Development | |
---|---|
Designer | Marc Lombard |
Location | France |
Year | 2003 |
No. built | 96 |
Builder(s) | Beneteau |
Role | One design racer |
Name | Beneteau Figaro 2 |
Boat | |
Crew | One |
Displacement | 6,724 lb (3,050 kg) |
Draft | 6.50 ft (1.98 m) |
Hull | |
Type | monohull |
Construction | glassfibre |
LOA | 32.18 ft (9.81 m) |
LWL | 32.00 ft (9.75 m) |
Beam | 11.33 ft (3.45 m) |
Engine type | Volvo MD2020 20 hp (15 kW) diesel engine |
Hull appendages | |
Keel/board type | Fin keel with a swept, weighted bulb |
Ballast | 2,425 lb (1,100 kg) |
Rudder(s) | Dual spade-type rudders |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 42.75 ft (13.03 m) |
J foretriangle base | 12.42 ft (3.79 m) |
P mainsail luff | 42.67 ft (13.01 m) |
E mainsail foot | 15.42 ft (4.70 m) |
Sails | |
Sailplan | 7/8 Fractional rigged sloop |
Mainsail area | 409 sq ft (38.0 m2) |
Jib/genoa area | 323 sq ft (30.0 m2) |
Spinnaker area | 915 sq ft (85.0 m2) |
Upwind sail area | 732 sq ft (68.0 m2) |
Downwind sail area | 1,324 sq ft (123.0 m2) |
Racing | |
PHRF | 57 |
The Beneteau Figaro 2 or Beneteau Figaro II, officially designated as the Figaro Beneteau II, is a French sailboat that was designed by Marc Lombard as a one design, single-handed, off-shore racer for the Solitaire du Figaro race and first built in 2003. The boat and the race are named for the race's sponsor, the French newspaper Le Figaro. [1] [2] [3] [4] [5] [6] [7] [8] [9]
The boat replaced the Beneteau Figaro in the Solitaire du Figaro and was in turn replaced by the Beneteau Figaro 3 in 2016. [1] [2] [3] [4] [10] [11] [12] [13] [14] [15]
The design was built by Beneteau in France, from 2003 to 2018 with 96 boats completed over the 15 year production run. [1] [2] [3] [4] [16] [17] [18]
The Figaro 2 is a racing keelboat, built predominantly of glassfibre, carbon fibre and Airex foam. It has a 7/8 fractional sloop rig, with a deck-stepped mast, two sets of 20° swept spreaders and a carbon fibre mast with an aluminium boom with stainless steel rod standing rigging. The hull has a plumb stem, an open reverse transom, twin internally mounted spade-type rudders controlled by a tiller and a fixed fin keel with a swept, weighted bulb. It displaces 6,724 lb (3,050 kg) and carries 2,425 lb (1,100 kg) of ballast. The ballast consists of lead in the keel and two lateral hull water ballast tanks, which each hold 58.1 U.S. gallons (220 L; 48.4 imp gal). [1] [2] [3] [4]
The boat has a draft of 6.50 ft (1.98 m) with the standard keel. [1] [2] [3]
The boat is fitted with a Swedish Volvo MD2020 diesel engine of 20 hp (15 kW) for docking and manoeuvring. The fuel tank holds 10 U.S. gallons (38 L; 8.3 imp gal). [1] [2] [3] [4]
The design has sleeping accommodation for four people in a minimalist interior. For sailing downwind the design may be equipped with a symmetrical spinnaker of 915 sq ft (85.0 m2). The design has a hull speed of 7.61 kn (14.09 km/h) and a PHRF handicap of 57. [1] [2] [3] [4] [19]
The boat is supported by an active class club that organizes racing events, the Classe Figaro Bénéteau. [20] [21]
In a 2016 interview, the designer explained the boat's philosophy, "that's pretty simple: We had to find the balance between the task of meeting the tight selling price of 100.000 Euros ex VAT and at the same time the obligation to offer the best technology and innovation we could afford in that budget. You know, for an A category CE-boat at this time the minimum weight possible was three tons. This also meant we´ve had to go for a relatively high draught, had the minimum weight and a certain stability requirement with full ballast and a minimum length of 10 meters to fit the A category. We also wanted lateral ballast, because a canting keel was at that time far out of target budget – yet high stability was needed for single- or double-handed sailing. For that same reason we have not been able to convince the people at Beneteau to go for a bowsprit with high roach main, asymmetrical spinnaker. In the end, we nevertheless kept innovation factor high: The Figaro II features a double rudder for large directional stability and controllability single-handed, it's still a very light construction. We can add stability with the ballast system and have a carbon mast for speed – to sum it up, it´s a strong one design-rule for having a boat for a good, exciting competition." [22]
In a 2013 review for boats.com, Rupert Holmes named the design one of the best Beneteau yachts, stating, "the Figaro ll, however, was conceived in 2003 as an out-and-out racer for the high profile annual 1,500 mile single-handed Solitaire du Figaro race. It is now seen as an iconic, especially in France, where the race has a strong public following and successful skippers are household names. The boat combines light weight with plenty of power and twin rudders for downwind control at high speeds – skippers will continue to sail with spinnakers in near gale-force conditions, often achieving speeds of more than 20 knots." [23]
The Farr 30, originally called the Mumm 30, is a sailboat that was designed by Bruce Farr as a one design racer and first built in 1995.
