Area codes 704 and 980 are telephone area codes in the North American Numbering Plan (NANP) for Charlotte and all or part of 12 surrounding counties in south-central North Carolina. Other major cities in the service area are Gastonia, Kannapolis, Concord, Mooresville, Salisbury, Statesville, and Shelby. The South Carolina side of the Charlotte metropolitan area is part of area codes 803 and 839. Area code 704 is one of the original area codes assigned to numbering plan areas (NPAs) by AT&T in October 1947. Area code 980 was added in an overlay numbering plan in 2000.
The original area code, 704, was one of the original 86 numbering plan areas (NPAs) designated by AT&T in 1947, and originally covered the entire state of North Carolina. In 1954, the eastern two-thirds of the state–everything from Winston-Salem eastward–was split off as area code 919. 704 was reduced to the western third of the state, from Charlotte through the Blue Ridge Mountains to the Tennessee border.
This configuration remained in place for the next 44 years. Despite explosive growth in Charlotte, the state's largest city, the western third of the state was not as densely populated as the eastern two-thirds, which grew from having one area code to four from 1993 to 1998. However, by the mid-1990s, Charlotte's rapid growth and the ensuing demand for telephone lines made a split inevitable. The number shortage was exacerbated by the proliferation of cell phones, pagers and fax machines. In 1998, most of the western portion of the old 704 footprint, including the Foothills and Blue Ridge, were split off to create area code 828, restricting 704 to the Charlotte area.
The creation of 828 was intended as a long-term solution. Within two years, however, 704 was close to exhaustion once again due to Charlotte's continued growth, as well as the continued proliferation of cell phones and pagers.
To solve the problem, it was decided to assign 980 to Charlotte as North Carolina's first overlay. 980 entered service on May 1, 2000. On that date, a permissive dialing period began in which both 7- and 10-digit calls were both allowed. As of January 10, 2001, 10-digit dialing was mandatory. The first 980 numbers were assigned on February 10, 2001. [1] [2]
Even with the Charlotte area's continued growth, the 704/980 numbering pool is nowhere near exhaustion. Under the most recent NANP projections, the Charlotte area will not need another area code until at least mid-2047. [3]
Years after the introduction of mobile number portability, a number of cell phone customers on the South Carolina side of the Charlotte area have 704 numbers.
Area codes 954 and 754 are the telephone area codes in the North American Numbering Plan (NANP) for Broward County, Florida. Notable cities in the numbering plan area are Fort Lauderdale, Plantation, Hollywood, Parkland, Sunrise, Pompano Beach, Coral Springs, Deerfield Beach, Davie, Weston, Dania Beach, Oakland Park and Pembroke Pines.
In telecommunications, an area code overlay complex is a telephone numbering plan that assigns multiple area codes to a geographic numbering plan area (NPA). Area code overlays are implemented in territories of the North American Numbering Plan (NANP) to mitigate exhaustion of central office codes in growth areas. The method has been in use since 1992, and has been the exclusive method of area code relief since 2007.
Area codes 561 and 728 are telephone area codes in the North American Numbering Plan (NANP) for Palm Beach County in the U.S. state of Florida. 561 was created on May 13, 1996, in a split of area code 407. The numbering plan area (NPA) comprises nearly every major city in the county, the largest of which being West Palm Beach, Boca Raton, Wellington, Boynton Beach, Jupiter, Delray Beach, and Belle Glade. On March 10, 2023, area code 728 was added to the same numbering plan area to form an all-services distributed overlay.
Area codes 702 and 725 are telephone area codes in the North American Numbering Plan (NANP) for Clark County, including Las Vegas, in the U.S. state of Nevada. Area code 702 was one of the original North American area codes established in October 1947, and serviced the entire state of Nevada until 1998, when it was reduced to Las Vegas and the surrounding area. In 2014, area code 725 was added as an overlay plan covering the same area.
Area codes 541 and 458 are telephone area codes in the North American Numbering Plan (NANP) for most of the U.S. state of Oregon, excluding only the northwestern corner of the state. The service area includes the cities of Eugene, Springfield, Corvallis, Albany, Medford, Bend, Ashland, Klamath Falls, The Dalles, Burns, Lakeview, and Pendleton, as well as the coastal region from Lincoln County to the California border. Area code 541 was created in an area code split from area code 503 on November 5, 1995. Area code 458 was added to the same service area on February 10, 2010 to form an overlay.
Area codes 516 and 363 are telephone overlay area codes in the North American Numbering Plan (NANP) for the U.S. state of New York. The numbering plan area (NPA) comprises Nassau County on Long Island. Area code 516 was created in 1951 and 363 was added to the numbering plan area in 2023.
Area code 404 is a telephone area code in the North American Numbering Plan (NANP) for Atlanta, Georgia and its closest suburbs. This comprises roughly the area encircled by Interstate 285. It is an enclave area code, surrounded by area code 770, which serves most of Atlanta's suburbs. Both 404 and 770 are overlaid by area codes 678, 470, and 943.
