Barham-class cruiser

Last updated
HMS Bellona 1890.jpg
Bellona in 1890
Class overview
NameBarham class
Builders
OperatorsNaval Ensign of the United Kingdom.svg  Royal Navy
Built1888–1891
In commission1890–1914
Completed2
Retired2
General characteristics
TypeThird class cruiser
Displacement1,800 long tons (1,830 t)
Length280 ft 0 in (85.34 m) lbp
Beam35 ft 0 in (10.67 m)
Draught4.04 m (13 ft 3 in)
Propulsion
  • 4 boilers
  • 2 steam engines
  • 2 propellers
Speed
  • 1890: 19 knots (35 km/h; 22 mph)
  • 1899: 18.5 knots (34.3 km/h; 21.3 mph)
Complement170
Armament
Armour
  • 1–2 in (2.5–5.1 cm) deck
  • 2 inches (5.1 cm) gun shields

The Barham-class cruiser was a series of two third-class cruisers operated by the Royal Navy between 1890 and 1914. Designed as a high-speed variant of the Barracouta-class cruiser for service in the Mediterranean and British waters, flaws in their boiler design led to frequent breakdowns and the abandonment of their original purpose. Instead, the two ships were reclassified as dispatch vessels and were eventually broken up after two decades of service.

Contents

Development and design

During the early 1880s, the Royal Navy worked to develop a new type of warship, known as the torpedo cruiser. Later designated as third-class cruisers, these vessels had the speed, size, and maneuverability to serve as a vanguard for ocean-going fleets of ironclads. In combat, doctrine called for the cruisers to sail ahead and engage enemy vessels, primarily torpedo boats, with their guns and underwater Torpedo tubes. After several iterations of designs, the Navy was concerned that the cruisers were too slow to serve their purpose in an engagement. One attempt to solve this issue was with the launching of the four Barracouta-class cruisers in 1888, themselves enlarged and faster versions of the torpedo gunboat HMS Curlew. Powered by two coal-fed three-cylinder vertical triple-expansion engines producing 3,000 indicated horsepower (2,200 kW), the Barracoutas reached a maximum speed of 16.5 knots (30.6 km/h; 19.0 mph). [1] [2]

While the Barracoutas were intended for service aboard, the Navy wanted even faster ships to serve in the Home Fleet or in the Mediterranean. The design's power was doubled to 6,000 ihp (4,500 kW) and was the hull was lengthened by 60 feet (18 m) to make room for more powerful locomotive boilers that produced a top speed of 19.5 knots (36.1 km/h; 22.4 mph). Known as the Barham class, the ships closely resembled the Barracouta design and were laid down mere months after them. The Barhams' main armament consisted of six 4.7-inch (120 mm) and four 3-pounder (1.4 kg) guns along with two machine guns and two 14-inch (360 mm) torpedo tubes fitted under the waterline. Their armour consisted of an armoured deck which was 0.98–2.01 inches (2.5–5.1 cm) thick and 2 in (5.1 cm) thick gunshields. To reach the top speed of 19.5 knots, six locomotive boilers fed by 140 tons of coal supplied two three-cylinder vertical triple expansion engines that turned two propellers. Each ship displaced 1,800 long tons (1,830 t) and was 280 feet 0 inches (85.34 m) long between perpendiculars, had a beam of 35 feet 0 inches (10.67 m), a draught of 13 feet 3 inches (4.04 m), and had a crew of 170. [2]

Service history

Two ships were built to the design: HMS Barham and Bellona, completed in 1890 and 1891, respectively. However, both encountered severe problems immediately. The boilers were placed under extreme strain when attempting to reach high speeds, leading to frequent breakdowns. Additionally, the rest of the machinery wore out quickly, making it nearly impossible to achieve their intended top speeds. Unable to fulfill their original purpose, the ships were reassigned as dispatch vessels, operating at a more manageable speed of 16 knots (30 km/h; 18 mph) and functioned as the British counterbalance to the French Forbin class. Between 1898 and 1899, both ships had their boilers replaced in an effort to address the speed issues. Equipped with Thornycroft 4,700 ihp (3,500 kW) boilers, the ships were able to regularly reach a speed of 18.5 knots (34.3 km/h; 21.3 mph). Despite the changes, Bellona was sold in 1906, and Barham in 1914. [2]

In 1887, the Royal Navy realized the need for cheap and long-range ships to protect Australia. The Barham design was enlarged and given a new battery to form the Pearl-class cruiser, which was envisioned as a cheap alternative to larger second-class cruisers. In 1893, the design was again revisited. Fitted with better boilers, new weapons, and a new hull, the new design became the Pelorus-class cruiser. [1]

Ships

NameBuilderLaid downLaunchedCompletedFateRef
Barham Portsmouth Drydock 22 October 188811 September 18891890Broken up, 1914 [2]
Bellona Hawthorn 188929 August 18901891Broken up, 1906 [2]

Related Research Articles

<i>Queen Elizabeth</i>-class battleship Class of British battleships

The Queen Elizabeth-class battleships were a group of five super-dreadnoughts built for the Royal Navy during the 1910s. These battleships were superior in firepower, protection and speed to their Royal Navy predecessors of the Iron Duke class as well as preceding German classes such as the König class. The corresponding Bayern-class ships were generally considered competitive, although the Queen Elizabeth class were 2 knots (3.7 km/h) faster and outnumbered the German class 5:2. The Queen Elizabeths are generally considered the first fast battleships of their day.

