Company type | Private |
---|---|
Industry | Health Care |
Founded | Warsaw, IN, USA (1977) |
Headquarters | Warsaw, IN, USA |
Key people | Dane Miller, Founder |
Products | Oxford Partial Knee, LactoSorb |
Owner | Blackstone Group, Goldman Sachs, Kohlberg Kravis Roberts, TPG Capital |
Number of employees | 9,200 (2007) |
Website | www.biomet.com |
Biomet, Inc., was a medical device manufacturer located in the Warsaw, Indiana, business cluster. The company specialized in reconstructive products for orthopedic surgery, neurosurgery, craniomaxillofacial surgery and operating room supplies. In 2015, Biomet became part of the new company Zimmer Biomet. [1]
Biomet was established in 1977 and delivered its first hip replacement in 1978. The four founders of Biomet were: Dane A. Miller, [2] Ray Harroff, Niles Noblitt, and Jerry Ferguson. [3] In a September 2007 club deal, the company was acquired by a consortium of private equity firms consisting of The Blackstone Group, Goldman Sachs, Kohlberg Kravis Roberts L.P. and TPG Capital, after which Biomet ceased trading on NASDAQ. [4]
In April 2014, it was announced that Zimmer Holdings had succeeded in a bid to acquire Biomet for a fee of $13.4 billion. However, in October 2014, EU antitrust regulators opened an investigation into Zimmer's bid on the grounds that the deal may lead to substantial decreases in competition in certain markets. [5] The verdict of the investigation into the deal that would make Zimmer the world's second-largest seller of orthopaedic products behind Johnson & Johnson allowed the merger to take place in June 2015. [6]
Biomet manufactured reconstructive products for orthopedic surgery, such as hips, knees and shoulders, fixation devices, orthopedic support devices. It also made spinal implants, dental implants, and general operating instruments. Its subsidiary, Biomet Microfixation, manufactured mainly craniomaxillofacial and neurosurgical products. [7] These included LactoSorb, a fixation system made of completely resorbable material for guided bone regeneration, titanium plates and screws for craniomaxillofacial fixation, instruments for craniomaxillofacial and orthopedic procedures and hard tissue replacements made out of biocompatible polymers, as used in cranial defects. Biomet began using polymethylmethacrylate (PMMA) beads, which are fused together with polyhydroxyethylmethacrylate (PHEMA) for cranial plates, in 1993. [8] : 4 The other material is polyetherketoneketone (PEKK), formed either by laser sintering or by 3D printing. [9]
In 2012, Biomet paid more than $22 million to settle SEC and Department of Justice violations of the Foreign Corrupt Practices Act (FCPA). From 2000 to August 2008 Biomet bribed publicly employed doctors in Argentina, Brazil, and China with up to 15-20% of the sale. The four subsidiaries involved were Biomet Argentina SA, U.S. subsidiary Biomet International, Biomet China and Scandimed AB. [10]
Incomplete section. In 2017 Biomet was again convicted. This second conviction was backed by another violation of the FCPA that was discovered in 2013. [11]
These violations are also correlated with the first time a whistleblower received monetary compensation for reporting an entity to the SEC that led to a successful conviction.
Stryker Corporation is an American multinational medical technologies corporation based in Kalamazoo, Michigan. Stryker's products include implants used in joint replacement and trauma surgeries; surgical equipment and surgical navigation systems; endoscopic and communications systems; patient handling and emergency medical equipment; neurosurgical, neurovascular and spinal devices; as well as other medical device products used in a variety of medical specialties.
The Foreign Corrupt Practices Act of 1977 (FCPA) is a United States federal law that prohibits U.S. citizens and entities from bribing foreign government officials to benefit their business interests.
Osseointegration is the direct structural and functional connection between living bone and the surface of a load-bearing artificial implant. A more recent definition defines osseointegration as "functional ankylosis ", where new bone is laid down directly on the implant surface and the implant exhibits mechanical stability. Osseointegration has enhanced the science of medical bone and joint replacement techniques as well as dental implants and improving prosthetics for amputees.
Image-guided surgery (IGS) is any surgical procedure where the surgeon uses tracked surgical instruments in conjunction with preoperative or intraoperative images in order to directly or indirectly guide the procedure. Image guided surgery systems use cameras, ultrasonic, electromagnetic or a combination of fields to capture and relay the patient's anatomy and the surgeon's precise movements in relation to the patient, to computer monitors in the operating room or to augmented reality headsets. This is generally performed in real-time though there may be delays of seconds or minutes depending on the modality and application.
