Akaflieg Darmstadt D-36 Circe

Last updated
D-36 Circe
Schleicher ASW12.jpg
The Schleicher ASW 12. This production glider was based closely on the D-36 Circe
RoleHigh performance sailplane
National origin Germany
Manufacturer Akaflieg Darmstadt
DesignerWolfe Lemke, Gerhard Waibel and Heiko Friess
First flight28 March 1964
Number built2
Developed into Schleicher ASW 12

The Akaflieg Darmstadt D-36 Circe is a single seat, high performance sailplane designed and built in Germany in the mid-1960s, one of the early "glass ships". It was the winner at the German National Championships in 1964 and came second in the World Championships the following year.

Contents

Design and development

The Akademische Fliegergruppe of the Technical University of Darmstadt (Akaflieg Darmstadt) was first formed in 1921. It was, and is, a group of aeronautical students who design and construct aircraft as part of their studies and with the help and encouragement of their University. Design work on the Circe began in 1962-3 by a team of students, Wolf Lemke (responsible for the wing), Gerhard Waibel (fuselage and tail) and Heiko Friess (airbrakes). They were later joined by the younger Klaus Holighaus. Professor Franz Wortmann designed a new airfoil for the Circe. Construction began in 1963 and the aircraft flew for the first time, piloted by Wolf Lemke, on 28 March 1964 at Gelnhausen. [1]

The Circe is built from composite materials, with flying surfaces and fuselage shells made from glass-balsa-glass sandwiches. The wings have a single spar with flanges of aligned glass fibre (uni-directional rovings) and a glass-balsa sandwich web. The fuselage has GRP-balsa stiffening cross-members. The wing is tapered in two sections, with more taper on the outer 40% of the span. [1] Such double taper plans can provide lift/drag ratios close to that of the ideal elliptical wing, and have benign stall characteristics. [2] Ailerons occupy all the trailing edge of the outer panels, with flaps across the inner panels. Four sets of Schempp-Hirth airbrakes, two per wing, are located just behind the spar, roughly centred on the inner panels. Each set extends its surfaces, mounted like parallel rulers, above and below the wing. They were difficult to design because of the considerable flexure of the wing, the latter leading to the Circe's nickname of Gummiflügel (English: Rubberwing) at a time of stiffer structures. [1]

The fuselage of the Circe is slender and circular in cross section aft of the shoulder mounted wings. The vertical tail is tall and rather upright, with some forward sweep on the rudder trailing edge. The original horizontal T-tail was straight tapered in plan, with sweep only on the leading edge. Forward of the wing leading edge the cockpit, housing the pilot in semi-reclining position, has a long, two piece canopy which swells above the rear fuselage line. The rear part of the canopy opens for access. The Circe has a retractable monowheel undercarriage, assisted by a tail bumper. [1]

The testing that followed the first flight showed that there was a tendency to tail flutter, so a long, projecting mass balance was added at the centre of the tailplane. The whole tail was later redesigned by Holighaus who produced a shorter fin and rudder and got rid of the sweep of the original horizontal surface by adding forward swept elevators. The tailplane was also significantly reduced in size. [1]

At about the same time as the V-1 was being constructed at Darmstadt, a second Circe, the V-2, was built by Walter Schneider. It differed from the V-1 in having a parachute brake rather than the spoilers of the V-1 and turned out rather heavier. [1]

Operational history

The V-1, flown by Waibel, won the German National Championships of 1964. Rolf Spärig flew it the following year in the 1965 World Championships, held at RAF South Cerney, Gloucestershire, UK, but was beaten into second place in the open class by the Polish Foka 4 flown by Jan Wroblewski, despite the Circe's better glide ratio. Most agreed the Circe was the most advanced sailplane at the Championships but that the Polish pilot's tactics were superior, not least as the Foka was a 15 m, standard class sailplane. During practice for the Championships, Spärig had flown the first-ever 500 km (311 mi) triangle in Germany. [1] [3]

The V-1 flew for another three years before suffering an in-flight structural failure and destruction. The pilot, Heli Lasch escaped by parachute. An investigation blamed him rather than the aircraft; the then still-novel glass sailplanes accelerated quickly and speed was easily misjudged when the traditional indicators, such as attitude or sound, were used. [1] The V-2 remained active until the mid-2000s. [4]

Variants

D-36 Circe V-1
Darmstadt built, Schempp-Hirth airbrakes.
D-36 Circe V-2
Built by Walter Schneider, drag parachute brake, heavier.

Aircraft on display

The Schneider built D-36 V-2, D-4686, is on display at the Deutsches Segelflugmuseum mit Modellflug, Wasserkuppe, Germany. [5]

Specifications (V-1)

Data fromSailplanes 1945-1965 [1]

General characteristics

Performance

See also

Related lists

Related Research Articles

<span class="mw-page-title-main">Schempp-Hirth Cirrus</span> German single-seat glider, 1967

The Schempp-Hirth Cirrus is an Open Class glider built by Schempp-Hirth between 1967 and 1971 and by VTC until 1977. It was replaced by the Nimbus 2.

The Schempp-Hirth HS-3 Nimbus was a prototype glider built by Klaus Holighaus.

<span class="mw-page-title-main">Schempp-Hirth Nimbus-2</span> German single-seat glider, 1971

The Schempp-Hirth Nimbus-2 is an Open Class glider built by Schempp-Hirth during the 1970s. The Nimbus-2 first flew in April 1971 and a total of over 240 examples of all subtypes have been built until the beginning of the 1980s. It replaced the Schempp-Hirth Cirrus.

