| Z.515 | |
|---|---|
 | |
| Role | Reconnaissance bomber |
| National origin | Italy |
| Manufacturer | Cantieri Aeronautici e Navali, Triestini (CANT) |
| Designer | Filippo Zappata |
| First flight | 1939 |
| Number built | 11 |
The CANT Z.515 was a twin engine monoplane floatplane designed and built for maritime reconnaissance in Italy at the start of World War II. It did not go into service.
The Z.515 (Z denoting a Zappata design) was the result of a requirement for a reconnaissance seaplane with light bombing capability. It was smaller and lighter than the established CANT Z.506 reconnaissance bomber, which was a three engine aircraft. [1]
The Z.515 was a cantilever low wing monoplane with straight tapered wings of noticeable dihedral and rounded tips. There were flaps inboard of the ailerons. Twin 560 kW (750 hp) V-12 Isotta-Fraschini Delta engines were mounted well forward of the leading edge with their thrust line in the wing plane. The fairings behind engine mountings on the wing underside extended aft to near the trailing edge; the rear engine mounting also supported the forward attachment points for the rearward sloping, N-form struts to the two long, single stepped floats. The floats were laterally braced by inverted-V struts to the bottom of the fuselage. The Z.515's tailplane was mounted on top of the fuselage with greater dihedral than the wing and carrying endplate fins. The horizontal surfaces were straight tapered and the elevators, like the rudders had trim tabs. The vertical surfaces were almost elliptical, split roughly equally between fin and unbalanced rudder. [1]
The lower nose of the Z.515 was completely glazed, with the long cockpit largely forward of the wing leading edge. There was a low dorsal machine gun turret at mid-chord and three further lower calibre machine guns. Up to 600 kg (1,320 lb) of bombs could be carried. [1]
The CANT Z.515 first flew in 1939 but was not developed further. [1] Some sources [2] [3] suggest a first flight date of 8 or 9 July 1940. The Regia Aeronautica approved the production of the Z.515 in 1941 with 64 aircraft ordered from CANT, and 50 from Aeronautica Sicula, a company in Palermo. Only ten were completed. [4]
Data from Italian Civil and Military Aircraft 1930-1945 [1]
General characteristics
Performance
Armament
The CANT Z.1007 Alcione (Kingfisher) was an Italian three-engined medium bomber, with wooden structure. Designed by Filippo Zappata, who also designed the CANT Z.506 it had "excellent flying characteristics and good stability" and was regarded by some as "the best Italian bomber of World War II" although its wooden structure was easily damaged by the climate, as experienced in North Africa and in Russia. It was used by the Italian Regia Aeronautica, Italian Co-Belligerent Air Force, Aeronautica Nazionale Repubblicana and Luftwaffe during World War II.
The CANT Z.501 Gabbiano was a high-wing central-hull flying boat, with two outboard floats. It was powered by a single engine installed in the middle of the main-plane and had a crew of 4–5 men. It served with the Italian Regia Aeronautica during World War II, as a reconnaissance aeroplane. During its debut in 1934, it set a world distance record. It was obsolete by 1940, but was still used throughout World War II, suffering many losses. A few remained in service until 1949.
The Breda A.7 was a reconnaissance aircraft developed in Italy for use by the Regia Aeronautica in 1929. It was a braced parasol monoplane of conventional configuration with tailskid undercarriage. The pilot and observer sat in tandem, open cockpits. A single prototype of a long-range example, originally designated A.7 Raid and later A.16 was also constructed, but the air force showed no interest in it.
The Savoia-Marchetti SM.78 was an Italian bomber/reconnaissance biplane flying boat of the early 1930s.
The Caproni Ca.111 was a long-range reconnaissance aircraft and light bomber produced in Italy during the 1930s. It was a derivative of the Ca.101.
The Piaggio P.32 was an Italian medium bomber of the late 1930s, produced by Piaggio, and designed by Giovanni Pegna. It was a modern design for its time, but was a failure due to lack of powerplants commensurate with its high wing loading.
The Caproni Ca.73 was an Italian airliner produced during the 1920s which went on to serve as a light bomber in the newly independent Regia Aeronautica. It was an inverted sesquiplane with a biplane tail and two engines mounted in a push-pull configuration within a common nacelle mounted on struts in the interplane gap above the fuselage. The two pilots sat in an open cockpit, while ten passengers could be accommodated within the fuselage.
The Savoia-Marchetti S.59 was a 1920s Italian reconnaissance/bomber flying boat designed and built by Savoia-Marchetti for the Regia Aeronautica.
The Caproni Ca.355 Tuffo was a low wing single-engine dive bomber, designed and built by the Italian Caproni company in 1941, which never proceeded beyond a single prototype. Derived from Ca.335 Mistral, the Ca.355 was proposed to equip the Regia Aeronautica, but it was found to offer little advantage over the German Junkers Ju 87 "Stuka" and the project was abandoned.
The Caproni Ca.331 Raffica was an Italian aircraft built by Caproni in the early 1940s as a tactical reconnaissance aircraft/light bomber and also as a night fighter.
The Piaggio P.50 was an Italian prototype heavy bomber designed and built by Piaggio for the Regia Aeronautica.
The twin-engined CANT Z.1011 was one of two bombers of about the same size and powered by the same engines, designed by Filippo Zappata in the mid-1930s. The other was the three-engined CANT Z.1007, which in the end was the type preferred by the Regia Aeronautica.
The Caproni Ca.350 was an Italian single-engined project for a two-seat fighter-bomber/reconnaissance aircraft of the 1930s. Designed by Cesare Pallavicino to meet a requirement of the Regia Aeronautica, it was an innovative and fast design, to have been powered by an Isotta Fraschini Zeta R.C.42, but no aircraft were built.
The CANSA FC.20 was a twin engine reconnaissance bomber/ground attack monoplane designed and built in Italy in 1941. Several versions with different armament and engines were flown but only the FC.20bis ground attack variant reached squadron service, in very small numbers, before the 1943 armistice.
The Caproni Ca.95 was a large, three engine, long range, heavy bomber prototype built in Italy in 1929. It could carry a 1,600 kg (3,500 lb) bomb load and had three defensive gun positions. Only one was built.
The Caproni Ca.61 was an Italian heavy day bomber aircraft of 1922. It was the final development of the Caproni three engine, twin boom biplane types developed during World War I, but it was not put into production.
The Caproni Ca.134 was a biplane reconnaissance aircraft built by the Italian company Caproni in the 1930s.
The CANT Z.516 was a three engine monoplane floatplane designed in Italy at the start of World War II. It did not go into service.
The Macchi M.C.77 was a reconnaissance bomber flying boat built by Macchi in the thirties and remained at the prototype stage.
The Caproni Ca.66 and Caproni Ca.67 were Italian night bomber aircraft designed to re-equip the post-World War I Regia Aeronautica.
 | Wikimedia Commons has media related to CANT Z.515 . |
