Area codes 270 and 364

Last updated
Kentucky's numbering plan areas, and area codes 270/364 (light green) Area codes KY.png
Kentucky's numbering plan areas, and area codes 270/364 (light green)

Area codes 270 and 364 are telephone overlay area codes in the North American Numbering Plan (NANP) for the Commonwealth of Kentucky's western and south central counties. Area code 270 was assigned in a split of numbering plan area 502 in 1999. [1] Area code 364 was added to the same numbering plan area in 2014, after having been first considered for 270-relief planning in 2007. Major cities in the numbering plan area include Hopkinsville, Paducah, Henderson, Murray, Bowling Green, Owensboro, Elizabethtown, and Madisonville. It also includes Kentucky's share of Fort Campbell.

Contents

History

When the American Telephone and Telegraph Company (AT&T) designed the first nationwide telephone numbering plan for Operator Toll Dialing in 1947, the entire state of Kentucky was designated as a single numbering plan area, and was assigned area code 502 as one of the 86 original North American area codes. [2]

The eastern half of the state was assigned area code 606 in 1954, [3] while the western half received area code 270 in 1999. [4]

The split generally followed the boundary between the Eastern and Central time zones; generally, Kentucky's share of the Central Time Zone became 270.

The creation of 270 was intended as a long-term solution. However, within only six years, 270 was already close to exhaustion due to the proliferation of cell phones and pagers. In 2006, Kentucky officials announced that 270 would run out of numbers in late 2007. [5] [6] On May 31, 2007, the Kentucky Public Service Commission (PSC) announced that 270 would be split along the Pennyrile Parkway, with a newly created area code serving western Kentucky (Paducah, Hopkinsville, Henderson, Madisonville, Murray, and the Kentucky side of Fort Campbell), with west-central Kentucky (Bowling Green, Owensboro and Elizabethtown) retaining 270. [7]

The PSC noted that mandatory number pooling, recently imposed on the region, may delay the implementation of the new code—and thus spare customers in the territory slated to move to 364 the expense and burden of having to change their numbers for the second time in a decade. Surprisingly, Kentucky's two most urbanized numbering plan areas, 502 (Louisville) and 859 (serving Lexington and Northern Kentucky), were not expected to exhaust until 2017 at the earliest, even though they have fewer numbers than 270.

On June 13, 2007, the PSC announced that the new area code will be 364, but also announced that the previously announced implementation would be delayed in favor of number conservation measures including expanded number pooling. [8] On June 15, 2007, the PSC postponed the permissive dialing of the new 364 area code to October 1, 2008. Mandatory dialing to the new area code was changed as well, but the actual date was to be determined later by the PSC. [9] On November 1, 2007, the PSC again postponed permissive dialing of the new 364 area code, this time to January 1, 2009. [10] On March 31, 2008, the PSC again postponed permissive dialing of the new 364 area code, to April 1, 2010. A date for mandatory dialing to 364 was left undetermined. [11]

On June 2, 2009, the PSC again postponed permissive dialing of the new 364 area code, to January 1, 2012. Mandatory dialing to 364 was still left undetermined. [12] The split was suspended indefinitely on August 13, 2010, with no permissive dialing date. [13] In December 2010, relief was suspended completely and was believed to be dead. [14] These subsequent delays of the implementation of the 270 / 364 area code split were due to further use of number conservation measures, including mandatory and expanded number pooling, as well as a weakened economy and a reduced usage of telephone numbers dedicated for use by computer and fax modems.

On September 27, 2012, the PSC announced that all number conservation options had been exhausted, and the implementation of 364 could no longer be delayed. According to the PSC, NANPA projected the 270 region would exhaust by the first quarter of 2014. NANPA recommended that instead of the original proposal for a split, 364 should be implemented as an overlay for the 270 region. Under the NANPA proposal, existing 270 numbers would be retained by customers, but 10-digit dialing for local calls would be required across western Kentucky. [15]

The PSC also considered an alternate proposal to split the 270 area code region. "Splitting the area code in two avoids ten digit dialing but requires changing all current area code 270 numbers within the new area code to 364. That includes numbers assigned to wireless devices," said Andrew Melnykovych, Director of Communications for the PSC. The commission announced plans to hold public meetings throughout the 270 region the next month to explain the options and receive public comment. The commission also said that it will accept comments on the industry's overlay proposal for the 270 region up through November 16, 2012. [16]

See also

Related Research Articles

<span class="mw-page-title-main">Area codes 850 and 448</span> Area codes in Florida, United States

Area codes 850 and 448 are telephone area codes in the North American Numbering Plan for the Florida Panhandle, including Pensacola, Tallahassee and Panama City. Area code 850 was created in 1997 in a split from 904, and area code 448 was assigned as a second code to the same area in an overlay plan in 2019, and mandatory ten-digit local calling began in May 2021.

