Area codes 910 and 472 are telephone area codes in the North American Numbering Plan (NANP) for southeastern North Carolina. The area codes form an overlay for a numbering plan area (NPA) that includes the cities of Wilmington, Jacksonville, Laurinburg, Lumberton and Fayetteville. Area code 910 was established in 1993, and 472 was added to the same area in October 2022.
Area code 910 was established in 1993 in an area code split from area code 919, and was North Carolina's first new area code in 39 years. It served a fan-shaped region in the southeastern and north-central portions of the state, including the Piedmont Triad, the Sandhills, and the southeastern coast. The two parts were only connected by a tendril in the Sandhills.
Within only three years, 910 was already on the brink of exhaustion due to rapid growth in the Triad, Wilmington and Fayetteville, as well as the proliferation of cell phones and pagers. On December 15, 1997, area code 336 was created for the Triad and most of the old 910 territory's western portion. Normally, when an area code is split, the more populated portion keeps the old area code–in this case, the Triad. However, it was decided to let the southeastern portion of the state keep 910.
Area code 910 has telephone numbers assigned for the central office code 988. 988 has been designated nationwide as a dialing code for the National Suicide Prevention Lifeline, which creates a conflict for exchanges that permit seven-digit dialing. This area code was therefore required to transition to ten-digit dialing, mandatory after October 24, 2021. [1]
With a forecast that numbers would run out by 2023, area code 472 was approved for use in the numbering plan area beginning on October 7, 2022. No permissive dialing period was necessary, as ten-digit dialing was already required. [2]
In 1962, AT&T assigned area code 510, then designated as a Service Access Code (SAC) of the format N10, for conversion to dial service of the Teletypewriter Exchange Service (TWX) in the United States. [3] [4] Later in the decade, additional area codes, including 810 were assigned. NPA 810 served every U.S. point west of the Mississippi River. Telex use of the area code was decommissioned in 1981 after conversion of the service to new transmission technologies by Western Union.
Area codes 716 and 624 are telephone area codes in the North American Numbering Plan (NANP) for Buffalo, Niagara Falls, and four surrounding counties in western New York. 716 was one of the original North American area codes established in 1947, while 624 was assigned to the identical numbering plan area (NPA) in 2023.
Area codes 561 and 728 are telephone area codes in the North American Numbering Plan (NANP) for Palm Beach County in the U.S. state of Florida. 561 was created on May 13, 1996, in a split of area code 407. The numbering plan area (NPA) comprises nearly every major city in the county, the largest of which being West Palm Beach, Boca Raton, Wellington, Boynton Beach, Jupiter, Delray Beach, and Belle Glade. On March 10, 2023, area code 728 was added to the same numbering plan area to form an all-services distributed overlay.
Area code 914 is the telephone area code in the North American Numbering Plan (NANP) for Westchester County, New York.
Area code 218 is a telephone area code in the North American Numbering Plan (NANP) for the northern part of the U.S. state of Minnesota. It is assigned to the largest of Minnesota's original two numbering plan areas (NPAs), although its geographical boundaries have been modified since inception. It comprises roughly the northern half of the state, and includes the cities of Duluth, Hibbing, Brainerd, Bemidji, Fergus Falls, and Moorhead.
Area codes 516 and 363 are telephone overlay area codes in the North American Numbering Plan (NANP) for the U.S. state of New York. The numbering plan area (NPA) comprises Nassau County on Long Island. Area code 516 was created in 1951, while area code 363 was added to the numbering plan area in 2023.
Area code 907 is a telephone area code in the North American Numbering Plan (NANP) for the U.S. state of Alaska, except for the small southeastern community of Hyder, which uses area codes 236, 250, and 778 of neighboring Stewart, British Columbia.
Area code 951 is a telephone area code in the North American Numbering Plan for western Riverside County in the southern part of the U.S. state of California. It was assigned in 2004 to a new numbering plan area that was created by an area code split of area code 909.
Area code 509 is the telephone area code in the North American Numbering Plan (NANP) for the eastern part of the U.S. state of Washington. The numbering plan area (NPA) roughly comprises the state east of the Cascade Mountains, and includes Spokane, the Tri-Cities, Ellensburg, Yakima, Walla Walla, and Wenatchee. The area code was assigned in a split of area code 206 in 1956.