The Beneteau Figaro, also called the Figaro I, the Figaro Solo and officially designated as the Figaro Beneteau, is a French sailboat that was designed by Groupe Finot and Jean Berret as a one design, single-handed, off-shore racer especially for the Solitaire du Figaro race and first built in 1990. The boat and the race are both named for the sponsor of the race, the French newspaper Le Figaro.
The Beneteau Figaro 3, officially called the Figaro Beneteau 3, is a French hydrofoil-equipped sailboat that was designed by Van Peteghem/Lauriot-Prevost as a one design racer specifically for the Solitaire du Figaro race and first built in 2018. The boat and the race are named for the race's sponsor, the French newspaper Le Figaro.
The Beneteau 311, also called the Oceanis 311 and Oceanis 311 Clipper, is a French sailboat that was designed by Groupe Finot as a cruiser and first built in 1997 as a 1998 model year. The design was also sold as the Stardust 311 for the yacht charter market. The same hull design also served as the basis for the Figaro Solo, the Beneteau First 310, Beneteau First 31.7 and the Beneteau Oceanis 300.
The Beneteau 34.7, also sold as the First 34.7 and the First 10R, is a French sailboat that was designed by Bruce Farr as a cruiser-racer, optimized for International Rating Certificate racing and first built in 2005.
The Beneteau 343, also called the Beneteau Oceanis 343 is a French sailboat that was designed by Berret-Racoupeau as a cruiser-racer and first built in 2004 as a 2005 model year.
The Beneteau 44 CC, also called the Oceanis 44 CC, is a French sailboat that was designed by Bruce Farr as a cruiser and first built in 1994. The interior was designed by Armel Briand.
The Beneteau 46, also sold as the Oceanis 46, is a French sailboat that was designed by Berret-Racoupeau as a cruiser and first built in 2007. The interior was designed by Nauta Design.
The Beneteau 461, also called the Oceanis 461, is a French sailboat that was designed by Bruce Farr as a cruiser and first built in 1996. Armel Briand designed the interior. With optional equipment included as standard it was known as the Oceanis Clipper 461.
The Beneateau First 42, marketed in the United States as the Beneteau R/C 42, is a French sailboat that was designed by Germán Frers as a racer-cruiser and first built in 1981.
The Beneteau First 305 is a French sailboat that was designed by Jean Berret as a cruiser-racer and first built in 1984.
The Beneteau Evasion 22 is a French sailboat that was designed by André Bénéteau as a motorsailer and first built in 1980.
The Beneteau Evasion 25 is a French sailboat that was designed by André Bénéteau as a motorsailer and first built in 1977 as a 1978 model year. It was sold in the United States as the Beneteau M/S 25.
The Beneteau Evasion 28 is a French sailboat that was designed by André Bénéteau as a motorsailer and first built in 1975.
The Beneteau Evasion 29 is a French sailboat that was designed by André Bénéteau as a motorsailer and first built in 1980.
The Beneteau Evasion 32 is a French sailboat that was designed by André Bénéteau as an motorsailer and first built in 1973. The design was the first produced of the series of Evasion motorsailers. It was sold in the United States as the Beneteau M/S 32.
The Beneteau Evasion 34 is a French sailboat that was designed by André Bénéteau as a motorsailer and first built in 1980.
The First 18 is a French trailerable sailboat that was designed by Groupe Finot as a Micro Class racer-cruiser and day sailer and first built in 1978.
The Beneteau First 18 SE, previously called the Beneteau First 18 and the Seascape 18, is a French trailerable sailboat that was designed by Samuel Manuard as a planing one design racer-cruiser and first built in 2008. The industrial design work was done by Gigodesign.
The Beneteau First 20 is a French trailerable sailboat that was designed by Finot/Conq as a cruiser-racer and first built in 2011.