Ten-digit dialing is a telephone dialing procedure in the countries and territories that are members of the North American Numbering Plan (NANP). It is the practice of including the area code of a telephone number when dialing to initiate a telephone call. When necessary, the ten-digit number may be prefixed with the trunk code 1, which is referred to as 1+10-digit dialing or national format.

<span class="mw-page-title-main">Area codes 920 and 274</span> Area code in eastern Wisconsin, United States

Area codes 920 and 274 are telephone area codes in the North American Numbering Plan (NANP) for a large area of eastern Wisconsin. Area code 920 was created on July 26, 1997, in a split of area code 414, one of the original North American area codes of 1947. 274 was added to the same numbering plan area (NPA) on May 5, 2023 to create an area code overlay.

<span class="mw-page-title-main">Area codes 310 and 424</span> Area codes in the Los Angeles metropolitan area

Area codes 310 and 424 are telephone area codes in the North American Numbering Plan (NANP) for the U.S. state of California. The numbering plan area includes the West Los Angeles and South Bay areas of Los Angeles County, a small portion of Ventura County, and Santa Catalina Island, which is located 26 miles (42 km) south.

<span class="mw-page-title-main">Area codes 909 and 840</span> Area codes in southern California, United States

Area codes 909 and 840 are telephone area codes in the North American Numbering Plan for the far-eastern part of Los Angeles County and southwestern San Bernardino County in the U.S. state of California. Area code 909 was created on November 14, 1992 in an area code split of 714, and 840 was added to the numbering plan area to form an overlay complex effective February 23, 2021.

<span class="mw-page-title-main">Area codes 718, 347, and 929</span> Area codes in New York City

Area codes 718, 347, and 929 are telephone area codes in the North American Numbering Plan (NANP) for the New York City boroughs of the Bronx, Brooklyn, Queens, and Staten Island, as well as the Marble Hill section of Manhattan. They are part of a larger overlay plan with area code 917, which comprises all of New York City.

<span class="mw-page-title-main">Area codes 608 and 353</span> Telephone area code for southwestern Wisconsin

Area codes 608 and 353 are telephone area codes in the North American Numbering Plan for much of southwestern Wisconsin, including the state capital city Madison. Area code 608 was assigned in 1955 to a numbering plan area created from areas with area code 414 and area code 715, and was the third area code created in Wisconsin. Rapid growth of the area, specifically in Dane County, brought the area code close to exhaustion of central office prefixes, with NANPA projections in 2022 projecting the need for relief by late 2023. In September 2022, the Wisconsin Public Service Commission and North American Numbering Plan Administrator (NANPA) announced an overlay complex for the numbering plan area with new area code 353, with an in-service date of September 15, 2023. New central office code orders were accepted starting on July 11, 2023, but activatlon is contingent on complete exhaustion of central office codes for 608.

<span class="mw-page-title-main">Area codes 801 and 385</span> Area codes for greater Salt Lake City, UT

Area codes 801 and 385 are telephone area codes in the North American Numbering Plan (NANP) serving Salt Lake City and the four surrounding counties of the Wasatch Front in north-central Utah. The numbering plan area comprises Davis, Morgan, Salt Lake, Utah, and Weber counties. Other major towns and cities within the area are Alta, American Fork, Bountiful, Layton, Lehi, Murray, Ogden, Orem, Provo, Sandy, South Jordan, Spanish Fork, Taylorsville, West Jordan, and West Valley City. This numbering plan area is located in the Mountain Time Zone. Area code 801 is one of the original North American area codes created in 1947. Area code 385 was assigned to the same numbering plan area in 2008, creating an overlay complex.

Area codes 615 and 629 are area codes in Tennessee serving Nashville and the 12 surrounding counties. 615 is the main area code, while 629 is an overlay covering the same area that began service in 2014. Murfreesboro, Franklin, Brentwood, Gallatin, Hendersonville, and Lebanon are other major cities in the 615/629 service territory.

