History
In early 1986, it was suggested at a Steamrail board meeting that something should be done to celebrate Australia's Bicentenary. Inspiration came from the Stockton & Darlington Railway 150th celebrations in England in 1975. Many ideas were canvassed, such as a visit by New South Wales locomotive 3801 and locomotives from other states.
In 1987, Mallard was supposed to visit to Australia. But due to the impending 50th anniversary of the locomotive's 126 miles per hour speed record in 1938, the National Railway Museum declined to allow the locomotive to leave the United Kingdom. Flying Scotsman was suggested as an alternative. But funding had to be arranged.
The owner of the Flying Scotsman, William McAlpine had his bank to do a credit search on Wal Stuchbery (the creator of Aus Steam '88) and his wife, to assess the soundness of the project. After satisfying himself that a repeat of Flying Scotsman's stranding in the United States in 1972 was not likely occur, McAlpine asked George Hinchcliffe, a former manager of the Flying Scotsman and a former director of Steamtown Railway Museum in Carnforth, where the locomotive was based, to help prepare it for the trip. Final agreement was reached when McAlpine met representatives of the Victorian Department of Transport, and the P&O shipping agent, in Transport House in Yarraville.
Although the Flying Scotsman was set to come to Australia, some problems were emerging. The New South Wales Bicentennial programme was taking its toll, with many locomotives failing and others not restored in time for the celebrations. Nevertheless, the stage was still being set for a spectacular event. Many steam locomotives from New South Wales, Australian Capital Territory and Victoria were available. South Australia was to be part of the celebration but a number of steam locomotives were not able to be restored in time. However many of that state's vintage diesels were able to take part. The two unions involved in the project, the Australian Federated Union of Locomotive Enginemen and the Australian Railways Union, were both very supportive of the committee.
Delivery Runs
On Friday 14 October 1988, the Rail Transport Museum's 4201 and the Canberra Railway Museum's 1210 left Goulburn with the first southbound tour train. It was to have included the Lachlan Valley Railway's 5367 but that engine failed with eccentric problems and was not able to make the journey. 3112 also failed on that day, but was able to meet up with 1210 later the next day. 4201 was substituting for the LVR's 4204 which failed motor traction problems. The train was split at Yass Junction. In the gathering dusk and rain, 1210 set off alone on the main line for Cootamundra, with a water gin and four end platform carriages, followed by the 42 class locomotive with the rest of the carriages. The locomotives were hauling a UK tour party train for the event.
On Saturday 15 October 3112 met up with 1210 overnight and set off from Albury to Melbourne. A parallel run had been planned with the Victorian Railways J515 south of Seymour, but it had to be abandoned due to the standard gauge locomotive's late running. R761 left Melbourne that day to meet up with 3801, the Railways of Australia Bicentennial Train, for a parallel run to Melbourne. 3801 departed Sydney with the Bicentennial Train, assisted by 5910 from Campbelltown to Goulburn.
On Sunday 16 October 3801 paralleled with R761 from Wodonga all the way to Melbourne. On the same day, the Flying Scotsman was unloaded at Sydney Harbour from the deck of the New Zealand Pacific and hauled to the Eveleigh Railway Workshops. On 17 October 4201 hauled the various carriages that had been left in Albury by 1210 and 3112 to Melbourne.
Program of Activities
On Tuesday 18 October 1988, two broad gauge trips between Melbourne and Geelong ran. On 19 October, Flying Scotsman left Sydney and, after making an overnight stop at Junee, it departed for Albury. While the locomotive was in Sydney, it made a trial run from Sydney to Port Kembla. During its run to Melbourne, it was welcomed by local residents at towns along the way. Many school children cheered the locomotive on. 3801 worked a return run from Melbourne to Seymour and R707 made an evening return run from Melbourne to Woodend.
On Friday 21 October, Elecrail's Tait set worked to Belgrave to connect with a Puffing Billy Railway special to Lakeside, hauled by the newly restored Climax locomotive 1694, double heading with an NA class 2-6-2T as far as Menzies Creek. It was the Climax's first run since its restoration.
On Saturday 22 October a triple parallel run with 3801, D3639, K153 and R761 occurred. 3801 ran on the standard and D3 639 and K153 on the broad gauge line were both parallel running from Melbourne to Somerton where they meet up with R761.
At Seymour, R761 have been derailed on the standard gauge diamond loop. Diesel locomotives were quickly organised to haul the standard gauge train and R761's train back to Melbourne, while D3 639 and K153 were able to return the third load. 3801 returned to Melbourne as a light engine and R761 headed home next morning.
On Sunday 23 October, an extensive locomotive collection was displayed at Spencer Street station:
- Victoria
- New South Wales
- South Australia
- London & North Eastern Railway
- Great Western Railway
R761 and K153 ran shuttle trips between Spencer Street and Flinders Street stations throughout the day, while the Elecrail Tait set ran a Mystery Tour. Beside the locomotives at Spencer Street, a good variety of road-based steam power, such as vintage trucks and buses, were on display. There were tram shuttles up Flinders Street.
On 25 October, the Flying Scotsman worked its first passenger trip in Australia, when it worked a return Melbourne to Albury service.