<span class="mw-page-title-main">Schleicher ASW 12</span> German glider, 1965

The ASW 12, initially known as the AS 12, is a single-seat Sailplane of glass composite construction. The wing is shoulder mounted and it has a T-tail. It is essentially a developed production version of the Akaflieg Darmstadt D-36.

<span class="mw-page-title-main">Schneider ES-65</span> Type of aircraft

The Schneider ES-65 Platypus is a two-seater unflapped glider designed and built by Edmund Schneider Pty in Australia. A single prototype was built, which remains operational as of 2012.

The Schleicher ASW 17 is a single-seat Open Class sailplane that was built by the German manufacturer Alexander Schleicher GmbH & Co and first flew in 1971. It replaced the ASW 12, and was replaced in 1981 by the ASW 22.

<span class="mw-page-title-main">Akaflieg Braunschweig SB-5 Danzig</span> German single-seat glider, 1959

The Akaflieg Braunschweig SB-5 is a German single-seat Standard Class sailplane designed and prototyped by students of Brunswick University. More than 100 were built to their design, in several different variants.

<span class="mw-page-title-main">Akaflieg Darmstadt D-9 Konsul</span> German single-seat glider, 1923

The Akaflieg Darmstadt D-9 Konsul, often shortened to Darmstadt D-9 Konsul, was a high performance, single seat, cantilever monoplane sailplane, designed and built by a German University student group in 1923 for hill soaring.

The Akaflieg Darmstadt D-17 Darmstadt, also called the Darmstadt D-17 and Darmstadt I, was a high performance, single seat, cantilever monoplane sailplane, designed and built by a German University student design group in 1927. It was followed in 1928 by the Akaflieg Darmstadt D-19 Darmstadt 2, a similar aircraft with a new profile, longer span wing.

The Akaflieg Darmstadt D-34 sailplanes were a series of experimental single seat sailplanes, designed at the University of Darmstadt in the 1950s and early 1960s to explore the structural and aerodynamic advantages of the then emerging plastics and composite materials.

The Akaflieg Darmstadt D-40 is an experimental variable geometry single seat sailplane, fitted with almost full span, camber changing flaps for optimum aerodynamics in weak thermals and integrated into the wing so as to minimise flap tip drag. One flew successfully but the D-40, like other variable geometry sailplanes, was not commercialised.

The Akaflieg Darmstadt D-41 was a two-seat, side-by-side configuration sailplane designed to perform as well as tandem seaters. It was built in Germany in the 1990s and was used by Akaflieg Darmstadt students until it was lost in a crash.

The Akaflieg Braunschweig SB-11 is an experimental, single seat, variable geometry sailplane designed by aeronautical students in Germany. It won the 15 m span class at the World Gliding Championships of 1978 but its advances over the best, more conventional, opposition were not sufficient to lead to widespread imitation.

The experimental Hirth Hi-25 Kria was only the second glider constructed from glass reinforced plastic (GRP). Built in Germany in 1958, it was a single seat, 12 m (39.4 ft) span aircraft. Only one was built; it later flew for several years with Akaflieg Stuttgart.

The Akaflieg Braunschweig SB-7 Nimbus is a Standard class glider designed and built in Germany in the 1960s. It was one of a series of mixed glass fibre and wood designs from the students of Akaflieg Braunschweig.

The Akaflieg Braunschweig SB-8 is an experimental, single-seat, high performance glider built in Germany in the 1960s, constructed largely from glass fibre skin over built up balsa wood structure. Two were built; the second of which was later fitted with a high aspect ratio (30:1) wing, becoming the Akaflieg Braunschweig SB-9 Stratus.

<span class="mw-page-title-main">Siebert Sie-3</span> German single-seat standard class glider, 1968

The Siebert Sie-3 is a single-seat Standard class glider designed and produced in Germany in the 1960s for club use.

<span class="mw-page-title-main">SZD-42 Jantar 2</span> Type of aircraft

The SZD-42 Jantar 2 is a single seat Open Class competition glider, designed and produced in Poland in the 1970s. It features a span of over 20 m (66 ft) and elastic, camber changing flaps. It was placed second, third and seventh at the 1976 World Gliding Championships. Over one hundred were built and more than ninety remain registered.

The Akaflieg Braunschweig SB-6 Nixope was an early (1961) GRP high performance single seat glider designed and built in Germany by aeronautical students from Brunswick University. It competed in the 1961 German National gliding competition, coming sixth, and led directly to two further GRP aircraft.

The Bertoni Altinger AB-1 Superalbatros,, is a high-performance sailplane designed and built in Argentina in the 1950s and 1960s.

References

  1. 1 2 3 4 5 6 7 8 9 Simons, Martin (2006). Sailplanes 1945-1965 (2nd revised ed.). Königswinter: EQIP Werbung & Verlag GmbH. pp.  266–8. ISBN   3-9807977-4-0.
  2. ↑ Klaus Holighaus (12 February 1971). "The influence of planform and airfoil on the design of high performance sailplane wings with very high aspect ratio (low Re-numbers)" . Retrieved 28 January 2012.
  3. ↑ "World Gliding Championships 1965". Flight . Vol. 87, no. 2937. 24 June 1965. pp. 1028–9.
  4. ↑ Simons, Martin (2005). Sailplanes 1965-2000 (2nd revised ed.). Königswinter: EQIP Werbung & Verlag GmbH. p.  8. ISBN   3-9808838-1-7.
  5. ↑ Ogden, Bob (2009). Aviation Museums and Collections of Mainland Europe. Air Britain (Historians) Ltd. p. 210. ISBN   978-0-85130-418-2.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.