<span class="mw-page-title-main">Area codes 510 and 341</span> Area codes covering Oakland and the East Bay of California

Area codes 510 and 341 are telephone area codes in the North American Numbering Plan (NANP) serving much of the East Bay in the U.S. state of California. They cover parts of Contra Costa County and western Alameda County, including the city of Oakland, but excluding Dublin, Livermore, Pleasanton, and Sunol.

<span class="mw-page-title-main">Area codes 304 and 681</span> Area codes of West Virginia

Area codes 304 and 681 are telephone area codes in the North American Numbering Plan (NANP) for the entirety of the U.S. state of West Virginia. The numbering plan area was established in October 1947 with area code 304, as one of the eighty-six original North American area codes. Area code 681 was added to the same area in an overlay plan that took effect on March 28, 2009.

<span class="mw-page-title-main">Area codes 570 and 272</span> Northeast Pennsylvania area codes

Area codes 570 and 272 are telephone area codes in the North American Numbering Plan (NANP) for the northeast quadrant of the U.S. state of Pennsylvania. The numbering plan area (NPA) includes the cities or towns of Scranton, Wilkes-Barre, Williamsport, Stroudsburg, East Stroudsburg, Pittston, Carbondale, Hazleton, Clarks Summit, Towanda, Bloomsburg, Sayre, Tunkhannock, Berwick, Milford, Montrose, Honesdale, Pocono Pines, Nanticoke, Tamaqua, Shavertown, Dallas, Mahanoy City, Sunbury, Jim Thorpe, and extends as far south as Pottsville and as far west as Lock Haven. Area code 570 was created in 1998 in an split of area code 717, one of the original North American area codes. In 2013, the numbering plan area received a second area code, 272, creating an overlay plan, which required ten-digit dialing for the area.

<span class="mw-page-title-main">Area codes 317 and 463</span> Area codes that serve Indianapolis and most of its suburbs

Area codes 317 and 463 are telephone area codes in the North American Numbering Plan (NANP) for Indianapolis and nine surrounding counties in central Indiana. The numbering plan area (NPA) comprises all or parts of Marion, Boone, Hancock, Hamilton, Hendricks, Johnson, Madison, Morgan, and Shelby counties. 317 is the original area code of the NPA, created in 1947, while 463 is an overlay code for the same area that was added in 2016, making ten-digit dialing mandatory for all calls in the region.

<span class="mw-page-title-main">Area codes 513 and 283</span> Area code in southwest Ohio, US

Area codes 513 and 283 are telephone area codes in the North American Numbering Plan (NANP) for the southwest of the U.S. state of Ohio, including Cincinnati and surrounding cities, such as Forest Park, Hamilton, Lebanon, West Chester, Mason, Maineville, Middletown, Milford, Norwood, Oxford, Harrison, Cleves, Miamitown and Trenton.

<span class="mw-page-title-main">Area code 502</span> Area code in Kentucky, United States

Area code 502 is a telephone area code in the North American Numbering Plan for north-central Kentucky. The numbering plan area includes the city of Louisville, its suburbs, and the state capital, Frankfort.

<span class="mw-page-title-main">Area code 970</span> Colorado telephone area code

Area code 970 is a telephone area code in the North American Numbering Plan (NANP) for most of the western and northern parts of the U.S. state of Colorado. The numbering plan area includes Aspen, Breckenridge, Durango, Estes Park, Fort Collins, Glenwood Springs, Grand Junction, Greeley, Loveland, Silverthorne, Steamboat Springs, and Vail. It was established on April 2, 1995 in an area code split of area code 303, which was retained by the Denver area.

<span class="mw-page-title-main">Area code 816</span> Area code in northwestern Missouri, United States

Area code 816 is a telephone area code in the North American Numbering Plan (NANP) for Kansas City, St. Joseph, and all or part of 15 surrounding counties in northwestern Missouri. The numbering plan area originally comprised most of the northern and western two-thirds of the state, bordering with Arkansas, Illinois, Iowa, Kansas, Nebraska, and Oklahoma, but has been reduced to a ribbon bordering Kansas. 816 is one of the original 86 area codes created in 1947.

<span class="mw-page-title-main">Area code 870</span> Area code for eastern and southern Arkansas, United States

Area code 870 is a telephone area code in the North American Numbering Plan (NANP) for southern, eastern, and most of northern Arkansas. It was created on April 14, 1997 in a split from area code 501, Arkansas's original area code of 1947.

