-haul replacement for the Douglas DC-3, known as the Type 2. [2] The British manufacturer Airspeed Ltd. was interested in this requirement and established a small design team to work on the project from a dispersed office in Fairmile Manor at Cobham in Surrey in 1943. This effort was headed by ex-de Havilland aeronautical engineer Arthur Hagg, who had joined the company earlier that year. [1]
Early concepts included an unpressurised aircraft in the 14.5-ton gross weight class to be powered by a pair of Bristol Hercules radial engines. [3] Work on the endeavour was taken as far as possible without impacting Airspeed's wartime production activity, as the Second World War was still raging. [4] In response to changes in planner's preferences, dictating that the interim aircraft be procured so that airliners such as the in-development Ambassador had more development time, thus the design was revised substantially to expand its capacity. By 1944, it was a considerably larger design than the DC-3, with improved comfort and space. [5]
While Airspeed's management believed that postwar demands would demand greater passenger capacities, several figures, including those within the British Overseas Airways Corporation (BOAC) and the Air Ministry, were less enthusiastic with their projections. [6] The company also promoted the economics of higher utilisation rates and elevated cruise speeds, whereas conventional wisdom amongst airlines was to avoid increasing speeds to reduce fuel consumption. For the Ambassador, Airspeed opted to pursue a cruising altitude of 20,000 ft, relatively high for the era. [7] A comprehensive mockup was completed by November 1944, largely for promotional purposes, while the projected operating cost figures were released during early 1945. [7]
Immediately following the end of the conflict, the British Ministry of Aircraft Production placed an order with the company to produce a pair of prototypes. [8] While the first prototype was to be unpressurised and powered by a pair of Bristol Centaurus radial engines, it was envisioned that the second prototype would feature a reinforced fuselage compatible with pressurisation and a wing that could accommodate four Napier Nomad turboprop engines. Several officials, including company chairman Alan Samuel Butler, favored the adoption of the new turbopropeller engines. [8] [2] By the end of 1945, work had commenced on building structural test sections and jigs. [7]
On 10 July 1947, the first prototype, registered G-AGUA, conducted the type's maiden flight, flown by chief test pilot George B.S. Errington. [8] After the generally successful first flight, the prototype underwent a month of alterations, including deleting the spring tab and replacing it with geared tabs fitted to the outer rudders and locking the inner rudder; reversible propellers were also installed. During September 1947, the prototype made its first public display alongside elements of the second prototype, including its cockpit and control system, at the Society of British Aircraft Constructors (SBAC) show at Radlett. [9]
On 22 November 1947, the programme received a setback when the prototype was forced to perform a belly landing after the port undercarriage leg failed to deploy due to a loss of hydraulic pressure. [9] This did not seemingly deter customer confidence, as the newly created operator British European Airways (BEA) continued to openly express their preference for the type, and in September they placed a £3 million order for 20 Ambassadors. [10] [11] This support was so impactful that, according to aviation author H. A. Taylor, rival aircraft manufacturer Vickers was close to cancelling development of the Viscount over fears that airlines held a preference for advanced piston-powered airliners over the unfamiliar turboprop. [12]
During flight testing, it was found that the aircraft possessed particularly favourable low speed characteristics. [13] Having been explored in depth beforehand, this was dramatically displayed at the 1948 Farnborough Airshow, becoming the only aircraft in history to perform such an aerial display with one engine out throughout. This was a deliberate choice, with the inactive engine's propeller being feathered prior to taking off and remaining so until after landing. [14] The first prototype performed the majority of flight testing through late 1948. [15]
