| CC19 XCub | |
|---|---|
 | |
| CubCrafters CC19-180 XCub | |
| Role | Light aircraft |
| National origin | United States |
| Manufacturer | Cub Crafters |
| Introduction | June 2016 |
| Status | In production (2016) |
| Number built | 20 (July 2016) |
| Developed from | CubCrafters Carbon Cub EX |
The CubCrafters CC19 XCub is an American light aircraft, designed and produced by Cub Crafters of Yakima, Washington, introduced in June 2016. The aircraft is supplied complete and ready-to-fly. [1] [2]
The XCub is a development of the CubCrafters Carbon Cub EX, with higher performance and incorporating even more carbon fiber in the structure. It traces its lineage to the 1949-vintage Piper PA-18 Super Cub design. [1] [2]
The XCub was developed in secret over a six-year period, 2010–2016, and was not publicly announced until Federal Aviation Administration (FAA) FAR 23 type certification had been completed. The certification process was completed using company internal resources and did not involve any venture capital, loans or customer deposits. [1] [2]
Type certification for day and night visual flight rules was granted by the FAA on 2 June 2016. [3] The CC19-180 was Type Certified by the European Aviation Safety Agency on 17 December 2017 and in Canada and Japan in August 2018. [4] [5]
On 26 March 2019 the aircraft was also certified by the FAA in the primary aircraft category, for reasons that the company has not disclosed. [6]
The aircraft features a V-strut-braced high-wing, a two-seats-in-tandem enclosed cockpit accessed via doors, fixed aluminium sprung conventional landing gear and a single engine in tractor configuration. [1] [2]
The aircraft is made from welded CNC-milled 4130 steel tubing, with its flying surfaces covered in doped aircraft fabric. Its 34.3 ft (10.5 m) span wing has an area of 174.8 sq ft (16.24 m2) and mounts flaps. The controls are driven by torque tubes, instead of cables, with the aileron tubes running inside the V-struts. The standard engine available is the 180 hp (134 kW) Lycoming O-360-C1 (CC363i) four-stroke powerplant, driving a Hartzell Trailblazer composite, constant speed propeller. In July 2019 a 215 hp (160 kW) version powered by a Lycoming IO-390 (CC393i) engine and a Hartzell Pathfinder three-bladed propeller was introduced as the CC19-215. [7] The new powerplant requires a new cowling and baffles. [1] [8] [9]
The aircraft has an empty weight of 1,216 lb (552 kg) and a gross weight of 2,300 lb (1,000 kg), giving a useful load of 1,084 lb (492 kg). [8]
The take-off and landing distance required at maximum gross weight has been demonstrated as 170 ft (52 m). [8]
In 2020 the manufacturer certified a new version of the design, the NXCub, (Nosewheel XCub) with tricycle landing gear, only available with the Lycoming IO-390 (CC393i) engine. [10] With additional parts, an XCub or NXCub can be readily converted between conventional and tricycle landing gear configurations, with NXCub simply being the model designation for aircraft factory-built with tricycle landing gear. The task of converting an aircraft requires two people and takes around four hours. An XCub or NXCub can also be fitted with floats. [11]
In reviewing the CC19-180 in June 2016 after an evaluation flight, AOPA reviewer Dave Hirschman concluded, "the 153-mph true airspeed top speed in level flight is impressive, but what’s far more meaningful to backcountry pilots is the tremendous range and operational flexibility they’ll have at more economical cruise settings. At a true airspeed of 120 mph, for example, an XCub pilot can cut fuel burn to 6 gph or less and have about eight hours endurance from a full tank (50 gallons) of avgas. At a normal Super Cub cruise of 100 mph, the XCub can cover 1,000 statute miles...The XCub is exhilarating to fly and aesthetically appealing inside and out. The clever layout of the panel, passenger seating, and stowage compartments show it was built by people who know their customers and the features they value." [2]
In another June 2016 flight review of the CC19-180, Paul Bertorelli of AVweb said, "The XCub has aluminum rather than steel or the Cub’s traditional bungee gear. This was a revelation for me because aluminum does a nice job of absorbing surplus touchdown energy; it’s far less energetic than steel or those blasted bungees in returning misdirected touchdown energy. This results in a unique feeling on touchdown. If you know you’re a little fast and you know you’re going to bounce, it’s just a small one and not the sharp-edged twang of steel or the slingshot of the bungees, but rather a firm pushback with no lateral wiggles at all. It’s quite confidence inducing because those small bounces don’t require the massive control inputs to arrest that a really bad spring-steel bounce would." [12]
At AirVenture in July 2016, the company announced that 20 CC19-180 XCubs had been sold. [13]
In a July 2016 review, Flying magazine writer Pia Bergqvist generally praised the CC19-180, but found fault with the flap mechanism and resulting pitch changes with flap deployment. She wrote, "One thing that takes a bit of getting used to is the flap mechanism. Flaps are adjusted with a large handle in the upper left corner of the cockpit. The location of the handle makes it easy to access, and each flap setting is in a notch to prevent slippage. To get the first flap in position, you have to push slightly forward before grabbing the trigger to release the latch. For the second and third notches, however, you need to pull back before the handle will release. It took a few approaches to get used to the opposite action. The new slotted flap design allows for air from the underside of the wing to flow over the flap surface. With the additional lift, the pitch increases a great deal with each flap setting. [Company president Randy] Lervold advised me to fly with some nose-down trim before adding flaps. Without using that technique, retrimming was definitely required after each notch to prevent going too slow." [14]
In a 2020 flight review of the tricycle landing gear-equipped CC19-180 NXCub model, KitPlanes magazine editor Marc Cook wrote, "truth is, for many pilots who came up in the period after 'real' Cubs made taildraggers the everyday airplane, the presence of a nosewheel on an airplane that’s as capable of off-pavement work as the NXCub will make the whole hard to resist. In fact, for many this is probably the backwoods airplane they’ve been waiting for all along." [10]
Data from Manufacturer and FAA [3] [8]
General characteristics
Performance
The PA-20 Pacer and PA-22 Tri-Pacer, Caribbean, and Colt are an American family of light strut-braced high-wing monoplane aircraft built by Piper Aircraft from 1949 to 1964.