<span class="mw-page-title-main">Area code 859</span> Area code that serves the city of Lexington and the central portion of Kentucky

Area code 859 is a telephone area code in the North American Numbering Plan (NANP) for the city of Lexington and the central portion of the Commonwealth of Kentucky. It was created in a split from area code 606 in 1999.

<span class="mw-page-title-main">Area codes 843 and 854</span> Telephone area codes for eastern South Carolina, United States

Area codes 843 and 854 are telephone area codes in the North American Numbering Plan (NANP) for a portion of the U.S. state of South Carolina that comprises roughly the eastern third and the southern tip. The numbering plan area (NPA) includes the Grand Strand, the Lowcountry, the Pee Dee, and the Sandhills. Major cities in the region are Myrtle Beach, Charleston, Beaufort, Hilton Head Island and Florence. Area code 843 was created in 1998 when area code 803 was split, while 854 was added in 2015 to form an all-services overlay.

References

  1. "Planning Letter 155: Split of 502 Numbering Plan Area (NPA) in Kentucky" (PDF). Lockheed Martin (North American Numbering Plan Administration). February 1, 1999. Archived (PDF) from the original on May 10, 2013. Retrieved January 11, 2013.
  2. "NANP Area Code History: 1947". Archived from the original on 2006-10-16. Retrieved 2006-10-03.
  3. "NANP Area Code History: 1948 - 1959". Archived from the original on 2002-09-11. Retrieved 2006-10-03.
  4. "Planning Letter 155: Split of 501 Numbering Plan Area (NPA) in Kentucky" (PDF). Lockheed Martin (North American Numbering Plan Administration). February 1, 1999. Retrieved January 11, 2013.
  5. "PSC EXAMINING OPTIONS FOR AREA CODE 270" (PDF). Archived (PDF) from the original on 2009-04-08. Retrieved 2008-04-02.
  6. "PSC ANNOUNCES PUBLIC MEETINGS ON AREA CODE 270" (PDF). Archived (PDF) from the original on 2009-04-09. Retrieved 2008-04-02.
  7. "PSC DECIDES TO SPLIT AREA CODE 270" (PDF). Archived (PDF) from the original on 2009-04-08. Retrieved 2008-04-02.
  8. "364 WILL BE KENTUCKY'S NEWEST AREA CODE" (PDF). Archived (PDF) from the original on 2009-04-08. Retrieved 2008-04-02.
  9. "PSC DELAYS IMPLEMENTATION OF AREA CODE 364" (PDF). Archived (PDF) from the original on 2009-04-08. Retrieved 2008-04-02.
  10. "PSC POSTPONES IMPLEMENTATION OF AREA CODE 364" (PDF). Archived (PDF) from the original on 2009-04-08. Retrieved 2008-04-02.
  11. "PSC POSTPONES START DATE FOR AREA CODE 364 TO APRIL 2010" (PDF). Archived (PDF) from the original on 2009-04-08. Retrieved 2008-04-02.
  12. "Start Date for Area Code 364 Postponed Until January 2012" (PDF). Archived (PDF) from the original on 2009-07-02. Retrieved 2009-07-20.
  13. "KY 270 NPA; 2-way Split, Creating 364 NPA - Start of Permissive Suspended" (PDF). 2010-08-19. Archived (PDF) from the original on 2010-11-26. Retrieved 2010-08-20.
  14. Howington, Patrick (13 December 2010). "Planned new Western Kentucky area code cancelled". Courier-Journal. Retrieved 4 January 2014.(subscription required)
  15. "New Area Code Needed in Western Kentucky" (PDF). Archived (PDF) from the original on 2014-01-04. Retrieved 2012-09-28.
  16. "New Area Code Needed in Western Kentucky" (PDF). Archived (PDF) from the original on 2014-01-04. Retrieved 2012-09-28.
Kentucky area codes: 270/364, 502, 606, 859
North: 618, 812/930, 502, 859
West: 618, 573 270/364East: 502, 606
South: 731, 931, 615/629
Missouri area codes: 314/557, 417, 573, 636, 660, 816
Illinois area codes: 217, 224/847, 309, 312, 331/630, 618, 708, 773, 779/815, 872
Indiana area codes: 219, 260, 317/463, 574, 765, 812/930
Tennessee area codes: 423, 615/629, 731, 865, 901, 931