Area codes 706 and 762 are telephone area codes in the North American Numbering Plan (NANP) for the northern and west central parts of Georgia, but excluding metropolitan Atlanta.
Area codes 876 and 658 are telephone area codes in the North American Numbering Plan (NANP) for Jamaica.
Area codes 801 and 385 are telephone area codes in the North American Numbering Plan (NANP) serving Salt Lake City and the four surrounding counties of the Wasatch Front in north-central Utah. The numbering plan area comprises Davis, Morgan, Salt Lake, Utah, and Weber counties. Other major towns and cities within the area are Alta, American Fork, Bountiful, Layton, Lehi, Murray, Ogden, Orem, Provo, Sandy, South Jordan, Spanish Fork, Taylorsville, West Jordan, and West Valley City. This numbering plan area is located in the Mountain Time Zone. Area code 801 is one of the original North American area codes created in 1947. Area code 385 was assigned to the same numbering plan area in 2008, creating an overlay complex.
Area codes 910 and 472 are telephone area codes in the North American Numbering Plan (NANP) for southeastern North Carolina. The area codes form an overlay for a numbering plan area (NPA) that includes the cities of Wilmington, Jacksonville, Laurinburg, Lumberton and Fayetteville. Area code 910 was established in 1993, and 472 was added to the same area in October 2022.
Area codes 778, 236, and 672 are telephone area codes in the North American Numbering Plan (NANP) for the Canadian province of British Columbia. They form an overlay complex with area code 604, which serves only a small southwestern section, the Lower Mainland, of the province, and area code 250, which serves the rest of the province.
Area code 604 is a telephone area code in the North American Numbering Plan for southwestern British Columbia, Canada. The numbering plan area comprises the Lower Mainland, Sunshine Coast, Howe Sound / Sea to Sky Corridor, Fraser Valley and the lower Fraser Canyon regions. The major city is Vancouver. The area code is one of the nine original North American area codes assigned to Canada in 1947.
Area codes 215, 267, and 445 are telephone area codes in the North American Numbering Plan (NANP) for Philadelphia and adjacent portions of Bucks and Montgomery counties in the U.S. state of Pennsylvania. Area code 215 was one of the original North American area codes established in 1947, while 267 and 445 are overlay codes for the same numbering plan area (NPA).
Area codes 410, 443, and 667 are telephone area codes in the North American Numbering Plan (NANP) for the eastern half of the U.S. state of Maryland. The numbering plan area (NPA) includes the Baltimore metropolitan area and the Eastern Shore. The three area codes are overlay codes for one numbering plan area, among which 410 was the initial area code for the NPA, when it was split from area code 301 in 1991. 443 and 667 found assignment primarily in cellular service and for competitive local exchange carriers, such as Comcast and Cavalier Telephone, when introduced, but have since become universal in carrier availability.
Area codes 803 and 839 are telephone area codes in the North American Numbering Plan (NANP) for the central part of the U.S. State of South Carolina. The numbering plan area (NPA) is anchored by the city of Columbia, the state capital. It also includes most of the South Carolina portions of the Charlotte, North Carolina and Augusta, Georgia metropolitan areas. 839, an all-service overlay, was approved by the South Carolina Public Service Commission in 2019.
Area codes 303, 720 and 983 are telephone area codes in the North American Numbering Plan for the north-central portion of the U.S. state of Colorado. The numbering plan area comprises Denver and Boulder, as well as their surrounding suburbs, including Lakewood, Littleton, Longmont, Broomfield, Aurora, and Castle Rock. Area code 303 is the original area code, while area codes 720 and 983 were added to form an overlay complex for the area, meaning that the same geographic service area is served by all area codes and that ten-digit dialing is required for all calls made within the service area.
Area code 828 is a telephone area code in the North American Numbering Plan (NANP) for most of the western third of the U.S. state of North Carolina. The numbering plan area (NPA) comprises the Blue Ridge Mountains and most of the Foothills. The largest city is Asheville.
Area codes 503 and 971 are telephone area codes in the North American Numbering Plan (NANP) for the northwestern region of the U.S. state of Oregon. The numbering plan area (NPA) comprises the cities of Portland, Salem, and Astoria. Area code 503 was one of the original North American area codes of 1947, assigned to the entire state until 1995, when its extent was reduced to the northwestern corner. Area code 971 was assigned to the service area in stages, completed in 2008, to form an overlay in the area with ten-digit dialing.
Area codes 919 and 984 are telephone area codes in the North American Numbering Plan (NANP) for all or parts of eleven counties in the east-central area of the U.S. state of North Carolina. They service the cities of Raleigh, Durham, Cary, and Chapel Hill/Carrboro, and the surrounding suburban areas of the Research Triangle metropolitan area, as well as the outlying towns and nearby rural areas of Oxford to the north, Sanford to the south, Goldsboro to the southeast, and Mebane to the west.
North: 336 / 743 | ||
West: 828 | 704 / 980 | East: 910 |
South: 803/839, 843/854 | ||
South Carolina area codes: 803/839, 843/854, 864 |