Town-class cruiser (1910) Class of light cruisers built for the Royal Navy (RN) and Royal Australian Navy

The Town class was a group of twenty-one light cruisers built for the Royal Navy (RN) and Royal Australian Navy (RAN) of the first half of the 20th century. These vessels were long-range cruisers, suitable for patrolling the vast expanse covered by the British Empire. These ships, initially rated as second class cruisers, were built to a series of designs, known as the Bristol, Weymouth, Chatham, Birmingham and Birkenhead classes – all having the names of British towns except for the RAN ships, which were named after Australian cities.

<i>Hawkins</i>-class cruiser Class of five heavy cruisers of the Royal Navy, designed in 1915

The Hawkins class consisted of five heavy cruisers built for the Royal Navy during the First World War, although none of them saw service during the war. The first ship to be completed, HMS Vindictive, was renamed from HMS Cavendish and converted into an aircraft carrier while under construction. All ships were named after Elizabethan sea captains. The three ships remaining as cruisers in 1939 served in the Second World War, with Effingham being an early war loss through wreck; Raleigh had been lost in a similar shipwreck on uncharted rocks in 1922. Vindictive, though no longer a cruiser, also served throughout the War. This class formed the basis for the definition of the maximum cruiser type under the Washington Naval Treaty of 1922.

<i>Chester</i>-class cruiser Class of American naval ships

The three Chester-class cruisers were the first United States Navy vessels to be designed and designated as fast "scout cruisers" for fleet reconnaissance. They had high speed but little armor or armament. They were authorized in January 1904, ordered in fiscal year 1905, and completed in 1908. In 1920 all scout cruisers were redesignated as "light cruisers" (CL).

<i>Scharnhorst</i>-class cruiser Class of armored cruisers of the German Imperial Navy

The Scharnhorst class was the last class of traditional armored cruisers built by the German Kaiserliche Marine. The class comprised two ships, Scharnhorst and Gneisenau. They were larger than the Roon-class cruisers that preceded them; the extra size was used primarily to increase the main armament of 21 cm (8.2 inch) guns from four to eight. The ships were the first German cruisers to reach equality with their British counterparts. The ships were named after 19th century Prussian army reformers, Gerhard von Scharnhorst and August von Gneisenau.

<i>Iris</i>-class cruiser

The Iris class consisted of two ships, HMS Iris and HMS Mercury, built for the Royal Navy in the 1870s. They were the first British all-steel warships.

HMS <i>Mercury</i> (1878) Cruiser of the Royal Navy

HMS Mercury was one of two Iris-class despatch vessels, later redesignated as second class cruiser built for the Royal Navy during the 1870s. The two ships were the first all-steel warships in the Royal Navy.

HMS <i>Iris</i> (1877) Cruiser of the Royal Navy

HMS Iris the lead ship of her class of two ships built for the Royal Navy in the 1870s. They were the first all-steel warships to serve with the Royal Navy.

<i>Katori</i>-class battleship Imperial Japanese Navys Katori-class of pre-dreadnought battleships

The Katori class was a two-ship class of pre-dreadnought battleships built for the Imperial Japanese Navy (IJN) in the early 1900s. As Japan lacked the industrial capacity to build such warships itself, they were designed and built in the UK. They were the last pre-dreadnought battleships to be built for Japan at overseas shipyards, and the last to be equipped with a ram. The ships were delivered after the end of the Russo-Japanese War of 1904–1905. They saw no action during World War I, although both were present when Japan joined the Siberian Intervention in 1918. They were disarmed and scrapped in 1923–1925 in accordance with the terms of the Washington Naval Treaty of 1922.

<i>Columbia</i>-class cruiser Class of American naval ships

The Columbia-class cruisers were two protected cruisers constructed in 1890 and 1891 and used by the United States Navy. They were lightly gunned ships with only moderate armor that were built for the speed needed to overtake and destroy the fast ocean liners of the day as commerce raiders. However, the light armament and armor left these ships over-specialized and outclassed by ordinary similar sized protected cruisers that they might encounter. Also, the engines were expensive to operate and at full power the ships' range was greatly decreased. Due to the ongoing size and speed race in ocean liners, by 1907 they were outclassed in speed by the ill-fated Lusitania and the German liner Kronprinzessin Cecilie.