A total of three prototypes were constructed for the test programme. [10] The second Ambassador, G-AKRD, [16] was the first to feature pressurisation and was equipped with a full passenger cabin configuration for demonstration flights. [14] This second prototype was subsequently used by the Bristol Aeroplane Company from 1953 for flight-testing the Bristol Proteus 705 turbine engine. From March 1958, it was used by Rolls-Royce for testing the Dart and Tyne turboprops. [2] [17] The third prototype and first Ambassador 2 G-ALFR was initially used for BEA proving trials, [16] and in 1955 it also supported the development trials of the Napier Eland turbine engine. During 1958, intensive simulated airline flying, to pave the way for BEA Vanguards, was performed using two Tyne-powered Ambassadors. [18] [19]
During the latter stage of development, some issues were uncovered. [11] The wing, which had been designed to induce laminar flow characteristics, was relatively unconventional in its design; testing revealed that it lacked sufficient strength, and redesigning the wing was not straightforward. Technical assistance was provided by de Havilland and the issue was proven to be resolved in December 1949. [11] Three minor accidents during demonstration flights, while causing no serious damage, often delayed testing and did not inspire confidence amongst potential customers. [20] Quantity production of the Ambassador commenced during 1950, leading to the first production standard aircraft, destined for BEA, performing its first flight on 12 January 1951. [21]
The Airspeed Ambassador was an all-metal twin-engine airliner, designed to serve short-to-medium haul routes. [22] It was relatively advanced for the era, being relatively aerodynamically clean, having a high aspect–ratio wing with hoped-for near-Laminar flow characteristics, a tricycle undercarriage, a steerable nosewheel, integral fuel tanks, and other recent innovations. [13] Distinctive external features of the Ambassador included its three low tailfins and a long pointed nose, giving it a resemblance to the larger transcontinental Lockheed Constellation. Its tricycle gear gave it a more modern appearance than contemporaries such as the DC-3, Curtiss Commando, Avro Lancastrian and Vickers Vikings that were common on Europe's shorter airline routes.
In a standard configuration, the Ambassador could accommodate up to 47 passengers; somewhat unusually, its passenger cabin could be either pressurised or not as the customer preferred. [22] To reduce cabin noise levels, considerable effort went into soundproofing and general furnishings; Taylor described the Ambassador as being particularly quiet for a piston engine airliner, although also noting it could not equal the lower noise levels of turboprop-powered airliners such as the Vickers Viscount. [23] It was typically powered by conventional Bristol Centaurus radial engines, although individual aircraft were reengined with various powerplants, including turboprops. [17]
To increase cruise performance, designers made great efforts to minimise drag, using a NACA laminar-flow wing section. The predicted low-drag performance was not completely realized, however, due to structural features for wing construction, propeller slipstream over the inner wing, and increased skin roughness in actual service conditions. The engine nacelles were initially designed with inwardly-opening louvres for exhaust gases and cooling air rather than the usual outwardly opening "gills". However, these proved inadequate for cooling the engine, thus the gills were reinstated. Engine-out climb performance was enhanced by being able to feather the propeller using a zero-torque signal from the engine. [24]
During 1952, British European Airways (BEA) introduced the first of its 20 strong fleet of Ambassadors to revenue service, the airline referred to them as the "Elizabethan Class" in honour of the newly crowned Queen Elizabeth II. [10] The planned 1951 introduction date had been pushed to 1952 to address development issues. [11] By May 1951, intense proving trials of the Ambassador were being conducted by a joint team of Airspeed and BEA employees, while official BEA training commenced in August of that year. [21] The flagship of BEA's fleet was G-ALZN, appropriately named "RMA Elizabethan". [25] The first "Elizabethan" scheduled flight was from Heathrow Airport to Paris Le Bourget on 13 March 1952, soon the type was used across BEA's main UK routes. [26]