The Beechcraft Musketeer is a family of single-engined, low-wing, light aircraft that was produced by Beechcraft. The line includes the Model 19 Musketeer Sport, the Model 23 Musketeer, Custom and Sundowner, the Model 23-24 Musketeer Super III, the retractable gear Model 24R Sierra and the military CT-134 Musketeer.
The Symphony SA-160 is a CAR 523 certified, two-seat, single-engine, high-wing airplane that was manufactured by Symphony Aircraft Industries in Trois-Rivières, Quebec, Canada in the mid-2000s.
The Diamond DA40 Diamond Star is an Austrian four-seat, single-engine, light aircraft constructed from composite materials. Built in both Austria and Canada, it was developed as a four-seat version of the earlier DA20 by Diamond Aircraft Industries.
The Lancair Legacy, a modernized version of the Lancair 320, is a low-wing two-place retractable-gear composite monoplane manufactured by the American company Lancair. It is available as a kit that cost US$71,500 in 2011. There is also a fixed-gear version, the Legacy FG. The retractable version of the Legacy cruises at 276 mph at 8,000 ft and the fixed gear version cruises at 215 mph.
The Found FBA-2 is a 1960s Canadian four/five-seat cabin monoplane that was produced by Found Aircraft.
The American Legend AL3, AL11, and AL18 are a series of American light-sport aircraft inspired by the Piper Cub family.
The Glasair Sportsman 2+2 is a single-engine, high wing, strut-braced, four seat kit aircraft, developed by the Glasair Aviation company.
The CubCrafters CC11-160 Carbon Cub SS is an ASTM certified light-sport aircraft based on the Piper J-3 Cub manufactured by Cub Crafters. It is modernized, with light-weight carbon fiber components and a 180 hp (130 kW) engine.
The Tecnam 2010 is a four-seat, high wing, single engine light aircraft of mixed metal and carbon-fiber-reinforced polymer construction. Designed and built in Italy, it was first presented in public in April 2011.
The Van's Aircraft RV-14 is an American aerobatic kit aircraft designed by Richard VanGrunsven and produced by Van's Aircraft. It was introduced at AirVenture in July 2012. The aircraft is supplied as a kit for amateur construction.
The CubCrafters Carbon Cub EX is an American amateur-built aircraft, designed and produced by Cub Crafters of Yakima, Washington. The aircraft is supplied as a kit for amateur construction.
The Rans S-20 Raven is an American homebuilt aircraft that was designed by Randy Schlitter and is produced by Rans Designs of Hays, Kansas, introduced at AirVenture in August 2013. The aircraft is supplied as a kit for amateur construction and it is anticipated that it will later be offered as a complete ready-to-fly-aircraft in the light-sport aircraft category.
The CubCrafters CC18-180 Top Cub is an American light aircraft designed and produced by CubCrafters of Yakima, Washington, introduced in 2004. The aircraft is type certified and supplied complete and ready-to-fly.
The Vulcanair V1.0 is an Italian light aircraft, designed and produced by Vulcanair of Casoria, introduced at the AERO Friedrichshafen show in 2014. The aircraft is type certified by the European Aviation Safety Agency and the US Federal Aviation Administration and is supplied complete and ready-to-fly.
The Murphy Yukon is a Canadian amateur-built aircraft, produced by Murphy Aircraft of Chilliwack, British Columbia, introduced at the AirVenture show in 2007. The aircraft is supplied as a kit for amateur construction.
The Lancair Barracuda is an American amateur-built aircraft produced by Lancair of Uvalde, Texas. It was introduced at AirVenture in July 2018. The aircraft is supplied as a kit for amateur construction.
The Lancair Mako is an American amateur-built aircraft designed and produced by Lancair of Uvalde, Texas, introduced at AirVenture in 2017. The aircraft was first flown on 18 July 2017 and is supplied as a kit for amateur construction. It is named after the shark.
The Van's Aircraft RV-15 is an American amateur-built aircraft that is under development by Van's Aircraft of Aurora, Oregon. It was first publicly shown at the AirVenture airshow in July 2022. The aircraft is intended to be supplied as a kit for amateur construction, but as of July 2022 the company was not yet accepting deposits for delivery positions.
The Lewis Ascender is an American homebuilt bush aircraft designed by Alec Wild and Eric Lewis.
