Backcountry Super Cubs Super Cub

Last updated

Super Cub
Backcountry Super Cub N360WY.jpg
Role Amateur-built aircraft
National origin United States
Manufacturer Backcountry Super Cubs
StatusIn production (2012)
Number built138
Developed from Piper PA-18 Super Cub

The Backcountry Super Cubs Super Cub, also referred to as the Supercub replica, is an American amateur-built aircraft, designed and produced by Backcountry Super Cubs of Douglas, Wyoming. The aircraft is based on the design of the Piper PA-18 Super Cub and is supplied as a kit for amateur construction. [1]

Contents

Design and development

The Super Cub features a strut-braced high-wing, a two-seats-in-tandem enclosed cockpit that is 30 in (76 cm) wide, fixed conventional landing gear and a single engine in tractor configuration. [1]

The aircraft fuselage is made from welded steel tubing, with the wings constructed of aluminum sheet, all covered in doped aircraft fabric. Its 37.7 ft (11.5 m) span wing has an area of 170 sq ft (16 m2), is supported by "V" struts with jury struts and mounts flaps. The aircraft's recommended engine power range is 180 to 240 hp (134 to 179 kW) and standard engines used include the 180 hp (134 kW) Lycoming O-360 four-stroke powerplant. The aircraft can be fitted with tundra tires for operation on soft or rough surfaces. Construction time from the supplied kit is 1200 hours. [1]

Operational history

By December 2011, 138 examples had been reported as completed and flown. [1]

Specifications (Super Cub)

Data from Kitplanes [1]

General characteristics

Performance

Related Research Articles

Barrows Bearhawk American homebuilt aircraft

The Barrows Bearhawk, now also called the Barrows 4-Place Bearhawk, is an American amateur-built aircraft, designed by Bob Barrows and produced by R&B Aircraft of Fincastle, Virginia, AviPro Aircraft and now Bearhawk Aircraft of Austin, Texas. The aircraft is supplied as a kit or as plans for amateur construction.

The Light Miniature Aircraft LM-5 series is a family of American high-wing, conventional landing gear, strut-braced, single-engine ultralight aircraft that are intended to resemble the Piper PA-18 Super Cub. The designs are all available as plans from Light Miniature Aircraft of Okeechobee, Florida for amateur construction.

Glasair Sportsman 2+2 Type of aircraft

The Glasair Sportsman 2+2 is a single-engine, high wing, strut-braced, four seat kit aircraft, developed by the Glasair Aviation company.

The Preceptor STOL King is an American STOL amateur-built aircraft that was designed and produced by Preceptor Aircraft, of Rutherfordton, North Carolina. When it was available the aircraft was supplied as plans or as a kit for amateur construction.

The Tapanee Levitation 4 is a Canadian four-seat STOL aircraft designed to be homebuilt by Michel Lequin for Tapanee Aviation of Mont-Saint-Michel, Quebec.

Murphy Elite Canadian homebuilt light aircraft

The Murphy Elite is a Canadian light aircraft that was designed and is produced by Murphy Aircraft of Chilliwack, British Columbia. The aircraft is supplied as a kit for amateur construction.

Zenair CH 640 Canadian homebuilt light aircraft

The Zenair Zodiac CH 640 is a Canadian light aircraft that was designed by Chris Heintz and is produced by Zenair in the form of a kit for amateur construction.

Barrows Bearhawk Patrol Type of aircraft

The Barrows Bearhawk Patrol is a two-seat aircraft, that was designed to meet United States homebuilt aircraft category requirements. It was developed from the four-seat Barrows Bearhawk.

Bushcaddy L-160 Canadian homebuilt light aircraft

The Bushcaddy L-160 is a Canadian kit aircraft that was designed by Jean Eudes Potvin and produced by Club Aeronautique Delisle Incorporated, Canadian Light Aircraft Sales and Service and most recently by Bushcaddy. The aircraft is supplied as a kit for amateur construction.

Bushcaddy L-162 Max Canadian homebuilt light aircraft

The Bushcaddy L-162 Max is a Canadian kit aircraft that was designed by Sean Gilmore and produced by Canadian Light Aircraft Sales and Service and most recently by Bushcaddy. The aircraft is supplied as a kit for amateur construction.

The Bushcaddy L-164 is a Canadian kit aircraft that was designed by Sean Gilmore and produced by Canadian Light Aircraft Sales and Service and most recently by Bushcaddy. The aircraft is supplied as a kit for amateur construction.

Glasair GlaStar American homebuilt airplane

The Glasair GlaStar is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation. It was first flown in 1994 and was superseded in production by the Glasair Sportsman 2+2 c. 2005. When it was available the aircraft was supplied as a kit for amateur construction.

Stoddard-Hamilton Glasair II American homebuilt light aircraft

The Stoddard-Hamilton Glasair II is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation as a kit for amateur construction. It was first flown in 1989, and remained in production in 2012.

Backcountry Super Cubs Mackey SQ2 American homebuilt aircraft

The Backcountry Super Cubs Mackey SQ2 is an American STOL amateur-built aircraft, designed and produced by Backcountry Super Cubs of Douglas, Wyoming. The aircraft is based upon the design of the Piper PA-18 Super Cub and is supplied as a kit for amateur construction.

The Backcountry Super Cubs Supercruiser is an American amateur-built aircraft, designed and produced by Backcountry Super Cubs of Douglas, Wyoming. The aircraft is based upon the design of the Piper PA-12 Super Cruiser and is supplied as a kit for amateur construction.

CubCrafters Carbon Cub EX American amateur-built aircraft

The CubCrafters Carbon Cub EX is an American amateur-built aircraft, designed and produced by Cub Crafters of Yakima, Washington. The aircraft is supplied as a kit for amateur construction.

Custom Flight North Star Canadian homebuilt light aircraft

The Custom Flight North Star is a Canadian amateur-built aircraft, designed by Morgan Williams and produced by Custom Flight of Tiny, Ontario. The aircraft is based on the Piper PA-18 Super Cub and is supplied as a kit for amateur construction.

Dakota Cub Super 18 American light aircraft

The Dakota Cub Super 18 is an American amateur-built aircraft, designed and produced by Dakota Cub of Sioux Falls, South Dakota. The aircraft is supplied as a kit for amateur construction.

The Raven 2XS is a Canadian aerobatic amateur-built biplane, designed and produced by Raven Aircraft of Surrey, British Columbia. The aircraft is supplied as a kit or as plans for amateur construction.

CubCrafters CC19-180 XCub American light aircraft

The CubCrafters CC19-180 XCub is an American light aircraft, designed and produced by Cub Crafters of Yakima, Washington, introduced in June 2016. The aircraft is supplied complete and ready-to-fly.

References

  1. 1 2 3 4 5 Vandermeullen, Richard: 2012 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 44. Belvoir Publications. ISSN 0891-1851