According to Taylor, the Ambassador's performance gave BEA a competitive edge over its rivals. [26] By December 1955, the "Elizabethan Class" had reached 2,230 flying hours annually, per aircraft, the highest in BEA's fleet. However, the rival Vickers Viscount, which was introduced in 1953, was even more popular with BEA's passengers than the Ambassador. [26] Rival airlines, such as Air France, had also quickly introduced the Viscount, and thus held an advantage over BEA's Elizabethan service. Accordingly, the airline decided to withdraw the type despite its relative youth, with BEA's final scheduled Ambassador flight on 30 July 1958. [26]
There were no further sales of the Ambassador. Aviation authors Bill Gunston and Peter Masefield laid this lack of success largely upon attitudes within de Havilland's management following its takeover of Airspeed in 1951; they allegedly preferred to use Airspeed's factory at Christchurch Airfield to produce military jets designed by de Havilland. [27] One example of de Havilland's undermining of potential sales was the recall of the Sales Director to de Havilland's headquarters at Hatfield Aerodrome (Hertfordshire, England) from Australia, despite his reportedly being near to finalizing an order from Trans-Australia Airlines for 12 Ambassadors. [28] Taylor observed that prospective customers were often sceptical that Airspeed, being a relatively small company, could be relied upon for technical support and components. [29]
Following the type's disposal by BEA, secondhand Ambassadors helped to establish the scheduled and charter flight operations of Dan-Air, an important airline in the development of the package holiday. The type was also used in the UK by Autair and BKS Air Transport. Secondhand Ambassadors were also flown for short periods by other airlines including Butler Air Transport (Australia), Globe Air (Switzerland) and Norrønafly (Norway). [30] [31] Multiple entities, such as Royal Dutch Shell and the Royal Jordanian Air Force, also procured Ambassadors for private purposes. [32]
The initial popularity of the Ambassador, with its pressurised cabin and good soundproofing, was soon eclipsed by the arrival of turboprop-powered aircraft such as the Vickers Viscount and, some years later, the Lockheed Electra, which featured more reliable engines and faster speeds.
One Elizabethan, Christopher Marlowe (G-ALZO, c/n 5226) is on display at the Imperial War Museum, Duxford near Cambridge having undergone major restoration by the Duxford Aviation Society. The restoration was completed in April 2013 and the aircraft is presently part of the Duxford Collection. [47]
Data fromAirspeed aircraft since 1931, [48] British Civil Aircraft since 1919 Volume 1 [49]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
Related lists
The Yakovlev Yak-40 is a regional jet designed by Yakovlev. The trijet's maiden flight was in 1966, and it was in production from 1967 to 1981. It was introduced to service in 1968, with export models following in 1970.
The Bristol Type 167 Brabazon was a large British piston-engined propeller-driven airliner designed by the Bristol Aeroplane Company to fly transatlantic routes between the UK and the United States. The type was named Brabazon after the Brabazon Committee and its chairman, Lord Brabazon of Tara, which had developed the specification to which the airliner was designed.
The Bristol Type 175 Britannia is a retired British medium-to-long-range airliner built by the Bristol Aeroplane Company in 1952 to meet British civilian aviation needs. During development two prototypes were lost and the turboprop engines proved susceptible to inlet icing, which delayed entry into service while solutions were sought.
The Vickers Viscount is a British medium-range turboprop airliner first flown in 1948 by Vickers-Armstrongs. A design requirement from the Brabazon Committee, it entered service in 1953 and was the first turboprop-powered airliner.
The Vickers Vanguard was a short/medium-range turboprop airliner designed and produced by the British aircraft manufacturer Vickers-Armstrongs.
The Handley Page HP.81 Hermes was a civilian airliner designed and produced by the British aircraft manufacturer Handley Page.
The British Aerospace Jetstream 41 is a turboprop-powered feederliner and regional airliner, designed by British Aerospace as a stretched version of the popular Jetstream 31. Intended to compete directly with 30-seat aircraft like the Embraer Brasilia, Dornier 328 and Saab 340, the new design eventually accommodated 29 passengers in a two-by-one arrangement like the Jetstream 31. Eastern Airways of the UK is the biggest operator of Jetstream 41s in the world, with 14 in the fleet.