The Return Home
On Thursday 27 October, the New South Wales locomotives began the return to their home state. 1210 and 3112 worked a special tour to Albury with K153 running parallel as far as Seymour. 4201 headed for Albury, with C504 in the lead on an interstate freight train, C504 only made it to Donnybrook just north of Melbourne where it became a total failure, locomotive G517 came out from Melbourne to replace the C, and the G and 4201 hauled the freight to NSW. By the next morning, 4201, 1210 and 3112 had reached Cootamundra. 1210 worked alone with four platform end carriages. North from Harden, 1210 and 3112 then double headed to Yass, with 4201 doing the clearing up on its own.
1210 and 3112 ran shuttle trips on the Yass Town line. Meanwhile, 3801 the Bicentennial Train left Melbourne heading to Albury, running parallel with R707 as far as Seymour. On 30 October 3801 with 5910 set off on the home run to Sydney. However, Flying Scotsman stayed in Melbourne until 17 December.
The C38 class was a class of steam locomotive built for the New South Wales Government Railways in Australia.
Rail transport in Victoria, Australia, is provided by a number of railway operators who operate over the government-owned railway lines. The network consists of Victorian broad gauge lines, and an increasing number of standard gauge freight and interstate lines; the latter brought into existence as a result of gauge conversion of the former. Historically, a few experimental 762 mm gauge lines were built, along with various private logging, mining and industrial railways.
LNER Class A3 4472 Flying Scotsman is a 4-6-2 Pacific steam locomotive built in 1923 for the London and North Eastern Railway (LNER) at Doncaster Works to a design of Nigel Gresley. It was employed on long-distance express East Coast Main Line trains by the LNER and its successors, British Railways Eastern and North-Eastern Regions, notably on the London to Edinburgh Flying Scotsman train service after which it was named.
The NSW Rail Museum is the main railway museum in New South Wales, Australia. A division of Transport Heritage NSW, it was previously known as the New South Wales Rail Transport Museum (NSWRTM) and Trainworks.
3801 is a 4-6-2 steam locomotive operated by the New South Wales Government Railways between 1943 and 1974. It is arguably Australia's most famous steam locomotive, being the only one to have visited all mainland states and territories.
A headshunt is a short length of track provided to release locomotives at terminal platforms, or to allow shunting to take place clear of main lines.
East Coast Heritage Rail is a not for profit company limited by guarantee formed in June 1985 as 3801 Limited to operate steam locomotive 3801 and its associated rolling stock. The company operated heritage train tours from 1986 until 2017, with operations recommencing in February 2019 under the new brand, East Coast Heritage Rail.
The Spirit of Progress was the premier express passenger train on the Victorian Railways in Australia, running from Melbourne to the New South Wales border at Albury, and later through to Sydney.
The North East railway line is a railway line in Victoria, Australia. The line runs from Albury railway station in the border settlement of Albury–Wodonga to Southern Cross railway station on the western edge of the Melbourne central business district, serving the cities of Wangaratta and Seymour, and smaller towns in northeastern Victoria. The line, owned by VicTrack, but leased to, and maintained by, the Australian Rail Track Corporation, and forms part of the Sydney–Melbourne rail corridor.
The Victorian Railways S class was a class of 4-6-2 express passenger steam locomotive operated by the Victorian Railways (VR) in Australia between 1928 and 1954. Built when the VR was at its zenith and assigned to haul the broad gauge-leg of its Melbourne to Sydney interstate express passenger services, the S class remained the VR's most prestigious locomotive class until the advent of diesel electric locomotives in the early 1950s.
The Main Southern Railway is a major railway in New South Wales, Australia. It runs from Sydney to Albury, near the Victorian border. The line passes through the Southern Highlands, Southern Tablelands, South West Slopes and Riverina regions.
3830 is a 4-6-2 steam locomotive operated by the New South Wales Government Railways between 1949 and 1967. It has been preserved by the Powerhouse Museum and is based at the NSW Rail Museum, Thirlmere. It was operational from 1997 until 2009 and was scheduled to return to service in 2016 before the need for more extensive boiler repairs was discovered.
Yass Junction railway station is a heritage-listed railway station on the Main South line in New South Wales, Australia. It serves the town of Yass. The station is not in the town itself but is located approximately four kilometres away near the Hume Highway. The station was listed on the New South Wales State Heritage Register on 2 April 1999.
The Inter-Capital Daylight was a passenger train that operated between Australia's two largest cities, Sydney and Melbourne from March 1956 until August 1991.
The Albury line is a regional passenger rail service operated by V/Line in Victoria, Australia. It serves passengers between state capital Melbourne and the regional cities of Benalla, Wangaratta, Wodonga, and the NSW border city of Albury.
Locomotive 3642 is a two-cylinder, simple, non-condensing, coal-fired superheated, 4-6-0 36 class express passenger steam locomotive built for the New South Wales Government Railways in 1926 by Clyde Engineering. It is one of three 36 class locomotives that were preserved.
3112 is a two-cylinder, simple, non-condensing, saturated, coal-fired ‘Baltic’ type, 4-6-4 steam C30 class tank locomotive built for the New South Wales Government Railways in 1914 by Beyer, Peacock and Company.
1210 is a two-cylinder, simple, non-condensing, saturated, coal-fired ‘8 wheeler’ type, 4-4-0 steam locomotive built for the New South Wales Government Railways in 1878 by Beyer, Peacock and Company. It is part of the Z12 class of locomotives
The Western Endeavour was the first steam locomotive hauled train to operate across from Sydney on Australia's east coast to Perth on the west coast in 1970.