Area code 989 is a telephone area code in the North American Numbering Plan for Central Michigan, the northeastern Lower Peninsula, and portions of the Thumb. It is the highest-numbered area code in use in the North American Numbering Plan (NANP), as well as the highest possible under the current system, in which a middle digit of 9 is forbidden.
Area code 319 is a telephone area code in the North American Numbering Plan (NANP) for the southeastern and east-central parts of the U.S. state of Iowa.
Area code 810 is a telephone area code in the North American Numbering Plan for the east-central part in the U.S. state of Michigan. The numbering plan area (NPA) comprises the cities of Flint, Lapeer, Port Huron, and the southern portion of the Thumb.
Area code 501 is a telephone area code in the North American Numbering Plan (NANP) for central Arkansas, including Little Rock and most of its suburbs. The numbering plan area (NPA) comprises most communities in Cleburne, Conway, Faulkner, Garland, Hot Spring, Lonoke, Perry, Pulaski, Saline, White and Van Buren counties.
Area codes 513 and 283 are telephone area codes in the North American Numbering Plan (NANP) for the southwest of the U.S. state of Ohio, including Cincinnati and surrounding cities, such as Forest Park, Hamilton, Lebanon, West Chester, Mason, Maineville, Middletown, Milford, Norwood, Oxford, Harrison, Cleves, Miamitown and Trenton.
Area code 719 is a telephone area code in the North American Numbering Plan (NANP) for the U.S. state of Colorado. The numbering plan area (NPA) includes Colorado Springs, Pueblo, Monument, Leadville, Alamosa, Monte Vista, the San Luis Valley, Cañon City, Trinidad, Rocky Ford, La Junta, Walsenburg and southeastern Colorado. It was created in a split of area code 303 on March 5, 1988. While 303 had been Colorado's sole area code for 40 years, the state's explosive growth in the second half of the 20th century made it apparent that the state would need another area code. 719 was split off when an impending number shortage meant the split could no longer be staved off.
Area code 515 is a telephone area code in the North American Numbering Plan (NANP) for most of the north-central part of the U.S. state of Iowa. The numbering plan area includes Des Moines, Ames, Ankeny, Humboldt, Boone, Fort Dodge, Jefferson, Johnston, Urbandale, Algona and Indianola.
Area code 912 is a telephone area code in the North American Numbering Plan (NANP) for the southeastern part of the U.S. state of Georgia. The numbering plan area contains Savannah, Richmond Hill, Hinesville, Vidalia, Metter, Reidsville, Homerville, Waycross, Brunswick, Folkston, Douglas, Statesboro, Ludowici, Jesup and Kingsland. The area code was created in 1954 in an area code split from area code 404, which had been assigned to the entire state in 1947.
Area codes 618 and 730 are telephone area codes in the North American Numbering Plan (NANP) for southern Illinois. The numbering plan area (NPA) comprises one hundred and twenty-six municipalities, such as Carbondale, Cairo, Belleville, East St. Louis, Edwardsville, Marion, O'Fallon, Alton, Mt. Vernon, Centralia, Herrin, Salem, Metropolis, Fairview Heights, Collinsville, and Granite City. Area code 618 was one of the original North American area codes created in 1947, and 730 was added to the plan area to form an overlay complex to satisfy the need for more telephone numbers in the region. The current population of the 618/730 area code is 1,288,816 people. It encompasses approximately 15,458 square mile ; and has a population density of 83.38 people per square mile.
Area code 710 is a special area code in the North American Numbering Plan (NANP). It was reserved for the federal government of the United States in 1983 for emergency services. Since 1994, the area code has provided access for authorized personnel to the Government Emergency Telecommunications Service (GETS) in the United States, and the Canadian local exchange carriers, and cellular/PCS networks. Previously, it was a Service Access Code (SAC) in the Teletypewriter Exchange Service (TWX) for the northeastern part of the United States.
Area codes 919 and 984 are telephone area codes in the North American Numbering Plan (NANP) for all or parts of eleven counties in the east-central area of the U.S. state of North Carolina. They service the cities of Raleigh, Durham, Cary, and Chapel Hill/Carrboro, and the surrounding suburban areas of the Research Triangle metropolitan area, as well as the outlying towns and nearby rural areas of Oxford to the north, Sanford to the south, Goldsboro to the southeast, and Mebane to the west.
| North: 252, 336/743, 919/984 | ||
| West: 704/980 | 910/472 | East: Atlantic Ocean |
| South: 843/854 | ||
| South Carolina area codes: 803/839, 843/854, 864/821 | ||