The Rolls-Royce RB.53 Dart is a turboprop engine designed and manufactured by Rolls-Royce Limited. First run in 1946, it powered the Vickers Viscount on its maiden flight in 1948. A flight on July 29 of that year, which carried 14 paying passengers between Northolt and Paris–Le Bourget Airport in a Dart-powered Viscount, was the first regularly scheduled airline flight by a turbine-powered aircraft. The Viscount was the first turboprop-powered aircraft to enter airline service - British European Airways (BEA) in 1953.
The Vickers VC.1 Viking is a British twin-engine short-range airliner derived from the Vickers Wellington bomber and built by Vickers-Armstrongs Limited at Brooklands near Weybridge in Surrey. After the Second World War, the Viking was an important airliner with British airlines, pending the development of turboprop aircraft like the Viscount. An experimental airframe was fitted with Rolls-Royce Nene turbojets and first flown in 1948 as the world's first pure jet transport aircraft. Military developments were the Vickers Valetta and the Vickers Varsity.
The Short 360 is a commuter aircraft that was built by UK manufacturer Short Brothers during the 1980s. The Short 360 seats up to 39 passengers and was introduced into service in November 1982. It is a larger version of the Short 330.
The Handley Page HPR.7 Dart Herald is a British turboprop passenger aircraft, designed in the 1950s as a DC-3 replacement, but only entering service in the 1960s by which time it faced stiff competition from Fokker and Avro. Sales were disappointing, contributing in part to the demise of Handley Page in 1970.
The Beechcraft Model 99 is a civilian aircraft produced by Beechcraft. It is also known as the Beech 99 Airliner and the Commuter 99. The 99 is a twin-engine, unpressurized, 15 to 17 passenger seat turboprop aircraft, derived from the earlier Beechcraft King Air and Queen Air. It uses the wings of the Queen Air, the engines and nacelles of the King Air, and sub-systems from both, with a specifically designed nose structure.
The Airspeed Consul is a twin-engined light transport aircraft and affordable airliner designed and produced by the British aircraft manufacturer Airspeed Limited. Introduced during the immediate post-war period, it was a straightforward conversion of surplus Airspeed Oxford military trainers that had been extensively used during the Second World War.
The Aérospatiale N 262 is a French twin-turboprop high-wing airliner built first by Nord Aviation. The aircraft was also known as the Nord 262.
The Airspeed AS.6 Envoy was a twin-engined light transport aircraft designed and produced by the British aircraft manufacturer Airspeed Ltd.
The Airspeed AS.5 Courier was a British six-seat single-engined light aircraft, designed and produced by the British aircraft manufacturer Airspeed Limited at Portsmouth. It was the first British aircraft fitted with a retractable undercarriage to go into small quantity production.
The Airspeed AS.4 Ferry was three-engined ten-seat biplane airliner designed and built by the British aircraft manufacturer Airspeed Limited. It was the company's first powered aircraft to be produced.
The Handley Page (Reading) H.P.R.1 Marathon was a British four-engined civil transport aircraft, capable of seating up to 20 passengers. It was designed by Miles Aircraft Limited and largely manufactured by Handley Page (Reading) Limited at Woodley Aerodrome, Reading, England.
The Hawker Siddeley HS-121 Trident is a British airliner produced by Hawker Siddeley. In 1957, de Havilland proposed its DH.121 trijet design to a British European Airways (BEA) request. By 1960, de Havilland had been acquired by Hawker Siddeley. The Trident's maiden flight happened on 9 January 1962, and it was introduced on 1 April 1964, two months after its main competitor, the Boeing 727. By the end of the programme in 1978, 117 Tridents had been produced. The Trident was withdrawn from service in 1995.
The Short SC.7 Skyvan is a British 19-seat twin-turboprop aircraft first flown in 1963, that was manufactured by Short Brothers of Belfast, Northern Ireland. Featuring a basic rugged design and STOL capabilities, it was used in small numbers by airlines, and also by some smaller air forces. In more recent years the remaining examples were mostly used for short-haul freight and skydiving.