 | This article needs additional citations for verification .(December 2016) |
| S-13 | |
|---|---|
| Role | High-altitude reconnaissance aircraft |
| National origin | Soviet Union |
| Design group | Beriev |
| Status | Development ceased |
| Number built | 0 (1 unfinished prototype) |
| Developed from | Lockheed U-2 |
The Beriev S-13 was a Soviet reverse-engineered copy of the Lockheed U-2C, developed in the Soviet Union in the early 1960s.
On 1 May 1960, Francis Gary Powers flew a U-2 espionage mission from northern Pakistan over the Soviet Union. While flying over the Urals, the aircraft came within range of Soviet surface-to-air missiles. The U-2 was hit by an S-75 Dvina missile (NATO code name: SA-2 Guideline) and broke apart, but the debris remained relatively intact. The Soviet Union had its own comparable high altitude reconnaissance aircraft, the Yakovlev Yak-25RW, but for political reasons this high-altitude reconnaissance aircraft was not used outside the borders of the Soviet Union and its main function was to emulate the U-2 to train Soviet air defence forces. The Yakovlev Yak-25RV was unable to reach the U-2's ceiling of 21,335–25,900 m (69,997–84,974 ft). [1]
After the U-2 shootdown, the wreckage was examined by Soviet aviation specialists. The investigation, conducted by Georgy Beriev of OKB-49 at Taganrog, led to a decision of the Council of Ministers of the Soviet Union on 28 June 1960 that the aircraft and its Pratt & Whitney J75-P-13 engine should be copied. OKB-16 in Kazan, led by Professor F. Zubets, reverse-engineered the engine under the designation RD-16-75. [2] On 23 August 1960, the USSR Council of Ministers ordered five aircraft (to be designated S-13), two of which were to be made available to the Air Force after completing trial flights.
The timetable was very tight, as it was planned to examine all the components of the U-2 and to copy them while following the standards of Soviet military aviation, including the AFA-60 camera system. The S-13 was to be used for aerial reconnaissance, for weather research and as a balloon interceptor.
On 1 April 1961, the first fuselage was completed. However, on 12 May 1962 the Council of Ministers cancelled the project with immediate effect, when it was realized that the United States and its allies, like the Soviet Union, could shoot down slow-moving targets even at high altitude. For large-scale, long-term surveillance, spy satellites were a better solution. For short-term, ad hoc reconnaissance, the Soviet Union, like the United States with the Lockheed SR-71 Blackbird, preferred high-speed reconnaissance aircraft, such as the Tsybin RSR. Although no S-13 aircraft was actually completed, the S-13 program gave valuable insights into alloys, materials and processing methods that were subsequently utilized in new Soviet aircraft designs. [3] Parts of the U-2 were exhibited in the Central Museum of the Armed Forces at Monino in Moscow.
General characteristics
Performance
The PJSC Beriev Aircraft Company, formerly Beriev Design Bureau, is a Russian aircraft manufacturer, specializing in amphibious aircraft.
The Yakovlev Yak-25 is a swept wing, turbojet-powered interceptor and reconnaissance aircraft built by Yakovlev and used by the Soviet Union.
The Yakovlev Yak-2 was a short-range Soviet light bomber/reconnaissance aircraft used during World War II. It was produced in small numbers, and most of them were destroyed during the opening stages of Operation Barbarossa.
The Yakovlev Yak-1 was a Soviet fighter aircraft of World War II. The Yak-1 was a single-seat monoplane with a composite structure and wooden wings; production began in early 1940.
The Yakovlev Yak-15 is a first-generation Soviet turbojet fighter developed by the Yakovlev design bureau (OKB) immediately after World War II. The main fuselage was that of Yakovlev Yak-3 piston-engine fighter modified to mount a reverse-engineered German Junkers Jumo 004 engine. The Yak-15 and the Swedish Saab 21R were the only two jets to be successfully converted from piston-power to enter production. 280 aircraft were built in 1947. Although nominally a fighter, it was mainly used to qualify piston-engine-experienced pilots to fly jets.
The Yakovlev Yak-19 was a prototype Soviet fighter built in the late 1940s. It was the first Soviet aircraft to be equipped with an afterburning turbojet, the Klimov RD-10F that was derived from the German Jumo 004 engine. Only two examples were built as it was rejected for service by the Soviet Air Force.
The Yakovlev Yak-44 was a proposed twin-turboprop Airborne Early Warning (AEW) aircraft, resembling the United States Navy's E-2 Hawkeye, intended for use with the Soviet Navy's Ulyanovsk class supercarriers. Along with the aircraft carrier it would have flown from, the Yak-44 was cancelled after the demise of the Soviet Union. A full-scale mockup with foldable wings was built.
The Yakovlev Yak-25 was a Soviet military aircraft, an early turbojet-powered fighter aircraft designed by the Yakovlev OKB. The designation was later reused for a different interceptor design. Tasked by the Council of Ministers in a directive issued on 11 March 1947, with producing a straight winged fighter similar to the earlier Yak-19, but powered by a Rolls-Royce Derwent V, OKB-115 swiftly produced the Yak-25, which blazed several trails as the first Soviet fighter with a fully pressurised cockpit, air conditioning, jettisonable canopy, and hydraulic airbrakes on the fuselage amongst other innovations.
The Yakovlev Yak-30 was an experimental Soviet interceptor from the late 1940s. Derived from the Yak-25, from which it differed primarily in having wings sweptback 35° at quarter chord, the Yak-30 retained the fuselage, tail surfaces and undercarriage of the earlier fighter.
The Yakovlev Yak-53 was a single seat aerobatic trainer aircraft produced in the USSR during 1981/2. Only one prototype was produced.
The Lavochkin La-160, known as Strelka (Arrow), was the first Soviet swept-winged jet fighter research prototype. It was designed and manufactured by the Lavochkin Design Bureau from 1946. USAF reporting name - Type 6
The Yakovlev Yak-5 was an experimental trainer aircraft designed by Yakovlev OKB in the Soviet Union, and first flown in 1944.
The Yakovlev Yak-8 was a Soviet utility aircraft developed during World War II. It was not accepted for production, but received the NATO reporting name "Crib" anyway.
This is a glossary of acronyms and initials used for miscellaneous items, materials and nicknames in the Russian Federation and formerly the USSR. The Latin-alphabet names are phonetic representations of the Cyrillic originals, and variations are inevitable.
This is a glossary of acronyms and initials used for aero-engines and aircraft equipment in the Russian Federation and formerly the USSR. The Latin-alphabet names are phonetic representations of the Cyrillic originals, and variations are inevitable.
This is a Glossary of acronyms used for aircraft designations in the Russian Federation and formerly the USSR. The Latin-alphabet names are phonetic representations of the Cyrillic originals, and variations are inevitable.
This is a glossary of acronyms and initials used for avionics and aircraft instruments in the Russian Federation and formerly the USSR. The Latin-alphabet names are phonetic representations of the Cyrillic originals, and variations are inevitable.
This is a glossary of acronyms and initials used for aircraft weapons in the Russian Federation and formerly the USSR. The Latin-alphabet names are phonetic representations of the Cyrillic originals, and variations are inevitable.
The Yakovlev AIR-6 was a Soviet light utility aircraft of the 1930s. It was a single-engined high-wing monoplane designed by Alexander Sergeyevich Yakovlev, with 128 being built.
The Tupolev Voron was a planned supersonic unmanned reconnaissance aircraft of the Soviet Union manufactured by the company Tupolev, largely based on or designed to compete with the Lockheed D-21.