SMS <i>Lussin</i> Torpedo cruiser of the Austro-Hungarian Navy

SMS Lussin was a torpedo cruiser of the Austro-Hungarian Navy, a modified version of the preceding Zara class. As envisaged by the Marinekommandant, Vice Admiral Friedrich von Pöck, Lussin would be the leader of a flotilla of torpedo boats, with the additional capability of carrying out scouting duties. The ship proved to be too slow and too lightly armed for either of these tasks, so she spent the majority of her career as a training ship for engine and boiler room personnel, along with occasional stints with the main fleet for training exercises. She took part in only one significant operation, an international blockade of Greece in 1886 to prevent the country from declaring war on the Ottoman Empire. In 1910–1913, Lussin was rebuilt as an admiralty yacht, and she spent World War I as a barracks ship for German U-boat crews based in Pola. After the war, she was ceded to Italy as a war prize, renamed Sorrento, and briefly saw service as a mother ship for MAS boats from 1924 to 1928, when she was discarded.

Russian battleship <i>Ekaterina II</i> Imperial Russian Navys Ekaterina II-class ironclad battleship

Ekaterina II was the lead ship of the Ekaterina II-class ironclad battleships built for the Imperial Russian Navy in the 1880s. Her crew was considered unreliable when the crew of the pre-dreadnought battleship Potemkin mutinied in June 1905 and her engines were decoupled from the propellers to prevent them from joining Potemkin. She was turned over to the Sevastopol port authorities before being stricken on 14 August 1907. She was re-designated as Stricken Vessel Nr. 3 on 22 April 1912 before being sunk as a torpedo target for the Black Sea Fleet.

<i>Challenger</i>-class cruiser Early 20th-century British naval ship class

The Challenger-class cruisers were a pair of second-class protected cruisers built for the Royal Navy in the first decade of the 20th century. One ship, HMS Encounter, was later transferred to the Royal Australian Navy.

<i>Topaze</i>-class cruiser

The Topaze-class cruisers were a quartet of third-class protected cruisers built for the Royal Navy in the first decade of the 20th century. HMS Amethyst of this class was the first warship larger than a destroyer to be powered by turbine engines.

<i>Cincinnati</i>-class cruiser Class of American naval ships

The Cincinnati-class cruisers were two small protected cruisers built for the United States Navy in the early 1890s. They were smaller and more lightly armed and protected than most previous US cruisers, and were intended for commerce raiding. They may also be referred to as Raleigh-class cruisers, as Raleigh was launched and commissioned prior to Cincinnati.

<i>Montgomery</i>-class cruiser Class of American naval ships

The Montgomery-class cruisers were three unprotected cruisers built for the United States Navy in the early 1890s. They had a thin water-tight protective deck, and also relied for protection upon their coal bunkers, cellulose packing, and numerous compartments. Roomy accommodations were provided for officers and crew, these cruisers being mainly intended for long cruises on distant stations.

<i>Goito</i>-class cruiser Torpedo cruiser class of the Italian Royal Navy

The Goito class was a group of four torpedo cruisers built for the Italian Regia Marina in the 1880s. The members of the class were Goito, Montebello, Monzambano, and Confienza. They were among the first torpedo cruisers built for the Italian fleet, and were built to improve on the previous vessel, Tripoli. Experimental ships, the four Goito-class vessels varied in their dimensions, machinery, and armament, though all were comparable in terms of capabilities, having a top speed of 17 to 18 knots and carrying an armament of four or five 14-inch (360 mm) torpedo tubes.

<i>Zara</i>-class cruiser (1879) Torpedo cruiser class of the Austro-Hungarian Navy

The Zara class was a class of three torpedo cruisers built for the Austro-Hungarian Navy in the late 1870s and early 1880s; they were the first large torpedo-armed warships built by Austria-Hungary. The class comprised three ships, Zara, Spalato, and Sebenico; the last vessel was built to a slightly different design, and is sometimes not counted as a member of the class. The design was prepared by Josef von Romako, the Chief Constructor of the Austro-Hungarian Navy, after a lengthy design process throughout the 1870s. The first two ships were armed with deck-mounted torpedo tubes, while Sebenico received an experimental tube in her bow, submerged below the waterline.

The Barracouta-class cruiser was a series of 4 third-class cruisers operated by the Royal Navy between 1890 and 1905. The ships were the first British cruisers to incorporate a number of features, such as an armored deck and quick-firing guns, as those designs were copied from other vessels. Two more vessels were built based on a lengthened version of the class. The ships mainly operated in the Mediterranean and British home waters before the entire class was scrapped.

<i>Curlew</i>-class torpedo gunboat Royal Navy gunboat (1886–1906)

The Curlew-class torpedo gunboat consisted of two "gun and torpedo vessels" operated by the Royal Navy between 1886 and 1906. Designed to be a torpedo cruiser the size of a gunvessel, the ships had a miserable career as the design was too slow and uneconomical for intended use. Regardless, the class served as the basis for further designs by the Royal Navy due to their novel roles. Due to their unique design, the ships have also been referred to as sloops or gunvessels.

References

  1. 1 2 Friedman, Norman (15 November 2012). British Cruisers of the Victorian Era. Naval Institute Press. ISBN   978-1591140689.
  2. 1 2 3 4 5 Conway's all the world's fighting ships, 1860-1905. Internet Archive. New York : Mayflower Books. 1979. p. 81. ISBN   978-0-8317-0302-8.{{cite book}}: CS1 maint: others (link)