Bio-Rad Laboratories, Inc. is an American developer and manufacturer of specialized technological products for the life science research and clinical diagnostics markets. The company was founded in 1952 in Berkeley, California, by husband and wife team David and Alice Schwartz, both graduates of the University of California, Berkeley. Bio-Rad is based in Hercules, California, and has operations worldwide.
Smith & Nephew plc, also known as Smith+Nephew, is a British multinational medical equipment manufacturing company headquartered in Watford, England. It is an international producer of advanced wound management products, arthroscopy products, trauma and clinical therapy products, and orthopaedic reconstruction products. Its products are sold in over 100 countries. It is listed on the London Stock Exchange and is a constituent of the FTSE 100 Index.
Zimmer Biomet Holdings, Inc. is a publicly traded medical device company. It was founded in 1927 to produce aluminum splints. The firm is headquartered in Warsaw, Indiana, where it is part of the medical devices business cluster.
Bone cements have been used very successfully to anchor artificial joints for more than half a century. Artificial joints are anchored with bone cement. The bone cement fills the free space between the prosthesis and the bone and plays the important role of an elastic zone. This is necessary because the human hip is acted on by approximately 10–12 times the body weight and therefore the bone cement must absorb the forces acting on the hips to ensure that the artificial implant remains in place over the long term.
The AO Foundation is a nonprofit organization dedicated to improving the care of patients with musculoskeletal injuries or pathologies and their sequelae through research, development, and education of surgeons and operating room personnel. The AO Foundation is credited with revolutionizing operative fracture treatment and pioneering the development of bone implants and instruments.
OsteoMed L.P., formerly known as OsteoMed Corporation, is a medical device manufacturer specializing in craniofacial titanium fixation, small bone drills and saws, and a variety of implantable devices used in foot and ankle surgery. OsteoMed's focus is on neurosurgery, reconstructive plastic surgery, oral surgery, podiatry, and foot and ankle orthopedics.
Synthes Holding AG is a multinational medical device manufacturer based in Solothurn, Switzerland and West Chester, Pennsylvania, United States. It is the world's largest maker of implants to mend bone fractures, and also produces surgical power tools and advanced biomaterials.
LimaCorporate is a medical device company based in Italy, it manufactures joint implants, extremities and fixation. In 2021, the company delivered 3D printing to a hospital setting. Both Italian production plants of LimaCorporate have been certified ISO 14001.
ROSA is a medical robotic technology, designed to minimize invasiveness of surgeries of the central nervous system. ROSA robots assist health professionals during surgical procedures.
Dane A. Miller was an American business executive. Miller was co-founder of the orthopedic company Biomet and was its president and chief executive from 1978 to 2006.
Zimmer Biomet Robotics, formerly Medtech SA, is a robotic surgery company founded in 2002 by Bertin Nahum and based in Montpellier, France (Hérault department, in southern France. This company designs, develops and markets robotic assistance for surgical procedures of the central nervous system and other applications such as the knee.
Bertin Nahum is a French-Beninese entrepreneur in surgical robotics. He is the CEO and co-founder of Quantum Surgical based in Montpellier, France. He previously founded in 2002 Medtech S.A; specialized in the design, development and marketing of surgical assistance robots that was sold to Zimmer Biomet in 2016.
Globus Medical, Inc. is a publicly traded medical device company headquartered in Audubon, Pennsylvania, United States. Globus is focused on the design, development, and commercialization of products that enable surgeons to promote healing in patients with musculoskeletal disorders.
Neuroplastic or neuroplastic and reconstructive surgery is the surgical specialty involved in reconstruction or restoration of patients who undergo surgery of the central or peripheral nervous system. The field includes a wide variety of surgical procedures that seek to restore or replace a patient's skull, face, scalp, dura, the spine and/or its overlying tissues.
NuVasive, Inc. is a medical devices company based in San Diego, California. Founded in 1997, it primarily develops medical devices and procedures for minimally invasive spine surgery.
Integra LifeSciences Holdings Corporation is a global medical device manufacturing company headquartered in Princeton, New Jersey. Founded in 1989, the company manufactures products for skin regeneration, neurosurgery, reconstructive and general surgery. Integra artificial skin became the first commercially reproducible skin tissue used to treat severe burns and other skin wounds.